
PIC DEV BOARD
anshukumar146/GitHub
A compact, self-contained development board for the 8051 microcontroller family (AT89x51xxP), designed in KiCad — built to run 8051 firmware on the bench with nothing more than a barrel-jack power supply and a…
Microchip TechnologyExtended
-40℃~+85℃ 10bit 256Byte 36 4.2V~5.5V 40MHz 768Byte 8 Bit 8KB Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
The PIC18F4331-I/PT is a microcontroller made by Microchip Technology in a TQFP-44(10x10) package with 44 pins. -40℃~+85℃ 10bit 256Byte 36 4.2V~5.5V 40MHz 768Byte 8 Bit 8KB Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PIC18F4331-I_PT, from EasyEDA) and its footprint (Package_QFP:TQFP-44_10x10mm_P0.8mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C220245). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | RC7/RX/DT/SDO | Unspecified |
| 2 | RD4/FLTA#(2) | Unspecified |
| 3 | RD5/PWM4#(3) | Unspecified |
| 4 | RD6/PWM6 | Unspecified |
| 5 | RD7/PWM7 | Unspecified |
| 6 | VSS | Unspecified |
| 7 | VDD | Unspecified |
| 8 | RB0/PWM0 | Unspecified |
| 9 | RB1/PWM1 | Unspecified |
| 10 | RB2/PWM2 | Unspecified |
| 11 | RB3/PWM3 | Unspecified |
| 12 | NC | Unspecified |
| 13 | NC | Unspecified |
| 14 | RB4/KBI0/PWM5 | Unspecified |
| 15 | RB5/KBI1/PWM4/PGM | Unspecified |
| 16 | RB6/KBI2/PGC | Unspecified |
| 17 | RB7/KBI3/PGD | Unspecified |
| 18 | MCLR#/VPP/RE3 | Unspecified |
| 19 | RA0/AN0 | Unspecified |
| 20 | RA1/AN1 | Unspecified |
| 21 | RA2/AN2/VREF-/CAP1/INDX | Unspecified |
| 22 | RA3/AN3/VREF+/CAP2/QEA | Unspecified |
| 23 | RA4/AN4/CAP3/QEB | Unspecified |
| 24 | RA5/AN5/LVDIN | Unspecified |
| 25 | RE0/AN6 | Unspecified |
| 26 | RE1/AN7 | Unspecified |
| 27 | RE2/AN8 | Unspecified |
| 28 | AVDD | Unspecified |
| 29 | AVSS | Unspecified |
| 30 | OSC1/CLKI/RA7 | Unspecified |
| 31 | OSC2/CLKO/RA6 | Unspecified |
| 32 | RC0/T1OSO/T1CKI | Unspecified |
| 33 | NC | Unspecified |
| 34 | NC | Unspecified |
| 35 | RC1/T1OSI/CCP2/FLTA# | Unspecified |
| 36 | RC2/CCP1/FLTB# | Unspecified |
| 37 | RC3/T0CKI(1)/T5CKI(1)/INT0 | Unspecified |
| 38 | RD0/T0CKI/T5CKI | Unspecified |
| 39 | RD1/SDO | Unspecified |
| 40 | RD2/SDI/SDA | Unspecified |
| 41 | RD3/SCK/SCL | Unspecified |
| 42 | RC4/INT1/SDI(1)/SDA(1) | Unspecified |
| 43 | RC5/INT2/SCK(1)/SCL(1) | Unspecified |
| 44 | RC6/TX/CK/SS# | Unspecified |

anshukumar146/GitHub
A compact, self-contained development board for the 8051 microcontroller family (AT89x51xxP), designed in KiCad — built to run 8051 firmware on the bench with nothing more than a barrel-jack power supply and a…

webertom6/pi-protobot
Mobile robot capable of autonomously navigating while avoiding obstacles and dead ends
Yes. The symbol is EasyEDA_Cloud:PIC18F4331-I_PT and the footprint Package_QFP:TQFP-44_10x10mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TQFP-44(10x10), with 44 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C220245, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STC89C52RC-40I by STC, the STC8A8K64D4-45I-LQFP44 by STC Micro, the FM33FR024 by FUDAN MICRO and the STC89C58RD+40I-LQFP44 by STC Micro. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.