
Ulx3s mixer
jamesrosssharp/ulx3s_mixer_pcb
PCB for implementing a 100MHz PLL and mixer for ULX3s
Mini-CircuitsExtended
-40℃~+85℃ 40mA 7.2dB SMD-6P RF Mixers ROHS
The ADEX-10L+ is a RF Mixer made by Mini-Circuits in a SMD-6P package with 6 pins. -40℃~+85℃ 40mA 7.2dB SMD-6P RF Mixers ROHS.
PCBKit's library has its KiCad symbol (RF_Mixer:ADEX-10, from KiCad's library) and its footprint (RF_Mini-Circuits:Mini-Circuits_CD542_LandPatternPL-052, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C118997). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | IF | Output |
| 3 | RF | Input |
| 4 | GND | Passive |
| 5 | GND | Passive |
| 6 | LO | Input |

jamesrosssharp/ulx3s_mixer_pcb
PCB for implementing a 100MHz PLL and mixer for ULX3s

gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
Yes. The symbol is RF_Mixer:ADEX-10 and the footprint RF_Mini-Circuits:Mini-Circuits_CD542_LandPatternPL-052, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD-6P, with 6 pins. Its footprint is drawn on this page.
Mini-Circuits publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C118997, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ADEX-10L by Mini-Circuits and the ADEX-10H+ by Mini-Circuits. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.