2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59
TC7660SCPA
Microchip TechnologyExtended
0℃~+70℃ 1.5V~12V 10kHz 60Ω 80uA 98% Inverted Not supported PDIP-8 Charge Pumps ROHS
- Part id
- microchip/TC7660SCPA
- Category
- Charge Pumps
- Package
- PDIP-8
- Pins
- 8
- In stock
- 0 at JLCPCB (C182943)
- Used on
- 2 open-source boards
Overview
The TC7660SCPA is a charge Pump made by Microchip Technology in a PDIP-8 package with 8 pins. 0℃~+70℃ 1.5V~12V 10kHz 60Ω 80uA 98% Inverted Not supported PDIP-8 Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (4ms_IC:TC7660S, from 4ms) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C182943). 2 open-source boards in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | BOOST | Power in |
| 2 | CAP+ | Input |
| 3 | GND | Power in |
| 4 | CAP- | Input |
| 5 | VOUT | Power out |
| 6 | LV | Input |
| 7 | OSC | Input |
| 8 | V+ | Power in |
Open-source boards using it
2- 2 layers
Psoc5power2
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
93 parts59
Parts like it
8
XD7660
DIP-8-10V~-1.5V -40℃~+85℃ 1.5V~10V 160uA 60Ω 98% Inverted DIP-8 Charge Pumps ROHSXINLUDACharge PumpsICL7660SCPAZ-HX
DIP-8DIP-8 Charge Pumps ROHSZHHXDZCharge PumpsICL7660SIPAZ-HX
DIP-8DIP-8 Charge Pumps ROHSZHHXDZCharge PumpsTC1044SCPA
DIP-8Cascade support、Adaptive switching frequency DIP-8 Charge Pumps ROHSMicrochip TechnologyCharge PumpsLT1026CN8#PBF
PDIP-8PDIP-8 Charge Pumps ROHSAnalog DevicesCharge PumpsLT1054CN8#PBF
PDIP-8PDIP-8 Charge Pumps ROHSAnalog DevicesCharge PumpsTL7660IP
PDIP-8-10V~-1.5V -40℃~+125℃ 1.5V~10V 10kHz 110uA 45Ω 98% Inverted、boost converter Not supported PDIP-8 Charge Pumps ROHSTexas InstrumentsCharge PumpsLT1054IN8#PBF
PDIP-8PDIP-8 Charge Pumps ROHSAnalog DevicesCharge Pumps
Questions
Is there a KiCad symbol and footprint for the TC7660SCPA?
Yes. The symbol is 4ms_IC:TC7660S and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TC7660SCPA?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the TC7660SCPA datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the TC7660SCPA?
JLCPCB lists it as part C182943, with 0 in stock; the sellers' links on this page open their listings.
What can replace the TC7660SCPA?
Parts like it in the library: the XD7660 by XINLUDA, the ICL7660SCPAZ-HX by ZHHXDZ, the ICL7660SIPAZ-HX by ZHHXDZ and the TC1044SCPA by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TC7660SCPA?
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.