MCP3918A1-E/ML
Microchip TechnologyExtended
-40℃~+125℃ 0.1% 1 1.2V 10000:1 16MHz 1mA 2.7V~3.6V 9ppm/℃ Digital calibration and compensation、Programmable gain、Built-in reference source SPI Single-Phase Energy Metering IC QFN-20-EP(4x4) Energy Metering ROHS
- Part id
- microchip/MCP3918A1-E/ML
- Category
- Energy Metering
- Package
- QFN-20-EP(4x4)
- Pins
- 21
- In stock
- 25 at JLCPCB (C637699)
Overview
The MCP3918A1-E/ML is an energy Metering made by Microchip Technology in a QFN-20-EP(4x4) package with 21 pins. -40℃~+125℃ 0.1% 1 1.2V 10000:1 16MHz 1mA 2.7V~3.6V 9ppm/℃ Digital calibration and compensation、Programmable gain、Built-in reference source SPI Single-Phase Energy Metering IC QFN-20-EP(4x4) Energy Metering ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP3918A1T-E_ML, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-20_L4.0-W4.0-P0.50-BL-EP2.7, from EasyEDA), ready for a KiCad board. 25 are in stock at JLCPCB (part C637699).
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | CH0+ | Unspecified |
| 2 | CH0- | Unspecified |
| 3 | NC | Unspecified |
| 4 | NC | Unspecified |
| 5 | AGND | Unspecified |
| 6 | REFIN+/OUT | Unspecified |
| 7 | REFIN | Unspecified |
| 8 | DGND | Unspecified |
| 9 | NC | Unspecified |
| 10 | MDAT0 | Unspecified |
| 11 | DR#/GAIN1 | Unspecified |
| 12 | OSC1/CLKI/GAIN0 | Unspecified |
| 13 | OSC2/MODE | Unspecified |
| 14 | CS#/BOOST | Unspecified |
| 15 | SCK/MCLK | Unspecified |
| 16 | SDO | Unspecified |
| 17 | SDI/OSR1 | Unspecified |
| 18 | RESET#/OSR0 | Unspecified |
| 19 | DVDD | Unspecified |
| 20 | AVDD | Unspecified |
| 21 | GND | Unspecified |
Parts like it
2STPM34
QFN-32-EP(5x5)-40℃~+85℃ 0.1% 1.18V 16MHz 2.95V~3.65V 3.6kHz 30ppm/℃ 4 4.3mA 5000:1 Pulse output、Interrupt control、Fault detection、Digital calibration and compensation、Programmable gain、Built-in reference source、Energy accumulation engine、Built-in digital filter SPI、UART Single-Phase Energy Metering IC QFN-32-EP(5x5) Energy Metering ROHSSTMicroelectronicsEnergy MeteringSTPM32
QFN-24-EP(4x4)-40℃~+85℃ 0.1%、0.5% 1.18V 16MHz 2.95V~3.65V 3.6kHz 30ppm/℃ 4 4.3mA 5000:1 Pulse output、Interrupt control、Fault detection、Digital calibration and compensation、Programmable gain、Built-in reference source、Energy accumulation engine、Built-in digital filter SPI、UART Single-Phase Energy Metering IC QFN-24-EP(4x4) Energy Metering ROHSSTMicroelectronicsEnergy Metering
Questions
Is there a KiCad symbol and footprint for the MCP3918A1-E/ML?
Yes. The symbol is EasyEDA_Cloud:MCP3918A1T-E_ML and the footprint EasyEDA_Cloud:QFN-20_L4.0-W4.0-P0.50-BL-EP2.7, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP3918A1-E/ML?
QFN-20-EP(4x4), with 21 pins. Its footprint is drawn on this page.
Where is the MCP3918A1-E/ML datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP3918A1-E/ML?
JLCPCB lists it as part C637699, with 25 in stock; the sellers' links on this page open their listings.
What can replace the MCP3918A1-E/ML?
Parts like it in the library: the STPM34 by STMicroelectronics and the STPM32 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.