MCP1253-ADJI/MS
Microchip TechnologyExtended
Low ripple / low noise architecture、Output short-circuit protection、Soft-start、Low-power standby MSOP-8 Charge Pumps ROHS
- Part id
- microchip/MCP1253-ADJI/MS
- Category
- Charge Pumps
- Package
- MSOP-8
- Pins
- 8
- In stock
- 5 at JLCPCB (C626993)
Overview
The MCP1253-ADJI/MS is a charge Pump made by Microchip Technology in a MSOP-8 package with 8 pins. Low ripple / low noise architecture、Output short-circuit protection、Soft-start、Low-power standby MSOP-8 Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP1253T-ADJI_MS, from EasyEDA) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 5 are in stock at JLCPCB (part C626993).
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | PGOOD | Unspecified |
| 2 | VOUT | Unspecified |
| 3 | VIN | Unspecified |
| 4 | GND | Unspecified |
| 5 | C- | Unspecified |
| 6 | C+ | Unspecified |
| 7 | SHDN# | Unspecified |
| 8 | FB | Unspecified |
Parts like it
8MCP1252-ADJI/MS
MSOP-8Output short-circuit protection、Soft-start、Low-power standby、Digital control MSOP-8 Charge Pumps ROHSMicrochip TechnologyCharge PumpsMCP1253-33X50I/MS
MSOP-8MSOP-8 Charge Pumps ROHSMicrochip TechnologyCharge PumpsMAX1595EUA50+T
MSOP-8MSOP-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsMCP1252-33X50I/MS
MSOP-8-40℃~+85℃ 120mA 120uA 2V~5.5V 3.3V、5V 650kHz 81% Buck-Boost MSOP-8 Charge Pumps ROHSMicrochip TechnologyCharge PumpsMAX1595EUA33+T
MSOP-8-40℃~+85℃ 1.8V~5.5V 125mA 1MHz 3.3V 320uA Buck-Boost MSOP-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsICL7660MM/TR
MSOP-8Cascade support MSOP-8 Charge Pumps ROHSHGSEMICharge PumpsMAX865EUA+T
MSOP-8-40℃~+85℃ 1.15mA 1.5V~6V 24kHz 75Ω 85% Inverted、boost converter MSOP-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsMAX865EUA+
MSOP-8MSOP-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge Pumps
Questions
Is there a KiCad symbol and footprint for the MCP1253-ADJI/MS?
Yes. The symbol is EasyEDA_Cloud:MCP1253T-ADJI_MS and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP1253-ADJI/MS?
MSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the MCP1253-ADJI/MS datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP1253-ADJI/MS?
JLCPCB lists it as part C626993, with 5 in stock; the sellers' links on this page open their listings.
What can replace the MCP1253-ADJI/MS?
Parts like it in the library: the MCP1252-ADJI/MS by Microchip Technology, the MCP1253-33X50I/MS by Microchip Technology, the MAX1595EUA50+T by Maxim Integrated (Analog Devices) and the MCP1252-33X50I/MS by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.