Skip to the content
1234567891011121314151617181920

ATTINY261A-PU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 128Byte 128Byte 16 20MHz 2KB 8 Bit AVR Built-in FLASH DIP-20 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY261A-PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
DIP-20
Pins
20
In stock
0 at JLCPCB (C144317)
Used on
2 open-source boards

Overview

The ATTINY261A-PU is a microcontroller made by Microchip Technology in a DIP-20 package with 20 pins. -40℃~+85℃ 1.8V~5.5V 10bit 128Byte 128Byte 16 20MHz 2KB 8 Bit AVR Built-in FLASH DIP-20 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny261A-P, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C144317). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1PB02PB13PB24PB35VCC6GND7XTAL1/PB48XTAL2/PB59PB610RESET/PB711PA712PA613PA514PA415AVCC16AGND17AREF/PA318PA219PA120PA0
MCU_Microchip_ATtiny:ATtiny261A-PFrom KiCad's library

Footprint

1234567891011121314151617181920
Package_DIP:DIP-20_W7.62mmFrom KiCad's library

Pinout

20
The pins of the ATTINY261A-PU
PinNameType
1PB0Input/output
2PB1Input/output
3PB2Input/output
4PB3Input/output
5VCCPower in
6GNDPower in
7XTAL1/PB4Input/output
8XTAL2/PB5Input/output
9PB6Input/output
10RESET/PB7Input/output
11PA7Input/output
12PA6Input/output
13PA5Input/output
14PA4Input/output
15AVCCPower in
16AGNDPower in
17AREF/PA3Input/output
18PA2Input/output
19PA1Input/output
20PA0Input/output

Open-source boards using it

2
  • 2 layers74 × 63.2 mmRNG, the printed circuit board in 3D

    RNG

    seanboyce/TRNG

    A spicy little quantum TRNG that pushes out MQTT

    30 parts10
  • 2 layers99.8 × 99.8 mmMy Motorola IO, the printed circuit board in 3D

    My Motorola IO

    lenzjo/MECB-SYS-IO

    I have brought out all available outputs along the top of the PCB, however, the PS/2 clock and data signals are also on the connector (pins C11 and A12 repectively) as are TxD (A16), RxD (A17), RTS (C16) and CTS (C19).

    37 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY261A-PU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny261A-P and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY261A-PU?

DIP-20, with 20 pins. Its footprint is drawn on this page.

Where is the ATTINY261A-PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY261A-PU?

JLCPCB lists it as part C144317, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY261A-PU?

Parts like it in the library: the AT89C2051-24PU by Microchip Technology, the AT89C4051-24PU by Microchip Technology, the ATTINY2313A-PU by Microchip Technology and the ATTINY4313-PU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY261A-PU?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.