Skip to the content
1234567891011121314151617181920

ATF16V8B-15PU

Microchip TechnologyExtended

5V EEPLD DIP-20 Programmable Logic Device (CPLDs/FPGAs) ROHS

Part id
microchip/ATF16V8B-15PU
Category
Programmable Logic Device (CPLDs, FPGAs)
Package
DIP-20
Pins
20
In stock
783 at JLCPCB (C6509)
Used on
6 open-source boards

Overview

The ATF16V8B-15PU is a programmable Logic Device made by Microchip Technology in a DIP-20 package with 20 pins. 5V EEPLD DIP-20 Programmable Logic Device (CPLDs/FPGAs) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ATF16V8B-10-JC, from EasyEDA) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. 783 are in stock at JLCPCB (part C6509). 6 open-source boards in 3 repositories on GitHub use it.

Symbol

1I/CLK2I13I24I35I46I57I68I79I810GND11I9/OE12I/O13I/O14I/O15I/O16I/O17I/O18I/O19I/O20VCC
EasyEDA_Cloud:ATF16V8B-10-JCFrom EasyEDA

Footprint

1234567891011121314151617181920
Package_DIP:DIP-20_W7.62mmFrom KiCad's library

From the datasheet

5
Supply, absolute maximum
7 V · VCC, absolute maximum, any pin relative to ground, max · p. 4
Works from
-40 °C · industrial operating ambient, min · p. 4
Works up to
85 °C · industrial operating ambient, max · p. 4
Takes at most
95 mA · B-15 clocked supply current, 15 MHz, VCC max, outputs open, max · p. 5
Takes asleep
50 mA · B-15 standby, VCC and VIN max, outputs open, typical · p. 5

Pinout

20
The pins of the ATF16V8B-15PU
PinNameType
1I/CLKUnspecified
2I1Unspecified
3I2Unspecified
4I3Unspecified
5I4Unspecified
6I5Unspecified
7I6Unspecified
8I7Unspecified
9I8Unspecified
10GNDUnspecified
11I9/OEUnspecified
12I/OUnspecified
13I/OUnspecified
14I/OUnspecified
15I/OUnspecified
16I/OUnspecified
17I/OUnspecified
18I/OUnspecified
19I/OUnspecified
20VCCUnspecified

Open-source boards using it

6
  • 2 layers254 × 160 mmDeck65, the printed circuit board in 3D

    Deck65

    and3rson/deck65

    Simple SBC based on 65c02s

    183 parts16GPL-3.0
  • 2 layers50 × 100 mmLB-68B50-02, the printed circuit board in 3D

    LB-68B50-02

    land-boards/lb-boards

    land-boards - Board Designs

    14 parts31
  • 2 layers50 × 100 mmLB-68B50-02, the printed circuit board in 3D

    LB-68B50-02

    land-boards/lb-boards

    land-boards - Board Designs

    9 parts31
  • 2 layers81.5 × 76.2 mmPld test, the printed circuit board in 3D

    Pld test

    gcoonrod/retro-stack

    A retro computer project based on stackable PCB boards.

    39 partsApache-2.0
  • 2 layers99.1 × 99.1 mmRetro stack ram rom, the printed circuit board in 3D

    Retro stack ram rom

    gcoonrod/retro-stack

    A retro computer project based on stackable PCB boards.

    32 partsApache-2.0
  • 2 layers99.1 × 99.1 mmRetro stack via, the printed circuit board in 3D

    Retro stack via

    gcoonrod/retro-stack

    A retro computer project based on stackable PCB boards.

    21 partsApache-2.0

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the ATF16V8B-15PU?

Yes. The symbol is EasyEDA_Cloud:ATF16V8B-10-JC and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATF16V8B-15PU?

DIP-20, with 20 pins. Its footprint is drawn on this page.

Where is the ATF16V8B-15PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATF16V8B-15PU?

JLCPCB lists it as part C6509, with 783 in stock; the sellers' links on this page open their listings.

What can replace the ATF16V8B-15PU?

Parts like it in the library: the ATF16V8BQL-15PU by Microchip Technology, the ATF16V8C-7PU by Microchip Technology, the GAL16V8C-5LP by Lattice and the GAL16V8Z-12QP by Lattice. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATF16V8B-15PU?

6 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.