Skip to the content
12345678

MCP6042-I/MS

Microchip TechnologyExtended

-40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output MSOP-8 Operational Amplifier ROHS

Part id
microchip/MCP6042-I/MS
Category
Operational Amplifier
Package
MSOP-8
Pins
8
In stock
359 at JLCPCB (C627438)

Overview

The MCP6042-I/MS is an operational Amplifier made by Microchip Technology in a MSOP-8 package with 8 pins. -40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output MSOP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TL082BCDR, from EasyEDA) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 359 are in stock at JLCPCB (part C627438).

Symbol

8VDD1VOUTA4VSS3VINA+2VINA-
EasyEDA_Cloud:TL082BCDRFrom EasyEDA

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

From the datasheet

9
Supply, least
1.4 V · VDD, recommended operating min · p. 2
Supply, most
6 V · VDD, recommended operating max · p. 2
Supply, absolute maximum
7 V · VDD – VSS, absolute max · p. 2
Works from
-40 °C · Operating ambient min · p. 4
Works up to
125 °C · Operating ambient max; reduced performance above +85°C for Industrial parts · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 2
Takes working
1.2 µA · sum of two amplifiers' typical quiescent currents, IO = 0 · p. 2
A pin gives at most
30 mA · Output pin source or sink absolute max · p. 2
Junction to air (8L-MSOP)
206 K/W · Junction to ambient typical · p. 4

What it is and has

4
Input/output
Rail-to-rail · p. 1
Gain bandwidth product
14 kHz typical · p. 1
Stability
Unity gain stable · p. 1
Amplifiers
Dual · p. 1

Around it

2
cap 0.01 µF to 0.1 µF
between VDD and VSS; Local supply bypass capacitor within 2 mm. · p. 15
cap 1 µF or larger
between VDD and VSS; Optional bulk capacitor within 100 mm; can be shared with nearby analog parts. · p. 15

Specifications

32
ParameterConditionsAs printedPage
VDD – VSSmax 7 V2
Current at Input Pins±2 mAmin -2 · max 2 mA2
Current at Output and Supply Pins±30 mAmin -30 · max 30 mA2
Storage Temperaturemin -65 · max 150 °C2
Junction Temperaturemax 150 °C2
ESD protection on all pins (HBM; MM)HBMmin 4 kV2
ESD protection on all pins (HBM; MM)MMmin 200 V2
Input Offset Voltage VOSVCM = VSSmin -3 · max 3 mV2
Drift with Temperature VOS/TAVCM = VSS, TA= -40°C to +85°C; typical ±2typ 2 uV/°C2
Drift with Temperature VOS/TAVCM = VSS, TA= +85°C to +125°C; typical ±15typ 15 uV/°C2
Power Supply Rejection PSRRVCM = VSSmin 70 · typ 85 dB2
Input Bias Current IBTA = 25°Ctyp 1 pA2
Industrial Temperature IBTA = +85°typ 20 · max 100 pA2
Input Offset Current IOStyp 1 pA2
Common-mode Rejection Ratio CMRRVDD = 5V, VCM = -0.3V to 5.3Vmin 62 · typ 80 dB2
Common-mode Rejection Ratio CMRRVDD = 5V, VCM = 2.5V to 5.3Vmin 60 · typ 75 dB2
Common-mode Rejection Ratio CMRRVDD = 5V, VCM = -0.3V to 2.5Vmin 60 · typ 80 dB2
DC Open-Loop Gain (large signal) AOLRL = 50 k to VL, VOUT = 0.1V to VDD0.1Vmin 95 · typ 115 dB2
Output Short Circuit Current ISCVDD = 1.4Vtyp 2 mA2
Output Short Circuit Current ISCVDD = 5.5Vtyp 20 mA2
Supply Voltage VDDNote 1min 1.4 · max 6 V2
Quiescent Current per Amplifier IQIO = 0min 0.3 · typ 0.6 · max 1 uA2
Gain Bandwidth Product GBWPtyp 14 kHz3
Slew Rate SRtyp 3 V/ms3
Phase Margin PMG = +1 V/Vtyp 65 °3
Input Voltage Noise Enif = 0.1 Hz to 10 Hztyp 5 uVP-P3
Input Voltage Noise Density enif = 1 kHztyp 170 nV/Hz3
Input Current Noise Density inif = 1 kHztyp 0.6 fA/Hz3
Specified Temperature Range TAIndustrial Temperature partsmin -40 · max 85 °C4
Operating Temperature Range TANote 1; Industrial Temperature parts operate above +85°C with reduced performancemin -40 · max 125 °C4
Storage Temperature Range TAmin -65 · max 150 °C4
Thermal Resistance, 8L-MSOP JA8L-MSOPtyp 206 °C/W4

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6042-I/MS?

Yes. The symbol is EasyEDA_Cloud:TL082BCDR and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6042-I/MS?

MSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6042-I/MS datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6042-I/MS?

JLCPCB lists it as part C627438, with 359 in stock; the sellers' links on this page open their listings.

What can replace the MCP6042-I/MS?

Parts like it in the library: the LMV358B-VR by 3PEAK, the LMV358IDGKRG by HANSCHIP semiconductor, the LM358ST by STMicroelectronics and the COS722MR by COSINE. Check their datasheets: a part that fits the footprint may still differ in its ratings.