MCP2515-E/ML
Microchip TechnologyExtended
-40℃~+125℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI QFN-20(4x4) CAN Controllers ROHS
- Part id
- microchip/MCP2515-E/ML
- Category
- CAN Controllers
- Package
- QFN-20(4x4)
- Pins
- 20
- In stock
- 42 at JLCPCB (C637693)
Overview
The MCP2515-E/ML is a CAN Controller made by Microchip Technology in a QFN-20(4x4) package with 21 pins. -40℃~+125℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI QFN-20(4x4) CAN Controllers ROHS.
PCBKit's library has its KiCad symbol (MCP2515_QFN:MCP2515_QFN, from Antmicro) and its footprint (qfn-20-1ep-4x4mm-p0-5mm-ep2-8x2-8mm:QFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm, from Antmicro), ready for a KiCad board. 42 are in stock at JLCPCB (part C637693).
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | CLKOUT | Passive |
| 2 | TX0RTS | Input |
| 3 | TX1RTS | Input |
| 4 | NC | Not connected |
| 5 | TX2RTS | Input |
| 6 | OSC2 | Passive |
| 7 | OSC1 | Passive |
| 8 | GND | Power in |
| 9 | RX1BF | Output |
| 10 | RX0BF | Output |
| 11 | INT | Output |
| 12 | SCK | Input |
| 13 | NC | Not connected |
| 14 | SI | Input |
| 15 | SO | Output |
| 16 | CS | Input |
| 17 | RESET | Input |
| 18 | VDD | Power in |
| 19 | TXCAN | Output |
| 20 | RXCAN | Input |
| 21 | GND | Passive |
Questions
Is there a KiCad symbol and footprint for the MCP2515-E/ML?
Yes. The symbol is MCP2515_QFN:MCP2515_QFN and the footprint qfn-20-1ep-4x4mm-p0-5mm-ep2-8x2-8mm:QFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP2515-E/ML?
QFN-20(4x4), with 21 pins. Its footprint is drawn on this page.
Where is the MCP2515-E/ML datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP2515-E/ML?
JLCPCB lists it as part C637693, with 42 in stock; the sellers' links on this page open their listings.