Skip to the content

MTP125-1111R1

MINTRONExtended

-40℃~+105℃ 1 11P 1x11P 2.54mm 2.5mm 3A 6mm Brass Right Angle Square pin Push-Pull,P=2.54mm Pin Headers ROHS

Part id
mintron/MTP125-1111R1
Category
Pin Headers
Package
弯插,P=2.54mm
Pins
5
In stock
100 at JLCPCB (C53959048)

Overview

The MTP125-1111R1 is a pin Header made by MINTRON in a 弯插,P=2.54mm package with 5 pins. -40℃~+105℃ 1 11P 1x11P 2.54mm 2.5mm 3A 6mm Brass Right Angle Square pin Push-Pull,P=2.54mm Pin Headers ROHS.

PCBKit's library has its KiCad symbol (Connector_Generic:Conn_01x11, from KiCad's library) and its footprint (Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Horizontal, from KiCad's library), ready for a KiCad board. 100 are in stock at JLCPCB (part C53959048).

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MTP125-1111R1?

Yes. The symbol is Connector_Generic:Conn_01x11 and the footprint Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Horizontal, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MTP125-1111R1?

弯插,P=2.54mm, with 5 pins. Its footprint is drawn on this page.

Where can I order the MTP125-1111R1?

JLCPCB lists it as part C53959048, with 100 in stock; the sellers' links on this page open their listings.

What can replace the MTP125-1111R1?

Parts like it in the library: the 2011-1X11G00LB by WingTAT, the MTP125-1111S1 by MINTRON, the 2011-1X11G00SB by WingTAT and the MTP125-1111R2 by MINTRON. Check their datasheets: a part that fits the footprint may still differ in its ratings.