Skip to the content
1234

TC1264-3.3VDBTR

Microchip TechnologyExtended

-40℃~+125℃@(Tj) 1 130uA 3.3V 64dB@(1kHz) 6V 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/TC1264-3.3VDBTR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-3
Pins
4
In stock
0 at JLCPCB (C622720)
Used on
3 open-source boards

Overview

The TC1264-3.3VDBTR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-223-3 package with 4 pins. -40℃~+125℃@(Tj) 1 130uA 3.3V 64dB@(1kHz) 6V 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C622720). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GNDFrom PCBKit's generic symbols

Footprint

1234
EasyEDA_Cloud:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BRFrom EasyEDA

From the datasheet

11
Supply, least
2.7 V · VIN, recommended operating, min; also requires VIN ≥ VR + VDROPOUT · p. 2
Supply, most
6 V · VIN, recommended operating, max · p. 2
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 2
Works from
-40 °C · TA, specified ambient temperature, min · p. 3
Works up to
125 °C · TA, specified ambient temperature, max; TJ must not exceed 125°C · p. 3
Junction, hottest
125 °C · TJ, operating junction temperature, max · p. 3
Takes working
80 µA · VIN quiescent supply current, output enabled, IL = 0, typical · p. 2
Gives
800 mA · continuous output current rating, min guaranteed capability · p. 2
Current limit
1.2 A · output short circuit current, VOUT = 0 V, typical · p. 2
Dropout
450 mV · VR ≥ 2.5 V, IL = 800 mA, typical · p. 2
Junction to air (3L-SOT-223)
59 K/W · junction to ambient thermal resistance, typical · p. 3

Open-source boards using it

3
  • 2 layers72 × 43 mmLag tester, the printed circuit board in 3D

    Lag tester

    citrus3000psi/Time-Sleuth

    Easy to build & cheap hdmi display lag tester

    56 parts92MIT
  • 2 layers116 × 31 mmOpengeiger, the printed circuit board in 3D

    Opengeiger

    fredriknk/eikgeiger

    IOT Geigercounter for workshop

    96 parts3MIT
  • 4 layers94 × 54 mmTransportation Monitor PCB, the printed circuit board in 3D

    Transportation Monitor PCB

    giatats/Transportation_Monitor_PCB

    Transportation monitor device for PeakSat nanosatellite

    86 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC1264-3.3VDBTR?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND and the footprint EasyEDA_Cloud:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC1264-3.3VDBTR?

SOT-223-3, with 4 pins. Its footprint is drawn on this page.

Where is the TC1264-3.3VDBTR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC1264-3.3VDBTR?

JLCPCB lists it as part C622720, with 0 in stock; the sellers' links on this page open their listings.

What can replace the TC1264-3.3VDBTR?

Parts like it in the library: the SPX1117M3-L-3-3/TR by MaxLinear, the LD1117AS33 by STMicroelectronics, the TLV1117-33IDCY by Texas Instruments and the MC33269ST-3.3 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC1264-3.3VDBTR?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.