
MIC5356-SGYMME
Microchip TechnologyExtended
MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
- Part id
- microchip/MIC5356-SGYMME
- Category
- Pre Ordered MCUs
- Package
- MSOP-8-EP
- Pins
- 9
- In stock
- 0 at JLCPCB (C636626)
- Used on
- 2 open-source boards
Overview
The MIC5356-SGYMME is a pre Ordered MCU made by Microchip Technology in a MSOP-8-EP package with 9 pins. MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Regulator_Linear:MIC5356-SGYMME, from KiCad's library) and its footprint (Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C636626). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
11- Supply, least
- 2.5 V · VIN, recommended operating, min · p. 3
- Supply, most
- 5.5 V · VIN, recommended operating, max · p. 3
- Supply, absolute maximum
- 6 V · VIN, absolute maximum · p. 3
- Junction, hottest
- 125 °C · junction temperature, max · p. 9
- Takes working
- 70 µA · ground current, both outputs enabled, no load, typical · p. 3
- Takes asleep
- 50 nA · shutdown, both enables at or below 0.2 V, typical · p. 3
- Gives
- 500 mA · continuous output per channel, rated max · p. 9
- Current limit
- 750 mA · per channel, VOUT = 0 V, typical · p. 3
- Dropout
- 40 mV · IOUT = 50 mA, typical · p. 3
- Dropout
- 350 mV · IOUT = 500 mA, typical · p. 3
- Junction to air (8-Pin ePad MSOP)
- 64.4 K/W · junction to ambient · p. 3
Open-source boards using it
2- 2 layers44.5 × 19.7 mm

- 2 layers57.9 × 67.9 mm

Parts like it
3MIC5355-JGYMME
MSOP-8-EPMSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyPre-Ordered MCUsMIC5355-SGYMME-TR
MSOP-8-EPMSOP-8-EP Pre-ordered MCUs ROHSMicrochip TechnologyPre-Ordered MCUsMIC5356-SGYMME-TR
MSOP-8-EPOver Current Protection、Thermal shutdown、Enable control、Output discharge MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyPre-Ordered MCUs
Questions
Is there a KiCad symbol and footprint for the MIC5356-SGYMME?
Yes. The symbol is Regulator_Linear:MIC5356-SGYMME and the footprint Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MIC5356-SGYMME?
MSOP-8-EP, with 9 pins. Its footprint is drawn on this page.
Where is the MIC5356-SGYMME datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MIC5356-SGYMME?
JLCPCB lists it as part C636626, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MIC5356-SGYMME?
Parts like it in the library: the MIC5355-JGYMME by Microchip Technology, the MIC5355-SGYMME-TR by Microchip Technology and the MIC5356-SGYMME-TR by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MIC5356-SGYMME?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.