Skip to the content
12345678

ATTINY25-20SH

Microchip TechnologyExtended

-40℃~+85℃ 128Byte 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY25-20SH
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-8-208mil
Pins
8
In stock
0 at JLCPCB (C1338883)
Used on
5 open-source boards

Overview

The ATTINY25-20SH is a microcontroller made by Microchip Technology in a SOIC-8-208mil package with 8 pins. -40℃~+85℃ 128Byte 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny25-20S, from KiCad's library) and its footprint (Package_SO:SOIC-8_5.3x5.3mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1338883). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1RESET/PB52XTAL1/PB33XTAL2/PB44GND5AREF/PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny25-20SFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_5.3x5.3mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the ATTINY25-20SH
PinNameType
1RESET/PB5Input/output
2XTAL1/PB3Input/output
3XTAL2/PB4Input/output
4GNDPower in
5AREF/PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

5
  • 2 layers10.7 × 20.7 mmUltraCIC III, the printed circuit board in 3D

    UltraCIC III

    ManCloud/UltraCIC-III

    N64 CIC replacement

    4 parts54GPL-3.0
  • 2 layers50.1 × 46 mmRGB controller, the printed circuit board in 3D

    RGB controller

    MohamedHassanExp/RGB-LED-controller-

    Attiny 45 based RGB controller utilizing three ws2811 ICs to control 9 RGB LEDs (3 LEDs each)

    29 partsMIT
  • 4 layers95.5 × 101.6 mmBasschorus, the printed circuit board in 3D

    Basschorus

    rabidaudio/effects

    Effects pedals and stomboxes

    159 parts
  • 2 layers54.5 × 16.2 mmProiectPCB, the printed circuit board in 3D

    ProiectPCB

    allbeertoo/Amplificator-Audio

    12 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY25-20SH?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny25-20S and the footprint Package_SO:SOIC-8_5.3x5.3mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY25-20SH?

SOIC-8-208mil, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY25-20SH datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY25-20SH?

JLCPCB lists it as part C1338883, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY25-20SH?

Parts like it in the library: the ATTINY85-20SU by Microchip Technology, the ATTINY13A-SU by Microchip Technology, the ATTINY85-20SF by Microchip Technology and the ATTINY45-20SU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY25-20SH?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.