
ATECC608B-MAVDA-S
Microchip TechnologyExtended
-40℃~+100℃ 150nA 2V~5.5V I2C、1-Wire SHA-256、ECDSA、ECDH、HMAC、AES-128 UDFN-8(2x3) Security Verification / Encryption ICs ROHS
- Part id
- microchip/ATECC608B-MAVDA-S
- Category
- Security Verification, Encryption ICs
- Package
- UDFN-8(2x3)
- Pins
- 9
- In stock
- 238 at JLCPCB (C17350254)
- Used on
- 2 open-source boards
Overview
The ATECC608B-MAVDA-S is a security Verification, Encryption IC made by Microchip Technology in a UDFN-8(2x3) package with 9 pins. -40℃~+100℃ 150nA 2V~5.5V I2C、1-Wire SHA-256、ECDSA、ECDH、HMAC、AES-128 UDFN-8(2x3) Security Verification / Encryption ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SHA105-MAVDA-T, from EasyEDA) and its footprint (EasyEDA_Cloud:TDFN-8_L3.0-W2.0-P0.50-BL-EP1.6, from EasyEDA), ready for a KiCad board. 238 are in stock at JLCPCB (part C17350254). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
10- Supply, least
- 2 V · VCC, recommended operating min · p. 10
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 10
- Supply, absolute maximum
- 6 V · VCC, absolute max · p. 6
- Takes working
- 2 mA · typical, I/O transfers or non-ECC commands · p. 10
- Takes at most
- 14 mA · max, ECC command execution, clock divider = 0x0 · p. 10
- Takes asleep
- 30 nA · typical Sleep mode, VCC ≤ 3.6 V, TA ≤ +55°C, inputs near supply rails · p. 10
- Takes asleep
- 2 µA · max Sleep mode, full VCC and temperature range · p. 10
- A pin gives at most
- 5 mA · DC output current, absolute max · p. 6
- Junction to air (UDFN (MAH))
- 173 K/W · typical junction to ambient · p. 10
- Data rate, most
- 1 Mbit/s · I2C interface max · p. 4
What it is and has
15- Device type
- Cryptographic co-processor with secure hardware-based key storage · p. 1
- Protected storage
- Up to 16 keys, certificates or data · p. 1
- ECDSA
- FIPS186-3 Elliptic Curve Digital Signature · p. 1
- ECDH
- FIPS SP800-56A Elliptic Curve Diffie-Hellman · p. 1
- Elliptic curve
- NIST Standard P256 · p. 1
- Hash algorithms
- SHA-256 and HMAC, off-chip context save/restore · p. 1
- AES
- AES-128 encrypt/decrypt, Galois Field Multiply for GCM · p. 1
- Key derivation
- PRF/HKDF for TLS 1.2 and 1.3 · p. 1
- Secure boot
- Full ECDSA code signature validation, optional stored digest/signature · p. 1
- Random number generator
- Internal NIST SP 800-90A/B/C RNG · p. 1
- Monotonic counters
- 2 high-endurance counters · p. 1
- Serial number
- Unique 72-bit · p. 1
- Interface option
- High-speed Single Wire Interface with one GPIO pin · p. 1
- Interface option
- 1 MHz standard I2C · p. 1
- Package options
- 8-pad UDFN, 8-lead SOIC, 3-Lead Contact · p. 1
Specifications
58| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Operating Temperature | min -40 · max 100 °C | 6 | |
| Storage Temperature | min -65 · max 150 °C | 6 | |
| Maximum Operating Voltage | max 6 V | 6 | |
| DC Output Current | max 5 mA | 6 | |
| Voltage on any pin | Maximum: VCC + 0.5V | min -0.5 V | 6 |
| Human Body Model(HBM) ESD | >4kV | min 4 kV | 6 |
| Charge Device Model(CDM) ESD | >1kV | min 1 kV | 6 |
| Write Endurance at +85°C (Each Byte) | min 400000 Write Cycles | 6 | |
| Data Retention at +55°C | min 10 Years | 6 | |
| Data Retention at +35°C | min 30 · typ 50 Years | 6 | |
| Power-Up Delay(2) tPU | To Crypto Device; minimum time between VCC > VCC min prior to start of tWLO | min 100 us | 7 |
| Wake Low Duration tWLO | To Crypto Device | min 60 us | 7 |
| Wake High Delay to Data Comm tWHI | To Crypto Device; SDA stable high unless polling; SelfTest not enabled at power-up | min 1500 us | 7 |
| Wake High Delay when SelfTest is Enabled tWHIST | To Crypto Device; SDA stable high unless polling | min 20 ms | 7 |
| High-Side Glitch Filter at Active tHIGNORE_A | To Crypto Device; shorter pulses ignored when active; characterized, not production tested | min 45 ns | 7 |
| Low-Side Glitch Filter at Active tLIGNORE_A | To Crypto Device; shorter pulses ignored when active; characterized, not production tested | min 45 ns | 7 |
| Low-Side Glitch Filter at Sleep tLIGNORE_S | To Crypto Device; shorter pulses ignored in Sleep mode; characterized, not production tested | min 15 us | 7 |
| Watchdog Time-out tWATCHDOG | To Crypto Device; time from wake to forced Sleep if Config.ChipMode[2] is 0 | min 0.7 · typ 1.3 · max 1.7 s | 7 |
| Start Pulse Duration tSTART | To Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.1 · typ 4.34 · max 4.56 us | 8 |
| Start Pulse Duration tSTART | From Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.6 · typ 6 · max 8.6 us | 8 |
| Zero Transmission High Pulse tZHI | To Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.1 · typ 4.34 · max 4.56 us | 8 |
| Zero Transmission High Pulse tZHI | From Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.6 · typ 6 · max 8.6 us | 8 |
| Zero Transmission Low Pulse tZLO | To Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.1 · typ 4.34 · max 4.56 us | 8 |
| Zero Transmission Low Pulse tZLO | From Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 4.6 · typ 6 · max 8.6 us | 8 |
| Bit Time(1) tBIT | To Crypto Device; may enter Sleep if bit time exceeds tTIMEOUT; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 37 · typ 39 us | 8 |
| Bit Time(1) tBIT | From Crypto Device; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 41 · typ 54 · max 78 us | 8 |
| Turn Around Delay tTURNAROUND | From Crypto Device; measured from initial falling edge of start pulse of last transmit-flag bit; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 64 · typ 96 · max 131 us | 8 |
| Turn Around Delay tTURNAROUND | To Crypto Device; system wait after last transmitted bit, measured from falling edge of its start pulse; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 93 us | 8 |
| IO Timeout tTIMEOUT | To Crypto Device; inactive bus may cause Sleep; TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 100 pF | min 45 · typ 65 · max 85 ms | 8 |
| SCL Clock Frequency fSCL | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 0 · max 1 MHz | 9 |
| SCL High Time tHIGH | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 400 ns | 9 |
| SCL Low Time tLOW | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 400 ns | 9 |
| Start Setup Time tSU.STA | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 250 ns | 9 |
| Start Hold Time tHD.STA | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 250 ns | 9 |
| Stop Setup Time tSU.STO | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 250 ns | 9 |
| Data In Setup Time tSU.DAT | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 100 ns | 9 |
| Data In Hold Time tHD.DAT | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 0 ns | 9 |
| Input Rise Time1 tR | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF; characterized, not tested | max 300 ns | 9 |
| Input Fall Time1 tF | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF; characterized, not tested | max 100 ns | 9 |
| Clock Low to Data Out Valid tAA | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 50 · max 550 ns | 9 |
| Data Out Hold Time tDH | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 50 ns | 9 |
| SMBus Time-Out Delay tTIMEOUT | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF | min 25 · max 75 ms | 9 |
| Time bus must be free before a new transmission can start1 tBUF | TA = -40°C to +100°C, VCC = +2.0V to +5.5V, CL = 1 TTL Gate and 100 pF; characterized, not tested | min 500 ns | 9 |
| Ambient Operating Temperature TA | Standard Industrial Temperature Range | min -40 · max 85 °C | 10 |
| Ambient Operating Temperature TA | Extended Industrial Temperature Range | min -40 · max 100 °C | 10 |
| Power Supply Voltage VCC | min 2 · max 5.5 V | 10 | |
| Active Power Supply Current ICC | Waiting for I/O during I/O transfers or execution of non-ECC commands. Independent of Clock Divider value. | typ 2 · max 3 mA | 10 |
| Active Power Supply Current ICC | During ECC command execution. Clock divider = 0x0 | max 14 mA | 10 |
| Active Power Supply Current ICC | During ECC command execution. Clock divider = 0x5 | max 6 mA | 10 |
| Active Power Supply Current ICC | During ECC command execution. Clock divider = 0xD | max 3 mA | 10 |
| Idle Power Supply Current IIDLE | When device is in Idle mode, VSDA and VSCL < 0.4V or > VCC – 0.4 | typ 800 uA | 10 |
| Sleep Current ISLEEP | When device is in Sleep mode, VCC ≤ 3.6V, VSDA and VSCL < 0.4V or > VCC – 0.4, TA ≤ +55°C | typ 30 · max 150 nA | 10 |
| Sleep Current ISLEEP | When device is in Sleep mode. Over full VCC and temperature range. | max 2 uA | 10 |
| Output Low Voltage VOL | When device is in Active mode, VCC = 2.5 to 5.5V | max 0.4 V | 10 |
| Output Low Current IOL | When device is in Active mode, VCC = 2.5 to 5.5V, VOL = 0.4V | max 4 mA | 10 |
| Theta JA ƟJA | UDFN (MAH) | typ 173 °C/W | 10 |
| Input Low Voltage VIL | When device is active and TTLenable bit in Configuration memory is zero; otherwise, see above. | min -0.5 · max 0.5 V | 10 |
| Input High Voltage VIH | Maximum: VCC + 0.5 V. When device is active and TTLenable bit in Configuration memory is zero; otherwise, see above. | min 1.5 V | 10 |
Pins, by the datasheet
8- 1 NC
- No Connect. · p. 2
- 2 NC
- No Connect. · p. 2
- 3 NC
- No Connect. · p. 2
- 4 GND
- Ground. · p. 2
- 5 SDA
- Serial Data. · p. 2
- 6 SCL
- Serial Clock Input for I2C; GPIO for SWI. · p. 2
- 7 NC
- No Connect. · p. 2
- 8 VCC
- Power Supply. · p. 2
Open-source boards using it
2- 2 layers80 × 80 mm

- 4 layers50 × 160 mm

Sertest ng
eurovibes/sertest-ng
Serial interfaces like RS-232, RS-422/485 or CAN bus are even used in this modern times. While reworking the 8250 driver in the Linux kernel jogness faced plethora of nasty hardware dedication with modern serial…
156 partsCERN-OHL-S-2.0
Questions
Is there a KiCad symbol and footprint for the ATECC608B-MAVDA-S?
Yes. The symbol is EasyEDA_Cloud:SHA105-MAVDA-T and the footprint EasyEDA_Cloud:TDFN-8_L3.0-W2.0-P0.50-BL-EP1.6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ATECC608B-MAVDA-S?
UDFN-8(2x3), with 9 pins. Its footprint is drawn on this page.
Where is the ATECC608B-MAVDA-S datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the ATECC608B-MAVDA-S?
JLCPCB lists it as part C17350254, with 238 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ATECC608B-MAVDA-S?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.