
SeedSigner Plus smartcard pico
lightningspore/shieldsigner-dev
ShieldSigner Luckfox carrier: KiCad design, smartcard docs, reproducible build tools and HTMX knowledge site
Microchip TechnologyExtended
-40℃~+85℃ 3.6V~5.5V 3Mbps Interrupt generation、Wake-up function、Non-volatile configuration storage SPI、UART QFN-24 Interface - Specialized ROHS
The SEC1210/PV-UR2 is an interface, Specialized made by Microchip Technology in a QFN-24 package with 25 pins. -40℃~+85℃ 3.6V~5.5V 3Mbps Interrupt generation、Wake-up function、Non-volatile configuration storage SPI、UART QFN-24 Interface - Specialized ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:QFN-24_L5.0-W5.0-P0.65-TL-EP3.3-1, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C633309). 2 open-source boards in 1 repository on GitHub use it.
The library has no symbol for this part yet.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Storage Temperature TSTOR | min -55 · max 150 °C | 188 | |
| VDD5 supply voltage VDD5 | min -0.3 · max 5.5 V | 188 | |
| Voltage on USB_DP and USB_DM pins | 3.3 V ± 10% | min -0.3 · max 3.6 V | 188 |
| Voltage on RESET_N | Maximum VDD5 (Note 18-3) | min 0 V | 188 |
| Voltage on any signal pin | min -0.3 · max 5.5 V | 188 | |
| Operating Temperature TA | Ambient temperature in air; commercial | min 0 °C | 189 |
| Operating Temperature TA | Ambient temperature in air; commercial | max 70 °C | 189 |
| Operating Temperature TA | Ambient temperature in air; industrial | min -40 °C | 189 |
| Operating Temperature TA | Ambient temperature in air; industrial | max 85 °C | 189 |
| 5.0V supply voltage VDD5 | Class A Smart Card support requires 4.8V minimum | min 3.6 · max 5.5 V | 189 |
| VDD5 supply rise time tRT | Figure 18-1 | min 400 ns | 189 |
| Voltage on USB_DP and USB_DM pins | If VDD5 drops below 3.6V, maximum becomes VDD5 | min 3 · max 3.6 V | 189 |
| Voltage on RESET_N | Maximum VDD5 (Note 18-3) | min 0 V | 189 |
| Voltage on any signal pin | Other than USB_DP, USB_DM, Smart Card pins, RESET_N | min -0.3 · max 5.5 V | 189 |
| Low Output Level VOL | I/O8PUD Type Bidir Pad; IOL = -8 mA | max 0.4 V | 189 |
| 8 mA I/O sinking current IOL8 | I/O8PUD Type Bidir Pad; VOUT = 0.4V | min 8.3 · typ 12.6 · max 18.4 mA | 189 |
| 8 mA I/O sinking output impedance ROL8 | I/O8PUD Type Bidir Pad; VOUT = 0.4V | min 21.7 · typ 31.6 · max 48.3 | 189 |
| 8 mA I/O sourcing current IOH8 | I/O8PUD Type Bidir Pad; VOUT = VDD33 - 0.4V | min 8.1 · typ 11.6 · max 16 mA | 189 |
| 8 mA I/O sourcing output impedance ROH8 | I/O8PUD Type Bidir Pad; VOUT = VDD33 - 0.4V | min 25 · typ 34.6 · max 50 | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to VDD33, 27°C; high impedance | max 1 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to 5.5V, 27°C; high impedance | min 1.4 · typ 8 · max 12 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to 5.5V, 85°C; high impedance | max 20 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to 5.5V, 125°C; high impedance | max 80 uA | 189 |
| Low Input Level VIL | I/O8PUD Type Bidir Pad | min -0.3 · max 0.8 V | 189 |
| High Input Level VIH5 | I/O8PUD Type Bidir Pad | min 2 · max 5.5 V | 189 |
| Hysteresis VHYSI | I/O8PUD Type Bidir Pad | min 336 · typ 399 · max 459 mV | 189 |
| Pull-Down RDPD | I/O8PUD Type Bidir Pad; Vpad = VDD33 | min 46 · typ 65 · max 90 k | 189 |
| Pull-Down IDPD | I/O8PUD Type Bidir Pad; Vpad = VDD33 | min 33 · typ 50 · max 79 A | 189 |
| Pull-Up RDPU | I/O8PUD Type Bidir Pad; Vpad = 0V | min 53 · typ 66 · max 80 k | 189 |
| Pull-Up IDPU | I/O8PUD Type Bidir Pad; Vpad = 0V; Note 18-8 | min 38 · typ 50 · max 68 A | 189 |
| RESET_N Rise Time Trst_r | RESET_N pad | min 100 ns | 190 |
| RESET_N Fall Time Trst_f | min 100 ns | 190 | |
| RESET_N Low Input level VILRST | RESET_N low causes STOP mode entry | max 0.1 V | 190 |
| Oscillator 48/8/4 MHz accuracy F48acc | -40 < T < 125 °C; 3.6 < VDD5 < 6.8V; internal oscillator at 48 MHz with USB Dynamic Trim enabled | typ 0.1 · max 0.2 % | 190 |
| Oscillator 48/8/4 MHz accuracy F48accd | -40 < T < 125 °C; 3.6 < VDD5 < 6.8V; internal oscillator at 48 MHz without USB Dynamic Trim enabled | typ 0.82 · max 1.5 % | 190 |
| Oscillator 48/8/4 MHz accuracy F8acc | -40 < T < 125 °C; 3.6 < VDD5 < 6.8V; internal oscillator at 8 MHz | typ 0.78 · max 1.83 % | 190 |
| Oscillator 48/8/4 MHz accuracy F4acc | -40 < T < 125 °C; 3.6 < VDD5 < 6.8V; internal oscillator at 4 MHz | typ 0.78 · max 1.83 % | 190 |
| Smart Card Power Supply Voltage VSC1_VCC, VSC2_VCC | Class A mode; ISC1_VCC = 0 to 55 mA; typical VDD5 - 0.2 V; maximum min((VDD5 - 0.285), 5.25) V | min 4.6 V | 190 |
| Smart Card Power Supply Voltage VSC1_VCC, VSC2_VCC | Class B mode | min 2.76 · typ 3 · max 3.24 V | 190 |
| Smart Card Power Supply Voltage VSC1_VCC, VSC2_VCC | Class C mode | min 1.66 · typ 1.8 · max 1.94 V | 190 |
| Smart Card Power Supply current ISC1, ISC2 | Class A/B/C; per channel | max 55 mA | 190 |
| Smart Card Over Current Sense (OCS) Detection IOCS1, IOCS2 | min 110 mA | 190 | |
| Detection Time on OCS tOSCDET | max 1 us | 190 | |
| SC1_VCC/SC2_VCC Turn Off Time tSCOFF | SEC1210 A1 version; Note 18-14 | max 5 ms | 190 |
| SC1_VCC/SC2_VCC Turn Off Time tSCOFF | All Later versions | max 500 us | 190 |
| SC1_VCC/SC2_VCC Turn On Time tSCON | 1.0 F load; Note 18-14 | max 1 ms | 190 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class A; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 191 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class B; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 191 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class C; CL = 30pF; maximum 0.15 × VSCx_VCC; Note 18-15 | min 0 V | 191 |
| SC1_CLK, SC2_CLK Rise/Fall Time tR | CL = 30 pF; Rload = 33 ; Class A/B/C | min 9.9 · typ 13 · max 16.67 ns | 191 |
| SC1_CLK, SC2_CLK Rise/Fall Time tF | CL = 30 pF; Rload = 33 ; Class A/B/C | min 6.5 · typ 10 · max 16.2 ns | 191 |
| SC1_CLK, SC2_CLK Clock Accuracy | USB Dynamic Trimming is on | typ 0.1 · max 0.25 % | 191 |
| SC1_CLK, SC2_CLK Clock Accuracy | USB Dynamic trim is off; same as F48accd | typ 0.82 · max 1.5 % | 191 |
| SC1_CLK, SC2_CLK Clock Duty Cycle | Oscillator in 48 MHz mode | min 48 · max 52 % | 191 |
| SC1_CLK, SC2_CLK Frequency FSCx_CLK | Generated by dividing 48 MHz by an integer ranging from 10 to 48 | min 1 · max 4.8 MHz | 191 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class A; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 192 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class B; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 192 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min VOL | Class C; CL = 30pF; maximum 0.15 × VSCx_VCC; Note 18-15 | min 0 V | 192 |
| SC1_RST, SC2_RST Rise/Fall Time tR | CL = 30 pF; Rload = 33 ; Class A/B/C | min 32 · max 250 ns | 192 |
| SC1_RST, SC2_RST Rise/Fall Time tF | CL = 30 pF; Rload = 33 ; Class A/B/C | min 32 · max 800 ns | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min VOL | Class A; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min VOL | Class B; CL = 30pF; Note 18-15 | min 0 · max 0.4 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min VOL | Class C; CL = 30pF; maximum 0.15 × VSCx_VCC; Note 18-15 | min 0 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Rise/Fall time tR | CL = 30 pF; Rload = 33 ; Class A/B/C | min 32 · max 237 ns | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Rise/Fall time tF | CL = 30 pF; Rload = 33 ; Class A/B/C | min 32 · max 374 ns | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class A; IIL = -20uA; CL = 30pF; maximum 0.2 × VSCx_VCC | min -0.3 V | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class B; IIL = -20uA; CL = 30pF; maximum 0.2 × VSCx_VCC | min -0.3 V | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class C; IIL = -20uA; CL = 30pF | min -0.3 · max 0.5 V | 193 |
| Pull-up Resistor RPU1 | Only for SC1_IO, SC2_IO, SC1_C4, SC1_C8 | min 16.39 · typ 20 · max 24.19 k | 193 |
| Pull-up Resistor RPU2 | Only for SC1_IO, SC2_IO, SC1_C4, SC1_C8 | min 9.01 · typ 11.14 · max 13.25 k | 193 |
| Pull-down Resistor RPD | Used in GPIO mode | min 54.55 · typ 67 · max 79.78 k | 193 |
| Short Circuit Current ISC | Signals SCx_IO, SC1_C4, SC1_C8, SCx_RST, SCx_CLK | min -15 · max 15 mA | 193 |
| Input Capacitance CIN | TA = 5°C; fc = 1 MHz; all pins except USB pins and pins under test tied to AC ground | max 10 pF | 194 |
| Output Capacitance COUT | TA = 5°C; fc = 1 MHz; all GPIO pins except Smart Card and USB | max 10 pF | 194 |
| Supply Current Unconfigured USB @ VDD5= 5.0V IICCINIT | SEC1210; CCID firmware v1.4; CPU_CLK = 16 MHz; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 5.2 · max 5.5 mA | 195 |
| Supply Current Unconfigured USB @ VDD5= 5.0V IICCINIT | SEC1210; CCID firmware v1.4; CPU_CLK = 9.6 MHz; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 4.8 · max 4.9 mA | 195 |
| Supply Current Idle mode @ VDD5 = 5.0V IICCIDLE | SEC1210; CCID firmware v1.4; CPU_CLK = 16 MHz; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 5.3 · max 5.5 mA | 195 |
| Supply Current Idle mode @ VDD5 = 5.0V IICCIDLE | SEC1210; CCID firmware v1.4; CPU_CLK = 9.6 MHz; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 4.9 · max 5 mA | 195 |
| Supply Current Operating mode @ VDD5= 5.0V IICCSC1 | SEC1210; CCID firmware v1.4; CPU_CLK = 16 MHz; SC1_VCC = 5V; SC1_VCC current excluded; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 7.3 · max 7.5 mA | 195 |
| Supply Current Operating mode @ VDD5= 5.0V IICCSC1 | SEC1210; CCID firmware v1.4; CPU_CLK = 9.6 MHz; SC1_VCC = 5V; SC1_VCC current excluded; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 6.8 · max 6.9 mA | 195 |
| Supply Current Operating mode @ VDD5= 5.0V IICCSC2 | SEC1210; CCID firmware v1.4; CPU_CLK = 16 MHz; SC1_VCC and SC2_VCC = 5V; SC1_VCC and SC2_VCC current excluded; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 8.8 · max 8.82 mA | 195 |
| Supply Current Operating mode @ VDD5= 5.0V IICCSC2 | SEC1210; CCID firmware v1.4; CPU_CLK = 9.6 MHz; SC1_VCC and SC2_VCC = 5V; SC1_VCC and SC2_VCC current excluded; TA = 0°C - 70°C; SPI1, UART, SPI2 off | typ 8.3 · max 8.5 mA | 195 |
| Supply Current USB Suspend @ VDD5 = 5.0V ICCSH | SEC1210; CCID firmware v1.4; SC1_PRSNT_N not grounded; includes USB_DP pull-up current; TA = 0°C - 70°C | typ 392 uA | 195 |
| Supply Current USB Suspend @ VDD5 = 5.0V ICCSH1 | SEC1210; CCID firmware v1.4; Smart Card1 present, SC1_PRSNT_N = 0V; includes USB_DP pull-up current; TA = 0°C - 70°C | typ 446 uA | 195 |
| Supply Current USB Suspend @ VDD5 = 5.0V ICCSH2 | SEC1210; CCID firmware v1.4; Smart Card1 and Smart Card2 present, SC1_PRSNT_N and SC2_PRSNT_N = 0V; includes USB_DP pull-up current; TA = 0°C - 70°C | typ 502 uA | 195 |
| Supply Current STOP Mode ISTOP | SEC1210; VDDD5 = 5.0V as printed; TA = 0°C - 70°C | typ 0.11 · max 1 uA | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 0 meters/sec; single stated value | typ 41 OC/W | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 1 meters/sec; single stated value | typ 36 OC/W | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 2.5 meters/sec; single stated value | typ 32 OC/W | 195 |
| Thermal Resistance Junction to Top of Case JC | SEC1210; 24SQFN; single stated value | typ 4.5 OC/W | 195 |
| Thermal Resistance Junction to Board JB | SEC1210; 24SQFN; single stated value | typ 23 OC/W | 195 |
| Thermal Resistance Junction to Bottom of Case JT | SEC1210; 24SQFN; velocity 0 meters/sec; single stated value | typ 0.5 OC/W | 195 |
| Thermal Parameter Junction to Board JB | SEC1210; 24SQFN; velocity 0 meters/sec; single stated value | typ 22 OC/W | 195 |
| Operating Temperature TA | Commercial; ambient temperature in air | min 0 °C | 189 |
| Operating Temperature TA | Commercial; ambient temperature in air | max 70 °C | 189 |
| Operating Temperature TA | Industrial; ambient temperature in air | min -40 °C | 189 |
| Operating Temperature TA | Industrial; ambient temperature in air | max 85 °C | 189 |
| 5.0V supply voltage VDD5 | Class A Smart Card requires 4.8 V minimum | min 3.6 · max 5.5 V | 189 |
| Voltage on USB_DP and USB_DM pins | If VDD5 drops below 3.6 V, maximum becomes VDD5 | min 3 · max 3.6 V | 189 |
| Low Output Level VOL | I/O8PUD Type Bidir Pad; IOL = -8 mA; TA = 0°C - 70°C, VDD5 = +3.6V to +5.5V | max 0.4 V | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN= 0 to VDD33,27°C | max 1 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to 5.5V, 27°C | min 1.4 · typ 8 · max 12 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN = 0 to 5.5V, 85°C | max 20 uA | 189 |
| Output Leakage IIH5 | I/O8PUD Type Bidir Pad; VIN=0 to 5.5V,125°C; Note 18-3 | max 80 uA | 189 |
| Pull-Up RDPU | I/O8PUD Type Bidir Pad; Vpad = 0V; Note 18-8 | min 53 · typ 66 · max 80 k | 189 |
| RESET_N Rise Time Trst_r | RESET_N pad; Note 18-3 | min 100 ns | 190 |
| RESET_N Fall Time Trst_f | RESET_N pad | min 100 ns | 190 |
| Smart Card Power Supply Voltage VSC1_VCC, VSC2_VCC | Class A mode; ISC1_VCC = 0 to 55 mA; typical VDD5-0.2; maximum min((VDD5-0.285),5.25); Note 18-13 | min 4.6 V | 190 |
| Smart Card Power Supply current ISC1, ISC2 | Class A/B/C | max 55 mA | 190 |
| SC1_VCC/SC2_VCC Turn On Time tSCON | 1.0 uF load; Note 18-14 | max 1 ms | 190 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class A; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 191 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class B; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 191 |
| SC1_CLK, SC2_CLK Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class C; maximum 0.15 VSCx_VCC; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 V | 191 |
| SC1_CLK, SC2_CLK Rise/Fall Time tR | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 9.9 · typ 13 · max 16.67 ns | 191 |
| SC1_CLK, SC2_CLK Rise/Fall Time tF | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 6.5 · typ 10 · max 16.2 ns | 191 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class A; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 192 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class B; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 192 |
| SC1_RST, SC2_RST Low Output Level at VSC1_VCC/VSC2_VCC=min @ CL=30pF VOL | Class C; maximum 0.15 VSCx_VCC; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 V | 192 |
| SC1_RST, SC2_RST Rise/Fall Time tR | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 32 · max 250 ns | 192 |
| SC1_RST, SC2_RST Rise/Fall Time tF | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 32 · max 800 ns | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min @ CL=30pF VOL | Class A; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min @ CL=30pF VOL | Class B; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 · max 0.4 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Output Level at VSC1_VCC/VSC1_VCC=min @ CL=30pF VOL | Class C; maximum 0.15 VSCx_VCC; Note 18-15; A1 version: 100uA < IOL < 0; later versions: IOLmax = -1 mA @125 °C | min 0 V | 192 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Rise/Fall time tR | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 32 · max 237 ns | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Rise/Fall time tF | CL = 30 pF, Rload=33 Ω, Class A/B/C | min 32 · max 374 ns | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class A; IIL = - 20uA; CL=30pF; maximum 0.2 VSCx_VCC; Note 18-17 | min -0.3 V | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class B; IIL = - 20uA; CL=30pF; maximum 0.2 VSCx_VCC; Note 18-17 | min -0.3 V | 193 |
| SC1_IO/ SC2_IO, SC1_C4, SC1_C8 Low Input Level VIL | Class C; IIL = - 20uA; CL=30pF; Note 18-17 | min -0.3 · max 0.5 V | 193 |
| Supply Current Unconfigured USB IICCINIT | SEC1210; VDD5=5.0V; CPU_CLK=16 MHz; TA=0°C-70°C; CCID firmware v1.4 | typ 5.2 · max 5.5 mA | 195 |
| Supply Current Unconfigured USB IICCINIT | SEC1210; VDD5=5.0V; CPU_CLK=9.6 MHz; TA=0°C-70°C; CCID firmware v1.4 | typ 4.8 · max 4.9 mA | 195 |
| Supply Current Idle mode IICCIDLE | SEC1210; VDD5=5.0V; CPU_CLK=16 MHz; TA=0°C-70°C; CCID firmware v1.4 | typ 5.3 · max 5.5 mA | 195 |
| Supply Current Idle mode IICCIDLE | SEC1210; VDD5=5.0V; CPU_CLK=9.6 MHz; TA=0°C-70°C; CCID firmware v1.4 | typ 4.9 · max 5 mA | 195 |
| Supply Current Operating mode IICCSC1 | SEC1210; VDD5=5.0V; CPU_CLK=16 MHz; SC1_VCC=5V, SC1_VCC current excluded; TA=0°C-70°C; CCID firmware v1.4 | typ 7.3 · max 7.5 mA | 195 |
| Supply Current Operating mode IICCSC1 | SEC1210; VDD5=5.0V; CPU_CLK=9.6 MHz; SC1_VCC=5V, SC1_VCC current excluded; TA=0°C-70°C; CCID firmware v1.4 | typ 6.8 · max 6.9 mA | 195 |
| Supply Current Operating mode IICCSC2 | SEC1210; VDD5=5.0V; CPU_CLK=16 MHz; SC1_VCC, SC2_VCC=5V, SC1_VCC and SC2_VCC current excluded; TA=0°C-70°C; CCID firmware v1.4 | typ 8.8 · max 8.82 mA | 195 |
| Supply Current Operating mode IICCSC2 | SEC1210; VDD5=5.0V; CPU_CLK=9.6 MHz; SC1_VCC, SC2_VCC=5V, SC1_VCC and SC2_VCC current excluded; TA=0°C-70°C; CCID firmware v1.4 | typ 8.3 · max 8.5 mA | 195 |
| Supply Current USB Suspend ICCSH | SEC1210; VDD5=5.0V; SC1_PRSNT_N not grounded; Note 18-7; TA=0°C-70°C; CCID firmware v1.4 | typ 392 uA | 195 |
| Supply Current USB Suspend ICCSH1 | SEC1210; VDD5=5.0V; Smart Card1 present, SC1_PRSNT_N=0V; Note 18-7; TA=0°C-70°C; CCID firmware v1.4 | typ 446 uA | 195 |
| Supply Current USB Suspend ICCSH2 | SEC1210; VDD5=5.0V; both Smart Cards present, SC1_PRSNT_N and SC2_PRSNT_N=0V; Note 18-7; TA=0°C-70°C; CCID firmware v1.4 | typ 502 uA | 195 |
| Supply Current STOP Mode ISTOP | SEC1210; VDDD5=5.0V; TA=0°C-70°C; CCID firmware v1.4 | typ 0.11 · max 1 uA | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 0 METERS/SEC | typ 41 OC/W | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 1 METERS/SEC | typ 36 OC/W | 195 |
| Thermal Resistance Junction to Ambient JA | SEC1210; 24SQFN; velocity 2.5 METERS/SEC | typ 32 OC/W | 195 |
| Thermal Resistance Junction to Top of Case JC | SEC1210; 24SQFN | typ 4.5 OC/W | 195 |
| Thermal Resistance Junction to Board JB | SEC1210; 24SQFN | typ 23 OC/W | 195 |
| Thermal Resistance Junction to Bottom of Case JT | SEC1210; 24SQFN; velocity 0 METERS/SEC | typ 0.5 OC/W | 195 |
| Thermal Parameter Junction to Board JB | SEC1210; 24SQFN; velocity 0 METERS/SEC | typ 22 OC/W | 195 |

lightningspore/shieldsigner-dev
ShieldSigner Luckfox carrier: KiCad design, smartcard docs, reproducible build tools and HTMX knowledge site

lightningspore/shieldsigner-dev
ShieldSigner Luckfox carrier: KiCad design, smartcard docs, reproducible build tools and HTMX knowledge site
Yes. the footprint EasyEDA_Cloud:QFN-24_L5.0-W5.0-P0.65-TL-EP3.3-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-24, with 25 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C633309, with 0 in stock; the sellers' links on this page open their listings.
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.