Skip to the content
12345678

MCP2562-E/SN

Microchip TechnologyExtended

-40℃~+125℃ 1 1Mbps 1uA 4.5V~5.5V 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHS

Part id
microchip/MCP2562-E/SN
Category
CAN Transceivers
Package
SOIC-8
Pins
8
In stock
8,643 at JLCPCB (C191417)
Used on
9 open-source boards

Overview

The MCP2562-E/SN is a CAN Transceiver made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 1Mbps 1uA 4.5V~5.5V 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Horizon_ic:MCP2562-E_SN, from Horizon) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 8,643 are in stock at JLCPCB (part C191417). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

7CANH8STBY5VIO6CANL2VSS4RXD3VDD1TXD
Horizon_ic:MCP2562-E_SNFrom Horizon

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
4.5 V · VDD, recommended operating min · p. 9
Supply, most
5.5 V · VDD, recommended operating max · p. 9
Supply, least
1.8 V · VIO, recommended operating min · p. 9
Supply, absolute maximum
7 V · VDD, absolute max · p. 8
Works from
-40 °C · Extended (E) ambient min · p. 1
Works up to
125 °C · Extended (E) ambient max · p. 1
Junction, hottest
190 °C · Virtual junction temperature absolute max · p. 8
Takes working
45.09 mA · sum of VDD and VIO typical dominant supply currents, VTXD = 0V · p. 9
Takes at most
70.5 mA · sum of VDD and VIO max dominant supply currents, VTXD = 0V · p. 9
Takes asleep
5 µA · Standby typical, includes IIO · p. 9
Data rate, most
1 Mbit/s · CAN operation max · p. 1
Junction to air (8L-SOIC)
149.5 K/W · Junction to ambient typical · p. 16

What it is and has

6
CAN speed
1 Mb/s · p. 1
Digital I/O
VIO pin with internal level shifter · p. 1
Protection
Automatic thermal shutdown · p. 1
System voltage suitability
12V and 24V systems · p. 1
Package options
PDIP-8L, SOIC-8L and 3x3 DFN-8L · p. 1
Temperature grade
Extended (E): -40°C to +125°C · p. 1

Specifications

75
ParameterConditionsAs printedPage
VDD VDDmax 7 V8
VIO VIOmax 7 V8
DC Voltage at TXD, RXD, STBY and VSSUpper limit VIO + 0.3Vmin -0.3 V8
DC Voltage at CANH, CANL and SPLITmin -58 · max 58 V8
Transient Voltage on CANH, CANLISO-7637; Figure 2-5min -150 · max 100 V8
Storage temperaturemin -55 · max 150 °C8
Operating ambient temperaturemin -40 · max 150 °C8
Virtual Junction Temperature, TVJ (IEC60747-1) TVJmin -40 · max 190 °C8
Soldering temperature of leads10 secondsmax 300 °C8
ESD protection on CANH and CANL pins for MCP2562MCP2562; IEC 61000-4-2min -8 · max 8 kV8
ESD protection on CANH and CANL pinsIEC 801; Human Body Modelmin -8 · max 8 kV8
ESD protection on all other pinsIEC 801; Human Body Modelmin -4 · max 4 kV8
ESD protection on all pinsIEC 801; Machine Modelmin -300 · max 300 V8
ESD protection on all pinsIEC 801; Charge Device Modelmin -750 · max 750 V8
Voltage Range VDDVDD pin; Extended (E): TAMB = -40°C to +125°Cmin 4.5 · max 5.5 V9
Supply Current IDDRecessive; VTXD = VDDtyp 5 · max 10 mA9
Supply Current IDDDominant; VTXD = 0Vtyp 45 · max 70 mA9
Standby Current IDDSMCP2562; Includes IIOtyp 5 · max 15 uA9
High Level of the POR Comparator VPORHmin 3.8 · max 4.3 V9
Low Level of the POR Comparator VPORLmin 3.4 · max 4 V9
Hysteresis of POR Comparator VPORDmin 0.3 · max 0.8 V9
Digital Supply Voltage Range VIOMCP2562; VIO pinmin 1.8 · max 5.5 V9
Supply Current on VIO IIOMCP2562; Recessive; VTXD = VIOtyp 4 · max 30 uA9
Supply Current on VIO IIOMCP2562; Dominant; VTXD = 0Vtyp 85 · max 500 uA9
Standby Current IDDSVIO pin; MCP2562; Note 1: Characterized; not 100% testedtyp 0.3 · max 1 uA9
Undervoltage detection on VIO VUVD(IO)MCP2562; Note 1: Characterized; not 100% testedtyp 1.2 V9
CANH; CANL: Recessive Bus Output Voltage VO(R)VTXD = VDD; No load; typical = 0.5VDDmin 2 · max 3 V9
CANH; CANL: Bus Output Voltage in Standby VO(S)STBY = VTXD = VDD; No loadmin -0.1 · typ 0 · max 0.1 V9
Recessive Output Current IO(R)-24V < VCAN < +24Vmin -5 · max 5 mA9
CANH: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 2.75 · typ 3.5 · max 4.5 V9
CANL: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V9
Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M)VTXD = VSS; Note 1min -400 · typ 0 · max 400 mV9
Dominant: Differential Output Voltage VO(DIFF)VTXD = VSS; RL = 50 to 65; Figure 2-2, Figure 2-4min 1.5 · typ 2 · max 3 V9
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDD; Figure 2-2, Figure 2-4min -120 · typ 0 · max 12 mV9
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDD, no load; Figure 2-2, Figure 2-4min -500 · typ 0 · max 50 mV9
CANH: Short Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floatingmin -120 · typ -85 mA10
CANH: Short Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floating; VDD=5V, TAMB = +25°C; Note 1min -100 mA10
CANL: Short Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floatingtyp 75 · max 120 mA10
CANL: Short Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floating; VDD=5V, TAMB = +25°C; Note 1max 100 mA10
Recessive Differential Input Voltage VDIFF(R)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3min -1 · max 0.5 V10
Recessive Differential Input Voltage VDIFF(R)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3min -1 · max 0.4 V10
Dominant Differential Input Voltage VDIFF(D)(I)Normal Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3; max = VDDmin 0.9 V10
Dominant Differential Input Voltage VDIFF(D)(I)Standby Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3; max = VDDmin 1 V10
Differential Receiver Threshold VTH(DIFF)Normal Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3min 0.5 · typ 0.7 · max 0.9 V10
Differential Receiver Threshold VTH(DIFF)Standby Mode; -12V < V(CANH, CANL) < +12V; Figure 2-6; Note 3min 0.4 · max 1.15 V10
Differential Input Hysteresis VHYS(DIFF)Normal mode, see Figure 2-6; Note 1min 50 · max 200 mV10
Common Mode Input Resistance RINNote 1min 10 · max 30 k10
Common Mode Resistance Matching RIN(M)VCANH = VCANL; Note 1min -1 · typ 0 · max 1 %10
Differential Input Resistance RIN(DIFF)Note 1min 10 · max 100 k10
Common Mode Input Capacitance CIN(CM)VTXD = VDD; Note 1max 20 pF10
Differential Input Capacitance CIN(DIFF)VTXD = VDD; Note 1max 10 pF10
CANH, CANL: Input Leakage ILIMCP2562; VDD = VTXD = VSTBY = 0V; VIO = 0V; VCANH = VCANL = 5 Vmin -5 · max 5 uA10
Low-Level Input Voltage VILTXD, STBY; max = 0.3VIOmin -0.3 V11
High-Level Input Current IIHTXD, STBYmin -1 · max 1 uA11
TXD: Low-Level Input Current IIL(TXD)min -270 · typ -150 · max -30 uA11
STBY: Low-Level Input Current IIL(STBY)min -30 · max -1 uA11
Low-Level Output Voltage VOLIOL = 4 mA; typical 8 mAmax 0.4 V11
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V; Note 1min 165 · typ 175 · max 185 °C11
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V; Note 1min 20 · max 30 °C11
Bit Time tBITmin 1 · max 69.44 us13
Bit Frequency fBITmin 14.4 · max 1000 kHz13
Delay TXD Low to Bus Dominant tTXD-BUSONmax 70 ns13
Delay TXD High to Bus Recessive tTXD-BUSOFFmax 125 ns13
Delay Bus Dominant to RXD tBUSON-RXDmax 70 ns13
Delay Bus Recessive to RXD tBUSOFF-RXDmax 110 ns13
Propagation Delay TXD to RXD tTXD - RXDNegative edge on TXDmax 125 ns13
Propagation Delay TXD to RXD tTXD - RXDPositive edge on TXDmax 235 ns13
Delay Bus Dominant to RXD (Standby mode) tFLTR(WAKE)Standby modemin 0.5 · typ 1 · max 4 us13
Delay Standby to Normal Mode tWAKENegative edge on STBYmin 5 · typ 25 · max 40 us13
Permanent Dominant Detect Time tPDTTXD = 0Vtyp 1.25 ms13
Permanent Dominant Timer Reset tPDTRThe shortest recessive pulse on TXD or CAN bus to reset Permanent Dominant Timertyp 100 ns13
Specified Temperature Range TAExtended (E)min -40 · max 125 C16
Operating Temperature Range TAmin -40 · max 150 C16
Storage Temperature Range TAmin -65 · max 155 C16
Thermal Resistance, 8L-SOIC JA8L-SOICtyp 149.5 C/W16

Pins, by the datasheet

8
1 TXD
Transmit Data Input; low selects dominant and high selects recessive bus state. · p. 4
2 VSS
Ground. · p. 4
3 VDD
Supply Voltage; supplies the transmitter and receiver, including the wake-up receiver. · p. 4
4 RXD
Receive Data Output; high indicates recessive and low indicates dominant bus state. · p. 4
5 VIO
Digital I/O Supply Pin – MCP2562 only. · p. 4
6 CANL
CAN Low-Level Voltage I/O. · p. 4
7 CANH
CAN High-Level Voltage I/O. · p. 4
8 STBY
Standby Mode Input; low selects Normal mode and high selects Standby mode. · p. 4

Open-source boards using it

9See all 9
  • 2 layers75 × 35 mmCANPower, the printed circuit board in 3D

    CANPower

    RaphWeyman/CANPower

    Accessory power controller for BMW CAN bus bikes

    66 parts10GPL-2.0
  • 4 layers110 × 90 mmURC, the printed circuit board in 3D

    URC

    spikonado/URC

    Universal Robot Controller

    180 parts2CERN-OHL-W-2.0
  • 2 layers88.9 × 78.7 mmWr rusefi, the printed circuit board in 3D

    Wr rusefi

    mck1117/wr-rusefi

    Georgia Tech Wreck Racing's implementation of a Rusefi compatible ECU

    147 parts1
  • 2 layers160 × 100 mmInterface board, the printed circuit board in 3D

    Interface board

    cepr/daly-to-lithium-balance-adapter

    Replacement traction battery for a 2018 Energica Ego. The original Lithium Balance s-BMS master (BMCU) stays in the bike.

    112 parts
  • 2 layers51.7 × 30.5 mmCommunication hub, the printed circuit board in 3D

    Communication hub

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    7 parts3
  • 2 layers55 × 23 mmGreen Pill stlink, the printed circuit board in 3D

    Green Pill stlink

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    42 parts3
  • 2 layers51.2 × 23 mmSpeedy barebone, the printed circuit board in 3D

    Speedy barebone

    UofA-SPEAR/pcb_designs

    A place for SPEAR PCBs

    23 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2562-E/SN?

Yes. The symbol is Horizon_ic:MCP2562-E_SN and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2562-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP2562-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2562-E/SN?

JLCPCB lists it as part C191417, with 8,643 in stock; the sellers' links on this page open their listings.

What can replace the MCP2562-E/SN?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2562-E/SN?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.