
Robohub prototype v1 ddr chip2
jackfrye/robohub_prototype_v1
ATSAMA based board for command and control of future robotics systems
Microchip Technology
10 Base -T/100 Base-TX Physical Layer Transceiver, RMII Interface, Commercial Grade
The KSZ8081RNBCA is an uncategorised made by Microchip Technology in a QFN32 package with 33 pins. 10 Base -T/100 Base-TX Physical Layer Transceiver, RMII Interface, Commercial Grade.
PCBKit's library has its KiCad symbol (Analog & Interface:KSZ8081RNB [alt], from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P500X500X100-33N-S320, from CERN's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | VDD_1V2 | Power in |
| 3 | VDDA_3V3 | Power in |
| 4 | RXM | Input/output |
| 5 | RXP | Input/output |
| 6 | TXM | Input/output |
| 7 | TXP | Input/output |
| 8 | XO | Output |
| 9 | XI | Input |
| 10 | REXT | Input |
| 11 | MDIO | Input/output |
| 12 | MDC | Input |
| 13 | PHYAD0 | Input/output |
| 14 | PHYAD1 | Input/output |
| 15 | RXD1/PHYAD2 | Input/output |
| 16 | RXD0/DUPLEX | Input/output |
| 17 | VDDIO | Power in |
| 18 | CRS_DV/CONFIG2 | Input/output |
| 19 | REF_CLK/B-CAST_OFF | Input/output |
| 20 | RXER/ISO | Input/output |
| 21 | INTRP/NAND_Tree | Input/output |
| 22 | NC | Passive |
| 23 | TXEN | Input |
| 24 | TXD0 | Input |
| 25 | TXD1 | Input |
| 26 | NC | Passive |
| 27 | NC | Passive |
| 28 | CONFIG0 | Input/output |
| 29 | CONFIG1 | Input/output |
| 30 | LED0/NWAYEN | Input/output |
| 31 | LED1/SPEED | Input/output |
| 32 | RST | Input |
| 33 | GND | Power in |

jackfrye/robohub_prototype_v1
ATSAMA based board for command and control of future robotics systems

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
Yes. The symbol is Analog & Interface:KSZ8081RNB [alt] and the footprint ICs And Semiconductors SMD:QFN50P500X500X100-33N-S320, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN32, with 33 pins. Its footprint is drawn on this page.
Parts like it in the library: the HMC637BPM5E by Analog Devices, the F1241NBGI by INTEGRATED DEVICE TECHNOLOGY, the MAX4999ETJ by Maxim Integrated (Analog Devices) and the SY58029UMG by MICREL. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.