MCP73832-2ACI/OT

Microchip TechnologyExtended

-40℃~+85℃ 1 1uA 3.75V~6V 4.2V 550mA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Under-voltage lockout、Reverse current blocking Lithium Battery Not supported SOT-23-5 Battery Management ROHS

Datasheet JLCPCB LCSC

Part id: microchip/MCP73832-2ACI/OT
Category: Battery Management
Package: SOT-23-5
Pins: 5
In stock: 10,559 at JLCPCB (C38066)
Used on: 1 open-source board

Overview

The MCP73832-2ACI/OT is a battery Management made by Microchip Technology in a SOT-23-5 package with 5 pins. -40℃~+85℃ 1 1uA 3.75V~6V 4.2V 550mA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Under-voltage lockout、Reverse current blocking Lithium Battery Not supported SOT-23-5 Battery Management ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-Battery-Chargers:MCP73832T-2ACI_OT, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 10,559 are in stock at JLCPCB (part C38066). 1 open-source board in 1 repository on GitHub use it.

Symbol

dk_PMIC-Battery-Chargers:MCP73832T-2ACI_OTFrom Digikey

Footprint

Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

Supply, least: 3.75 V · VDD, DC supply voltage min · p. 3
Supply, most: 6 V · VDD, DC supply voltage max · p. 3
Supply, absolute maximum: 7 V · VDD, absolute maximum · p. 3
Works from: -40 °C · TA, specified ambient temperature min · p. 5
Works up to: 85 °C · TA, specified ambient temperature max · p. 5
Junction, hottest: 125 °C · TJ, operating junction temperature max · p. 5
Takes working: 510 µA · VDD supply current, charging, typical · p. 3
Takes at most: 1.5 mA · VDD supply current, charging, max · p. 3
Takes asleep: 25 µA · VDD supply current, PROG floating, typical · p. 3
Takes asleep: 1 µA · VDD supply current, VDD < VBAT - 50 mV, typical · p. 3
Takes asleep: 100 nA · VDD supply current, VDD < VSTOP, typical · p. 3
Gives: 500 mA · programmable charge current max · p. 1
Output: 4.2 V · VBAT regulated output, MCP7383X-2, typical · p. 3
A pin gives at most: 25 mA · STAT sink current max · p. 4
Junction to air (5-Lead, SOT-23): 230 K/W · junction to ambient, 4-layer JC51-7 board, natural convection, typical · p. 5

What it is and has

Charge management: Linear · p. 1
Pass transistor: Integrated · p. 1
Current sense: Integrated · p. 1
Protection: Reverse discharge protection · p. 1
Voltage regulation accuracy: + 0.75% · p. 1
Programmable charge current: 15 mA to 500 mA · p. 1
Charge status output: Open-drain · p. 1
Automatic power-down: Available · p. 1
Thermal regulation: Available · p. 1
Package: 5-Lead, SOT-23 · p. 1

Around it

cap minimum 4.7 µF: between VDD and VSS; Input supply bypass capacitor. · p. 11
cap minimum 4.7 µF: between VBAT and VSS; Ensures loop stability when the battery is disconnected. · p. 11

Specifications

Parameter	Conditions	As printed	Page
VDD VDD		max 7 V	3
All Inputs and Outputs w.r.t. VSS	Maximum is (VDD+0.3)V	min -0.3 V	3
Storage temperature		min -65 · max 150 °C	3
ESD protection on all pins: Human Body Model	1.5 k in Series with 100 pF	min 4 kV	3
ESD protection on all pins: Machine Model	200 pF, No Series Resistance	max 400 V	3
Supply Voltage VDD		min 3.75 · max 6 V	3
Supply Current ISS	Charging	typ 510 · max 1500 uA	3
Supply Current ISS	Charge Complete, No Battery	typ 53 · max 200 uA	3
Supply Current ISS	PROG Floating	typ 25 · max 50 uA	3
Supply Current ISS	VDD < (VBAT - 50 mV)	typ 1 · max 5 uA	3
Supply Current ISS	VDD < VSTOP	typ 0.1 · max 2 uA	3
UVLO Start Threshold VSTART	VDD Low-to-High	min 3.3 · typ 3.45 · max 3.6 V	3
UVLO Stop Threshold VSTOP	VDD High-to-Low	min 3.2 · typ 3.38 · max 3.5 V	3
UVLO Hysteresis VHYS		typ 70 mV	3
Regulated Output Voltage VREG	MCP7383X-2; VDD = [VREG(typical)+1V]; IOUT = 10 mA; TA = -5°C to +55°C	min 4.168 · typ 4.2 · max 4.232 V	3
Line Regulation VBAT/VBAT)/VDD\|	VDD = [VREG(typical)+1V] to 6V, IOUT = 10 mA	typ 0.09 · max 0.3 %/V	3
Load Regulation VBAT/VBAT\|	IOUT = 10 mA to 50 mA; VDD = [VREG(typical)+1V]	typ 0.05 · max 0.3 %	3
Supply Ripple Attenuation PSRR	IOUT=10 mA, 10Hz to 1 kHz	typ 52 dB	3
Supply Ripple Attenuation PSRR	IOUT=10 mA, 10Hz to 10 kHz	typ 47 dB	3
Supply Ripple Attenuation PSRR	IOUT=10 mA, 10Hz to 1 MHz	typ 22 dB	3
Fast Charge Current Regulation IREG	PROG = 10 k	min 90 · typ 100 · max 110 mA	3
Fast Charge Current Regulation IREG	PROG = 2.0 k; Note 1: Not production tested. Ensured by design.	min 450 · typ 505 · max 550 mA	3
Fast Charge Current Regulation IREG	PROG = 67 k; TA = -5°C to +55°C	min 12.5 · typ 14.5 · max 16.5 mA	3
Precondition Hysteresis VPHYS	VBAT High-to-Low	typ 110 mV	4
ON-Resistance RDSON	VDD = 3.75V, TJ = 105°C	typ 350 m	4
Battery Detection Current IBAT_DET	VBAT Source Current	typ 6 uA	4
No-Battery-Present Impedance ZNO_BAT	VBAT Impedance ≥ ZNO_BAT for No Battery condition; Note 1: Not production tested. Ensured by design.	min 2 M	4
Output Reverse Leakage Current IDISCHARGE	PROG Floating	typ 0.15 · max 2 uA	4
Output Reverse Leakage Current IDISCHARGE	VDD Floating	typ 0.25 · max 2 uA	4
Output Reverse Leakage Current IDISCHARGE	VDD < VSTOP	typ 0.15 · max 2 uA	4
Output Reverse Leakage Current IDISCHARGE	Charge Complete	typ -5.5 · max -15 uA	4
Sink Current ISINK	STAT	max 25 mA	4
Low Output Voltage VOL	ISINK = 4 mA	typ 0.4 · max 1 V	4
Input Leakage Current ILK	High-Impedance	typ 0.03 · max 1 uA	4
Charge Impedance Range RPROG	PROG Input	min 2 · max 67 k	4
Minimum Shutdown Impedance RPROG	PROG Input	min 70 · max 200 k	4
Die Temperature TSD	Thermal Shutdown	typ 150 C	5
Die Temperature Hysteresis TSDHYS	Thermal Shutdown	typ 10 C	5
UVLO Start Delay tSTART	VDD Low-to-High	max 5 ms	5
Transition Time Out of Preconditioning tDELAY	VBAT < VPTH to VBAT > VPTH	max 1 ms	5
Current Rise Time Out of Preconditioning tRISE	IOUT Rising to 90% of IREG	max 1 ms	5
Termination Comparator Filter tTERM	Average IOUT Falling	min 0.4 · typ 1.3 · max 3.2 ms	5
Charge Comparator Filter tCHARGE	Average VBAT	min 0.4 · typ 1.3 · max 3.2 ms	5
Status Output turn-off tOFF	ISINK = 1 mA to 0 mA	max 200 us	5
Status Output turn-on tON	ISINK = 0 mA to 1 mA	max 200 us	5
Specified Temperature Range TA		min -40 · max 85 °C	5
Operating Temperature Range TJ		min -40 · max 125 °C	5
Storage Temperature Range TA		min -65 · max 150 °C	5
5-Lead, SOT-23 JA	4-Layer JC51-7 Standard Board, Natural Convection (Note 2)	typ 230 °C/W	5

Pins, by the datasheet

1 STAT: Charge status output; connect to an LED or use a pull-up resistor to interface to a host microcontroller. · p. 11
2 VSS: Battery management 0V reference; connect to the negative terminal of the battery and input supply. · p. 11
3 VBAT: Battery charge control output; connect to the battery positive terminal and bypass to VSS with at least 4.7 uF. · p. 11
4 VDD: Battery management input supply; bypass to VSS with at least 4.7 uF. · p. 11
5 PROG: Current regulation set and charge control enable; connect a resistor to VSS to set current or allow to float to disable charging. · p. 11

Parameters

Battery Temperature Detection: Not supported
Charge Current - Max: 500mA
Charging Saturation Voltage: 4.2V
Current - Supply: 510uA
Current - Supply(Max): 1.5mA
Features: Reverse current blocking
Junction Temperature(Max): 125℃
Number of Cells: 1
Operating Temperature: -40℃~+85℃
Output Current per Pin(Max): 25mA
Standby Current: 25uA
Supply Current (Iq): 1uA
The Chip Type: Charging IC
Thermal Resistance(Junction to Ambient): 230℃/W
Type of Battery: Lithium Battery
Voltage - Supply: 3.75V~6V
Voltage - Supply(Absolute Max): 7V

Order codes

MCP73832T-2ACI/OTLCSC C38066

Pinout

The pins of the MCP73832-2ACI/OT
Pin	Name	Type
1	STAT	Output
2	VSS	Power in
3	VBAT	Power out
4	VDD	Power in
5	PROG	Input

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/microchip/MCP73832-2ACI/OT" title="MCP73832-2ACI/OT in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

4 layers19.2 × 25.9 mm
Tracker Band V1
myles-parfeniuk/SilhouetteSync
Open source motion tracker band intended for athletics analytics.
79 partsGPL-3.0

Parts like it

Questions

Is there a KiCad symbol and footprint for the MCP73832-2ACI/OT?

Yes. The symbol is dk_PMIC-Battery-Chargers:MCP73832T-2ACI_OT and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP73832-2ACI/OT?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the MCP73832-2ACI/OT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP73832-2ACI/OT?

JLCPCB lists it as part C38066, with 10,559 in stock; the sellers' links on this page open their listings.

What can replace the MCP73832-2ACI/OT?

Parts like it in the library: the TP4054 by JSMSEMI, the TP4054-42-SOT25R by TOPPOWER, the TP4054 by UMW and the LP4054HB5F by LOWPOWER. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP73832-2ACI/OT?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.

MCP73832-2ACI/OT

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Open-source boards using it

Tracker Band V1

Parts like it

TP4054

TP4054-42-SOT25R

TP4054

LP4054HB5F

TP4055

TP4054

FM4057S52

LTH7

Questions

Is there a KiCad symbol and footprint for the MCP73832-2ACI/OT?

What package is the MCP73832-2ACI/OT?

Where is the MCP73832-2ACI/OT datasheet?

Where can I order the MCP73832-2ACI/OT?

What can replace the MCP73832-2ACI/OT?

Which open-source boards use the MCP73832-2ACI/OT?