
Wild Spy Open Source Timer 3ch 16mm coin REV0
Wild-Spy/OSTBoardHardware
Hardware design for the Open Source Timer board.
Microchip TechnologyExtended
-40℃~+85℃ 1.6V~3.6V 12bit 1KB 32KB 32MHz 34 4KB 8/16 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Software reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Calendar function TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
The ATXMEGA32C4-AU is a microcontroller made by Microchip Technology in a TQFP-44(10x10) package with 44 pins. -40℃~+85℃ 1.6V~3.6V 12bit 1KB 32KB 32MHz 34 4KB 8/16 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Software reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Calendar function TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATxmega32C4-A, from KiCad's library) and its footprint (Package_QFP:TQFP-44_10x10mm_P0.8mm, from KiCad's library), ready for a KiCad board. 5 are in stock at JLCPCB (part C1338790). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | PA5 | Input/output |
| 2 | PA6 | Input/output |
| 3 | PA7 | Input/output |
| 4 | AREFB/PB0 | Input/output |
| 5 | PB1 | Input/output |
| 6 | PB2 | Input/output |
| 7 | PB3 | Input/output |
| 8 | GND | Power in |
| 9 | VCC | Power in |
| 10 | PC0 | Input/output |
| 11 | PC1 | Input/output |
| 12 | PC2 | Input/output |
| 13 | PC3 | Input/output |
| 14 | PC4 | Input/output |
| 15 | PC5 | Input/output |
| 16 | PC6 | Input/output |
| 17 | PC7 | Input/output |
| 18 | GND | Passive |
| 19 | VCC | Passive |
| 20 | PD0 | Input/output |
| 21 | PD1 | Input/output |
| 22 | PD2 | Input/output |
| 23 | PD3 | Input/output |
| 24 | PD4 | Input/output |
| 25 | PD5 | Input/output |
| 26 | PD6 | Input/output |
| 27 | PD7 | Input/output |
| 28 | PE0 | Input/output |
| 29 | PE1 | Input/output |
| 30 | GND | Passive |
| 31 | VCC | Passive |
| 32 | PE2 | Input/output |
| 33 | PE3 | Input/output |
| 34 | PDI_DATA | Input/output |
| 35 | RESET/PDI_CLK | Input |
| 36 | PR0/XTAL1 | Input/output |
| 37 | PR1/XTAL2 | Input/output |
| 38 | GND | Passive |
| 39 | AVCC | Power in |
| 40 | AREFA/PA0 | Input/output |
| 41 | PA1 | Input/output |
| 42 | PA2 | Input/output |
| 43 | PA3 | Input/output |
| 44 | PA4 | Input/output |

Wild-Spy/OSTBoardHardware
Hardware design for the Open Source Timer board.
Yes. The symbol is MCU_Microchip_ATmega:ATxmega32C4-A and the footprint Package_QFP:TQFP-44_10x10mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TQFP-44(10x10), with 44 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C1338790, with 5 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STC89C52RC-40I by STC, the PIC16F1939-I/PT by Microchip Technology, the STC8A8K64D4-45I-LQFP44 by STC Micro and the PIC16F1937-I/PT by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.