Skip to the content
PCBKitNew board
MCP6004-I/SL, in 3D

MCP6004-I/SL

Microchip Technology

-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCmicrochip/MCP6004-I/SL
Category
Operational Amplifier
Package
SOIC-14
Pins
14

Overview

The MCP6004-I/SL is an operational Amplifier made by Microchip Technology in a SOIC-14 package with 14 pins. -40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:MCP6004, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 8,549 are in stock at JLCPCB (part C7378). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:MCP6004From KiCad's library

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

From the datasheet

9
Supply, least
1.8 V · VDD, recommended operating min relative to VSS · p. 3
Supply, most
6 V · VDD, recommended operating max relative to VSS · p. 3
Supply, absolute maximum
7 V · VDD – VSS, absolute max · p. 3
Works from
-40 °C · industrial ambient min · p. 4
Works up to
85 °C · industrial ambient max · p. 4
Junction, hottest
150 °C · junction absolute max · p. 3
Takes working
400 µA · sum of four amplifiers, typical quiescent current, IO = 0, VDD = 5.5V · p. 3
A pin gives at most
30 mA · output and supply pins, absolute max magnitude · p. 3
Junction to air (14-Lead SOIC)
120 K/W · junction to ambient, typical · p. 4

What it is and has

3
Gain Bandwidth Product
1 MHz typical · p. 1
Input/output
Rail-to-rail · p. 1
Package options
14-Lead PDIP, SOIC, TSSOP · p. 1

Around it

2
cap 0.01 µF to 0.1 µF
between VDD and VSS; Local supply bypass capacitor within 2 mm for good high-frequency performance. · p. 14
cap 1 µF or larger
between VDD and VSS; Bulk supply capacitor within 100 mm; may be shared with nearby analog parts. · p. 14

Specifications

29
ParameterConditionsAs printedPage
VDD – VSSmax 7 V3
Current at Analog Input Pins (VIN+, VIN-)±2 mAmin -2 · max 2 mA3
Current at Output and Supply Pins±30 mAmin -30 · max 30 mA3
Storage Temperaturemin -65 · max 150 °C3
Maximum Junction Temperature (TJ) TJmax 150 °C3
ESD Protection On All Pins (HBM; MM)HBMmin 4 kV3
ESD Protection On All Pins (HBM; MM)MMmin 200 V3
Input Offset Voltage VOSVCM = VSS (Note 1)min -4.5 · max 4.5 mV3
Input Offset Drift with Temperature VOS/TATA= -40°C to +125°C, VCM = VSS; typical ±2.0typ 2 uV/°C3
Power Supply Rejection Ratio PSRRVCM = VSStyp 86 dB3
Input Bias Current: IBTA = +25°C; typical ±1.0typ 1 pA3
Industrial Temperature IBTA = +85°Ctyp 19 pA3
Input Offset Current IOStypical ±1.0typ 1 pA3
Common-Mode Rejection Ratio CMRRVCM = -0.3V to 5.3V, VDD = 5Vmin 60 · typ 76 dB3
DC Open-Loop Gain (Large Signal) AOLVOUT = 0.3V to VDD – 0.3V, VCM = VSSmin 88 · typ 112 dB3
Output Short-Circuit Current ISCVDD = 1.8V; typical ±6typ 6 mA3
Output Short-Circuit Current ISCVDD = 5.5V; typical ±23typ 23 mA3
Supply Voltage VDDNote 2min 1.8 · max 6 V3
Quiescent Current per Amplifier IQIO = 0, VDD = 5.5V, VCM = 5Vmin 50 · typ 100 · max 170 uA3
Gain Bandwidth Product GBWPtyp 1 MHz4
Phase Margin PMG = +1 V/Vtyp 90 °4
Slew Rate SRtyp 0.6 V/us4
Input Noise Voltage Enif = 0.1 Hz to 10 Hztyp 6.1 uVp-p4
Input Noise Voltage Density enif = 1 kHztyp 28 nV/Hz4
Input Noise Current Density inif = 1 kHztyp 0.6 fA/Hz4
Industrial Temperature Range TAIndustrial grademin -40 · max 85 °C4
Operating Temperature Range TANote 1: industrial devices operate over this extended range with reduced performancemin -40 · max 125 °C4
Storage Temperature Range TAmin -65 · max 150 °C4
Thermal Resistance, 14-Lead SOIC JA14-Lead SOICtyp 120 °C/W4

Parameters

21
Amplifier Type
General Purpose
Common Mode Rejection Ratio(CMRR)
76dB
Current - Supply
400uA
Features
ESD Protection
Gain Bandwidth Product
1MHz
Ib - Input Bias Current
1pA
Input Offset Current(Ios)
1pA
Input Offset Voltage Drift(Vos TC)
2uV/℃
Input Voltage Noise Density
28nV/√Hz@1kHz
Junction Temperature(Max)
150℃
Number of Channels
4
Operating Temperature
-40℃~+85℃
Output Current
23mA
Output Current per Pin(Max)
30mA
Quiescent Current
100uA
Rail to Rail
Rail-to-Rail Input, Rail-to-Rail Output
Single supply
1.8V~6V
Slew Rate
600V/ms
Thermal Resistance(Junction to Ambient)
120℃/W
Voltage - Supply(Absolute Max)
7V
Vos - Input Offset Voltage
4.5mV

Order codes

2

Pinout

14
The pins of the MCP6004-I/SL
PinNameType
1—Output
2-Input
3+Input
4V+Power in
5+Input
6-Input
7—Output
8—Output
9-Input
10+Input
11V-Power in
12+Input
13-Input
14—Output

Open-source boards using it

All 5
  • 2 layers70 × 45 mmUgrow3, the printed circuit board in 3D

    Ugrow3

    Dhyan-M/MuGrow-TA

    This folder contains the completed Step 4 software design package. It starts from the released Step 3 five-sheet schematic, keeps every Step 2 optical/mechanical lock, separates high-current, digital-control and…

    81 parts
  • 2 layers86.4 × 54.6 mmBBB GVS-3, the printed circuit board in 3D

    BBB GVS-3

    land-boards/lb-boards

    land-boards - Board Designs

    52 parts31
  • 2 layers87 × 95 mmBBB IND-01, the printed circuit board in 3D

    BBB IND-01

    land-boards/lb-boards

    land-boards - Board Designs

    65 parts31
  • 2 layers70 × 45 mmUgrow3, the printed circuit board in 3D

    Ugrow3

    Dhyan-M/MuGrow-TA

    This folder contains the completed Step 4 software design package. It starts from the released Step 3 five-sheet schematic, keeps every Step 2 optical/mechanical lock, separates high-current, digital-control and…

    81 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP6004-I/SL" title="MCP6004-I/SL in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/microchip/MCP6004-I/SL.jpg" alt="MCP6004-I/SL" width="1200" height="900">
A picture that opens the part, for a README
[![MCP6004-I/SL](https://pcbkit.io/embed/parts/microchip/MCP6004-I/SL.jpg?size=s)](https://pcbkit.io/parts/microchip/MCP6004-I/SL)

Questions

Is there a KiCad symbol and footprint for the MCP6004-I/SL?

Yes. The symbol is Amplifier_Operational:MCP6004 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6004-I/SL?

SOIC-14, with 14 pins. Its footprint is drawn on this page.

Where is the MCP6004-I/SL datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6004-I/SL?

JLCPCB lists it as part C7378, with 8,549 in stock; the sellers' links on this page open their listings.

What can replace the MCP6004-I/SL?

Parts like it in the library: the LM324D by onsemi, the LM2902DT by STMicroelectronics, the LM324DT by STMicroelectronics and the LMV324ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6004-I/SL?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8