Skip to the content
123456789101112131415

MCP2517FD-H/JHA

Microchip TechnologyExtended

-40℃~+150℃ 10uA 12mA 2.7V~5.5V 8Mbps CAN FD Controller Programmable error warning limit、Programmable bit timing、Bus status monitoring、Baud rate configuration、Monitor mode、Low-power mode、Auto retransmission control SPI VDFN-14-EP(3x4.5) CAN Controllers ROHS

Part id
microchip/MCP2517FD-H/JHA
Category
CAN Controllers
Package
VDFN-14-EP(3x4.5)
Pins
15
In stock
24 at JLCPCB (C191563)
Used on
1 open-source board

Overview

The MCP2517FD-H/JHA is a CAN Controller made by Microchip Technology in a VDFN-14-EP(3x4.5) package with 15 pins. -40℃~+150℃ 10uA 12mA 2.7V~5.5V 8Mbps CAN FD Controller Programmable error warning limit、Programmable bit timing、Bus status monitoring、Baud rate configuration、Monitor mode、Low-power mode、Auto retransmission control SPI VDFN-14-EP(3x4.5) CAN Controllers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP2518FDT-E_QBB, from EasyEDA) and its footprint (EasyEDA_Cloud:VDFN-14_L4.5-W3.0-P0.65-BL-EP, from EasyEDA), ready for a KiCad board. 24 are in stock at JLCPCB (part C191563). 1 open-source board in 1 repository on GitHub use it.

Symbol

15EPAD14VDD13nCS12SDO11SDI10SCK9INT0#/GPIO0/XSTBY8INT1#/GPIO17VSS6OSC15OSC24INT#3CLKO/SOF2RXCAN1TXCAN
EasyEDA_Cloud:MCP2518FDT-E_QBBFrom EasyEDA

Footprint

123456789101112131415
EasyEDA_Cloud:VDFN-14_L4.5-W3.0-P0.65-BL-EPFrom EasyEDA

Pinout

15
The pins of the MCP2517FD-H/JHA
PinNameType
1TXCANUnspecified
2RXCANUnspecified
3CLKO/SOFUnspecified
4INT#Unspecified
5OSC2Unspecified
6OSC1Unspecified
7VSSUnspecified
8INT1#/GPIO1Unspecified
9INT0#/GPIO0/XSTBYUnspecified
10SCKUnspecified
11SDIUnspecified
12SDOUnspecified
13nCSUnspecified
14VDDUnspecified
15EPADUnspecified

Open-source boards using it

1
  • 4 layers90.2 × 95.9 mmHEDGE2-SCI, the printed circuit board in 3D

    HEDGE2-SCI

    yrromero04/HEDGE2-SCI_PCB

    87 parts

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the MCP2517FD-H/JHA?

Yes. The symbol is EasyEDA_Cloud:MCP2518FDT-E_QBB and the footprint EasyEDA_Cloud:VDFN-14_L4.5-W3.0-P0.65-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2517FD-H/JHA?

VDFN-14-EP(3x4.5), with 15 pins. Its footprint is drawn on this page.

Where is the MCP2517FD-H/JHA datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2517FD-H/JHA?

JLCPCB lists it as part C191563, with 24 in stock; the sellers' links on this page open their listings.

What can replace the MCP2517FD-H/JHA?

Parts like it in the library: the MCP2518FD-E/QBB by Microchip Technology and the XLP2518FDT/EBB by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2517FD-H/JHA?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.