
MagicFlash64
zschunky/magicFlash64
magicFlash64 is kernal replacement for the Commodore 64 and can be directly erased/programmed from the Commodore 64.
Microchip TechnologyExtended
-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 23 256Byte 4KB 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHS
The ATMEGA48-20PU is a microcontroller made by Microchip Technology in a PDIP-28 package with 28 pins. -40℃~+85℃ 10bit 2.7V~5.5V 20MHz 23 256Byte 4KB 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_Microchip_ATmega:ATmega48-20P, from KiCad's library) and its footprint (Package_DIP:DIP-28_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C220549). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | RESET/PC6 | Input/output |
| 2 | PD0 | Input/output |
| 3 | PD1 | Input/output |
| 4 | PD2 | Input/output |
| 5 | PD3 | Input/output |
| 6 | PD4 | Input/output |
| 7 | VCC | Power in |
| 8 | GND | Power in |
| 9 | XTAL1/PB6 | Input/output |
| 10 | XTAL2/PB7 | Input/output |
| 11 | PD5 | Input/output |
| 12 | PD6 | Input/output |
| 13 | PD7 | Input/output |
| 14 | PB0 | Input/output |
| 15 | PB1 | Input/output |
| 16 | PB2 | Input/output |
| 17 | PB3 | Input/output |
| 18 | PB4 | Input/output |
| 19 | PB5 | Input/output |
| 20 | AVCC | Power in |
| 21 | AREF | Passive |
| 22 | GND | Passive |
| 23 | PC0 | Input/output |
| 24 | PC1 | Input/output |
| 25 | PC2 | Input/output |
| 26 | PC3 | Input/output |
| 27 | PC4 | Input/output |
| 28 | PC5 | Input/output |

zschunky/magicFlash64
magicFlash64 is kernal replacement for the Commodore 64 and can be directly erased/programmed from the Commodore 64.

healyf3/christmas_tree_pcb
This pcb consists of tlc5940 led drivers and an mq3 that light up 37 rgb leds using Kicad version 4
Yes. The symbol is MCU_Microchip_ATmega:ATmega48-20P and the footprint Package_DIP:DIP-28_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
PDIP-28, with 28 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C220549, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ATMEGA328P-PU by Microchip Technology, the PIC16F72-I/SP by Microchip Technology, the PIC16F883-I/SP by Microchip Technology and the PIC16F873A-I/SP by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.