AT93C46DN-SH-T

Microchip Technology

-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1Kbit 2MHz 5ms Built-in power-on reset (POR)、Built-in write enable latch (WEL) SPI SOIC-8 EEPROM ROHS

Extended

Datasheetmicrochip/AT93C46DN-SH-T

Category: EEPROM
Package: SOIC-8
Pins: 8

Overview

The AT93C46DN-SH-T is an EEPROM made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1Kbit 2MHz 5ms Built-in power-on reset (POR)、Built-in write enable latch (WEL) SPI SOIC-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (AT93C46DN-SH-T:AT93C46DN-SH-T, from Antmicro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 71,449 are in stock at JLCPCB (part C6499). 9 open-source boards in 9 repositories on GitHub use it.

Symbol

AT93C46DN-SH-T:AT93C46DN-SH-TFrom Antmicro

Footprint

Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

Supply, least: 1.8 V · VCC, recommended operating min · p. 8
Supply, most: 5.5 V · VCC, recommended operating max · p. 8
Supply, absolute maximum: 6.25 V · VCC, absolute max · p. 8
Works from: -40 °C · Ambient operating min · p. 9
Works up to: 85 °C · Ambient operating max · p. 9
Takes working: 500 µA · VCC read at 1 MHz, 5.0 V, typical · p. 8
Takes at most: 2 mA · VCC read at 1 MHz, 5.0 V, max · p. 8
Takes asleep: 400 nA · Standby at VCC = 1.8 V, CS = 0 V, typical · p. 8
Takes asleep: 6 µA · Standby at VCC = 2.7 V, CS = 0 V, typical · p. 8
Takes asleep: 10 µA · Standby at VCC = 5.0 V, CS = 0 V, typical · p. 8
A pin gives at most: 5 mA · DC output current, absolute max · p. 8

What it is and has

EEPROM capacity: 1-Kbit, 128 x 8 or 64 x 16 · p. 1
Memory organization: User-selectable 128 x 8 or 64 x 16 · p. 1
Interface: Three-Wire Serial · p. 1
Clock rate: 2 MHz at 5V · p. 1
Write cycle: Self-timed, 5 ms maximum · p. 1
Endurance: 1,000,000 write cycles · p. 1
Data retention: 100 years · p. 1
Package compliance: Lead-free/Halide-free/RoHS compliant · p. 1
Package options: 8-Lead PDIP, 8-Lead SOIC, 8-Lead TSSOP, 8-Pad UDFN, 8-Ball VFBGA · p. 1

Specifications

Parameter	Conditions	As printed	Page
Temperature under bias		min -55 · max 125 °C	8
Storage temperature		min -65 · max 150 °C	8
VCC		max 6.25 V	8
Voltage on any pin with respect to ground		min -1 · max 7 V	8
DC output current		max 5 mA	8
ESD protection		max 2 kV	8
Operating Temperature (Case)	Industrial Temperature Range	min -40 · max 85 °C	8
VCC Power Supply	Low-Voltage Grade	min 1.8 · max 5.5 V	8
Supply Voltage VCC1		min 1.8 · max 5.5 V	8
Supply Voltage VCC2		min 2.7 · max 5.5 V	8
Supply Voltage VCC3		min 4.5 · max 5.5 V	8
Supply Current ICC1	VCC = 5.0V, Read at 1 MHz	typ 0.5 · max 2 mA	8
Supply Current ICC2	VCC = 5.0V, Write at 1 MHz	typ 0.5 · max 2 mA	8
Standby Current (1.8V Option) ISB1	VCC = 1.8V, CS = 0V	typ 0.4 · max 1 uA	8
Standby Current (2.7V Option) ISB2	VCC = 2.7V, CS = 0V	typ 6 · max 10 uA	8
Standby Current (5.0V Option) ISB3	VCC = 5.0V, CS = 0V	typ 10 · max 15 uA	8
Input Leakage Current IIL	VIN = 0 to VCC	typ 0.1 · max 1 uA	8
Output Leakage Current ILO	VIN = 0 to VCC	typ 0.1 · max 1 uA	8
Input Low‑Voltage VIL1	2.7V ≤ VCC ≤ 5.5V (Note 2)	min -0.6 · max 0.8 V	9
Input High‑Voltage VIH1	2.7V ≤ VCC ≤ 5.5V (Note 2)	min 2 V	9
Input Low‑Voltage VIL2	1.8V ≤ VCC ≤ 2.7V (Note 2)	min -0.6 V	9
Output Low‑Voltage VOL1	2.7V ≤ VCC ≤ 5.5V, IOL = 2.1 mA	max 0.4 V	9
Output High‑Voltage VOH1	2.7V ≤ VCC ≤ 5.5V, IOH = -0.4 mA	min 2.4 V	9
Output Low‑Voltage VOL2	1.8V ≤ VCC ≤ 2.7V, IOL = 0.15 mA	max 0.2 V	9
Clock Frequency, SK fSK	4.5V ≤ VCC ≤ 5.5V	min 0 · max 2 MHz	9
Clock Frequency, SK fSK	2.7V ≤ VCC ≤ 5.5V	min 0 · max 1 MHz	9
Clock Frequency, SK fSK	1.8V ≤ VCC ≤ 5.5V	min 0 · max 250 kHz	9
High Time, SK tSKH	2.7V ≤ VCC ≤ 5.5V	min 250 ns	9
High Time, SK tSKH	1.8V ≤ VCC ≤ 5.5V	min 1000 ns	9
Low Time, SK tSKL	2.7V ≤ VCC ≤ 5.5V	min 250 ns	9
Low Time, SK tSKL	1.8V ≤ VCC ≤ 5.5V	min 1000 ns	9
Minimum CS Low Time tCS	2.7V ≤ VCC ≤ 5.5V	min 250 ns	9
Minimum CS Low Time tCS	1.8V ≤ VCC ≤ 5.5V	min 1000 ns	9
CS Setup Time tCSS	2.7V ≤ VCC ≤ 5.5V, Relative to SK	min 50 ns	9
CS Setup Time tCSS	1.8V ≤ VCC ≤ 5.5V, Relative to SK	min 200 ns	9
DI Setup Time tDIS	2.7V ≤ VCC ≤ 5.5V, Relative to SK	min 100 ns	9
DI Setup Time tDIS	1.8V ≤ VCC ≤ 5.5V, Relative to SK	min 400 ns	9
CS Hold Time tCSH	Relative to SK	min 0 ns	9
DI Hold Time tDIH	2.7V ≤ VCC ≤ 5.5V, Relative to SK	min 100 ns	10
DI Hold Time tDIH	1.8V ≤ VCC ≤ 5.5V, Relative to SK	min 400 ns	10
Output Delay to 1 tPD1	2.7V ≤ VCC ≤ 5.5V	max 250 ns	10
Output Delay to 1 tPD1	1.8V ≤ VCC ≤ 5.5V	max 1000 ns	10
Output Delay to 0 tPD0	2.7V ≤ VCC ≤ 5.5V	max 250 ns	10
Output Delay to 0 tPD0	1.8V ≤ VCC ≤ 5.5V	max 1000 ns	10
CS to Status Valid tSV	2.7V ≤ VCC ≤ 5.5V	max 250 ns	10
CS to Status Valid tSV	1.8V ≤ VCC ≤ 5.5V	max 1000 ns	10
CS to DO in High‑Impedance tDF	4.5V ≤ VCC ≤ 5.5V, CS = VIL	max 100 ns	10
CS to DO in High‑Impedance tDF	2.7V ≤ VCC ≤ 5.5V, CS = VIL, AT93C46D	max 250 ns	10
CS to DO in High‑Impedance tDF	1.8V ≤ VCC ≤ 5.5V, CS = VIL	max 400 ns	10
Write Cycle Time tWP	1.8V ≤ VCC ≤ 5.5V	min 0.1 · typ 3 · max 5 ms	10
Time required after VCC is stable before the device can accept commands tPUP		min 100 us	11
Power-on Reset Threshold Voltage VPOR		max 1.5 V	11
Minimum time at VCC = 0V between power cycles tPOFF		min 500 ms	11
Output Capacitance (DO) COUT	VOUT = 0V	max 5 pF	11
Input Capacitance (CS, SK, DI, ORG) CIN	VIN = 0V	max 5 pF	11
Data Retention	TA = 55°C	min 100 Years	11

Pins, by the datasheet

1 CS: Chip Select; high selects the device. · p. 5
2 SK: Serial Data Clock; input data is latched and output data is clocked on its rising edge. · p. 5
3 DI: Serial Data Input for instructions, addresses and data. · p. 5
4 DO: Serial Data Output; also provides Ready/Busy status after an erase or write operation. · p. 5
5 GND: Ground reference; connect to system ground. · p. 5
6 ORG: Internal Organization selection: connect to VCC for x16 or GND for x8; an unloaded floating pin selects x16 through the internal pull-up. · p. 6
7 NC: No Connect. · p. 5
8 VCC: Device Power Supply. · p. 5

Ordering codes, by the datasheet

AT93C46DN-SH-B: SOIC · User-selectable organization; industrial temperature range; bulk (tubes) · p. 33
AT93C46EN-SH-T: SOIC · Fixed 16 X 64 organization; industrial temperature range; tape and reel · p. 33
AT93C46E-TH-B: TSSOP · Fixed 16 X 64 organization; industrial temperature range; bulk (tubes) · p. 33
AT93C46D-TH-T: TSSOP · User-selectable organization; industrial temperature range; tape and reel · p. 33
AT93C46DY6-YH-T: UDFN · User-selectable organization; industrial temperature range; tape and reel · p. 33
AT93C46DY6-YH-E: UDFN · User-selectable organization; industrial temperature range; extended quantity tape and reel · p. 33
AT93C46E-PU: PDIP · Fixed 16 X 64 organization; industrial temperature range; bulk (tubes) · p. 33
AT93C46DU3-UU-T: VFBGA · User-selectable organization; industrial temperature range; tape and reel · p. 33

Parameters

Clock Frequency: 2MHz
Current - Supply: 500uA
Data Retention - TDR (Year): 100 years
Features: Built-in power-on reset (POR)
Interface: SPI
Memory Size: 1Kbit
Operating Current: 2mA
Operating Temperature: -40℃~+85℃
Output Current per Pin(Max): 5mA
Standby Current: 10uA
Voltage - Supply: 1.8V~5.5V
Voltage - Supply(Absolute Max): 6.25V
Write Cycle Endurance: 1,000,000 cycles
Write Cycle Time(Tw): 5ms

Order codes

AT93C46DN-SH-TLCSC C6499

Pinout

The pins of the AT93C46DN-SH-T
Pin	Name	Type
1	CS	Passive
2	SK	Passive
3	DI	Passive
4	DO	Passive
5	GND	Power in
6	ORG	Passive
7	NC	Not connected
8	VCC	Power in

Open-source boards using it

All 9

2 layers157.4 × 74.2 mm
ISA8019
Manawyrm/ISA8019
RTL8019-based ISA network card, NE2000-compatible
56 parts129GPL-3.0
8 layers125 × 80 mm
SONATA ONE
newaetech/sonata-pcb
Design files and associated documentation for Sonata PCB, part of the Sunburst Project
470 parts22Apache-2.0
4 layers73.4 × 72.7 mm
Awatch2
jwise/aWatch2-hw
hardware for aWatch2
177 parts18
4 layers130 × 90 mm
FrequnecyCounter
LUMERIIX/FrequencyCounter
FPGA based frequnecy counter hard- and software repository
129 parts6
2 layers50 × 31 mm
USB SPII2CK
mikef5410/USB_SPII2CK
USB to SPI and I2C
46 parts
2 layers103.8 × 50.9 mm
FINAL final
PavitpalSingh2004/TRUESENSE_V2
TrueSense V2 is a compact high-speed reflection spectrometer using the Hamamatsu C12880MA, ESP32-S3, custom PCBs, high-speed ADC acquisition, FT2232H USB, Wi-Fi/UDP streaming, and a PyQt6 GUI for real-time spectrum…
113 parts
4 layers60 × 74 mm
Namiashi
takarakasai/misa-usb-rs485-hub
4ch isolated USB-to-RS-485 hub board for humanoid robot motor control. FT4232HL + 2× ADM2582E + 2× CA-IS3098W, 5kV isolation, 920kbps-12Mbps, KiCad 10 / JLCPCB manufactured / verified working.
109 parts
2 layers83.2 × 57.8 mm
Ft4232h breakout
TomKeddie/prj-pcb-experiments

73 parts4BSD-2-Clause

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/microchip/AT93C46DN-SH-T" title="AT93C46DN-SH-T in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/microchip/AT93C46DN-SH-T.jpg" alt="AT93C46DN-SH-T" width="1200" height="900">

A picture that opens the part, for a README

[![AT93C46DN-SH-T](https://pcbkit.io/embed/parts/microchip/AT93C46DN-SH-T.jpg?size=s)](https://pcbkit.io/parts/microchip/AT93C46DN-SH-T)

Questions

Is there a KiCad symbol and footprint for the AT93C46DN-SH-T?

Yes. The symbol is AT93C46DN-SH-T:AT93C46DN-SH-T and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AT93C46DN-SH-T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the AT93C46DN-SH-T datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the AT93C46DN-SH-T?

JLCPCB lists it as part C6499, with 71,449 in stock; the sellers' links on this page open their listings.

What can replace the AT93C46DN-SH-T?

Parts like it in the library: the AT93C66B-SSHM-T by Microchip Technology, the M93C66-WMN6TP by STMicroelectronics, the 93LC46BT-I/SN by Microchip Technology and the 93LC56B-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AT93C46DN-SH-T?

9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

AT93C46DN-SH-T

Overview

Symbol

Footprint

From the datasheet

What it is and has

Specifications

Pins, by the datasheet

Ordering codes, by the datasheet

Parameters

Order codes

Pinout

Open-source boards using it

ISA8019

SONATA ONE

Awatch2

FrequnecyCounter

USB SPII2CK

FINAL final

Namiashi

Ft4232h breakout

Show this part on your page

Questions

Is there a KiCad symbol and footprint for the AT93C46DN-SH-T?

What package is the AT93C46DN-SH-T?

Where is the AT93C46DN-SH-T datasheet?

Where can I order the AT93C46DN-SH-T?

What can replace the AT93C46DN-SH-T?

Which open-source boards use the AT93C46DN-SH-T?

Parts like it

AT93C66B-SSHM-T

M93C66-WMN6TP

93LC46BT-I/SN

93LC56B-I/SN

93LC66AT/SN

AT93C56B-SSHM-T

AT93C86A-10SU-2.7-T

M93C46-WMN6TP