
ATTINY13A-MMF
Microchip TechnologyExtended
-40℃~+125℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH VFDFN-10(3x3) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- microchip/ATTINY13A-MMF
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- QFN-10-EP(3x3)
- Pins
- 11
- In stock
- 200 at JLCPCB (C617015)
- Used on
- 4 open-source boards
Overview
The ATTINY13A-MMF is a microcontroller made by Microchip Technology in a QFN-10-EP(3x3) package with 11 pins. -40℃~+125℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH VFDFN-10(3x3) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13A-MM, from KiCad's library) and its footprint (EasyEDA_Cloud:QFN-10_L3.0-W3.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 200 are in stock at JLCPCB (part C617015). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | RESET/PB5 | Input/output |
| 2 | PB3 | Input/output |
| 3 | NC | Not connected |
| 4 | PB4 | Input/output |
| 5 | GND | Power in |
| 6 | PB0 | Input/output |
| 7 | PB1 | Input/output |
| 8 | NC | Not connected |
| 9 | PB2 | Input/output |
| 10 | VCC | Power in |
| 11 | GND | Passive |
Open-source boards using it
4- 2 layers8.6 × 6.2 mm

- 2 layers5.1 × 12.2 mm

- 2 layers11.5 × 6 mm

- 2 layers12.7 × 12.7 mm

Start module
yrgohenhal/start_module
Start module used in Robot-SM. New design in KiCad 10 based on https://github.com/p1rse/robot-sumo-start-module/
13 parts
Parts like it
1Questions
Is there a KiCad symbol and footprint for the ATTINY13A-MMF?
Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13A-MM and the footprint EasyEDA_Cloud:QFN-10_L3.0-W3.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ATTINY13A-MMF?
QFN-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.
Where is the ATTINY13A-MMF datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the ATTINY13A-MMF?
JLCPCB lists it as part C617015, with 200 in stock; the sellers' links on this page open their listings.
What can replace the ATTINY13A-MMF?
Parts like it in the library: the ATTINY13A-MMUR by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ATTINY13A-MMF?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.