Skip to the content
1234567891011121314151617181920

MCP3564-E/ST

Microchip TechnologyExtended

-40℃~+125℃ 107.2dB 153.6kHz 153.6kHz 1MHz~20MHz、4.9152MHz 2.7V~3.6V 24 4 500ppb/℃ 5uA Built-in External External、Built-in SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHS

Part id
microchip/MCP3564-E/ST
Category
Analog To Digital Converters (ADC)
Package
TSSOP-20
Pins
20
In stock
47 at JLCPCB (C1012816)
Used on
6 open-source boards

Overview

The MCP3564-E/ST is an analog To Digital Converter made by Microchip Technology in a TSSOP-20 package with 20 pins. -40℃~+125℃ 107.2dB 153.6kHz 153.6kHz 1MHz~20MHz、4.9152MHz 2.7V~3.6V 24 4 500ppb/℃ 5uA Built-in External External、Built-in SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP3464-E_ST, from EasyEDA) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 47 are in stock at JLCPCB (part C1012816). 6 open-source boards in 3 repositories on GitHub use it.

Symbol

1AVDD2AGND3REFIN-4REFIN+5CH06CH17CH28CH39CH410CH511CH612CH713CS#14SCK15SDI16SDO17IRQ#/MDAT18MCLKIN19DGND20DVDD
EasyEDA_Cloud:MCP3464-E_STFrom EasyEDA

Footprint

1234567891011121314151617181920
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmFrom KiCad's library

Pinout

20
The pins of the MCP3564-E/ST
PinNameType
1AVDDUnspecified
2AGNDUnspecified
3REFIN-Unspecified
4REFIN+Unspecified
5CH0Unspecified
6CH1Unspecified
7CH2Unspecified
8CH3Unspecified
9CH4Unspecified
10CH5Unspecified
11CH6Unspecified
12CH7Unspecified
13CS#Unspecified
14SCKUnspecified
15SDIUnspecified
16SDOUnspecified
17IRQ#/MDATUnspecified
18MCLKINUnspecified
19DGNDUnspecified
20DVDDUnspecified

Open-source boards using it

6
  • 4 layers91.9 × 53.2 mmPhoenix main board, the printed circuit board in 3D

    Phoenix main board

    Phalkon-Industries/phoenix-instrument

    Git repo for the content of the new Phoenix ph handheld instrument.

    117 parts2CERN-OHL-S-2.0
  • 4 layers56 × 36 mmQSIT PayloadADCboard, the printed circuit board in 3D

    QSIT PayloadADCboard

    fhnw-ise-qcrypt/qsit_psd_payload_module_kicad

    kicad drawings to interface a position sensitive detector (diode) for the QSIT payload

    63 parts1
  • 4 layers100 × 100 mmDemo LMP7721, the printed circuit board in 3D

    Demo LMP7721

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    299 parts
  • 2 layers100 × 80 mmDemo LMP7721, the printed circuit board in 3D

    Demo LMP7721

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    147 parts
  • 2 layers99.7 × 54.2 mmH ALO kicad libs, the printed circuit board in 3D

    H ALO kicad libs

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    118 parts
  • 2 layers21 × 28 mmOffset h ALO kicad, the printed circuit board in 3D

    Offset h ALO kicad

    h-ALO/h-ALO-kicad-libs

    The sensor consist of OLED and OPD

    37 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP3564-E/ST?

Yes. The symbol is EasyEDA_Cloud:MCP3464-E_ST and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP3564-E/ST?

TSSOP-20, with 20 pins. Its footprint is drawn on this page.

Where is the MCP3564-E/ST datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP3564-E/ST?

JLCPCB lists it as part C1012816, with 47 in stock; the sellers' links on this page open their listings.

What can replace the MCP3564-E/ST?

Parts like it in the library: the MCP3464R-E/ST by Microchip Technology, the SIG5530A-ITSP20-RL by Signal Micro, the ADS1230IPW by Texas Instruments and the NAU7802SGI by Nuvoton Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP3564-E/ST?

6 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.