

LPC1768
MBED
Rapid prototyping for the LPC1768 MCU
- Category
- Uncategorised
- Pins
- 40
Overview
The LPC1768 is an uncategorised made by MBED with 40 pins. Rapid prototyping for the LPC1768 MCU.
PCBKit's library has its KiCad symbol (PCB Modules:PCBM_MBED_LPC1768, from CERN's library) and its footprint (PCB Modules:PCBM_MBED_LPC1768, from CERN's library), ready for a KiCad board. 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
Pinout
40| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | VIN | Input |
| 3 | VBAT | Input |
| 4 | RESET | Input |
| 5 | P0.9/I2STX_SDA/MOSI1/MAT2.3 | Input/output |
| 6 | P0.8/I2STX_WS/MISO1/MAT2.2 | Input/output |
| 7 | P0.7/I2STX_CLK/SCK1/MAT2.1 | Input/output |
| 8 | P0.6/I2SRX_SDA/SSEL1/MAT2.0 | Input/output |
| 9 | P0.0/CAN_RX1/TXD3/SDA1 | Input/output |
| 10 | P0.1/CAN_TX1/RXD3/SCL1 | Input/output |
| 11 | P0.18/DCD1/MOSI0/MOSI | Input/output |
| 12 | P0.17/CTS1/MISO0/MISO | Input/output |
| 13 | P0.15/TXD1/SCK0/SCK | Input/output |
| 14 | P0.16/RXD1/SSEL0/SSEL | Input/output |
| 15 | P0.23/AD0.0/I2SRX_CLK/CAP3.0 | Input/output |
| 16 | P0.24/AD0.1/I2SRX_WS/CAP3.1 | Input/output |
| 17 | P0.25/AD0.2/I2SRX_SDA/TXD3 | Input/output |
| 18 | P0.26/AD0.3/AOUT/RXD3 | Input/output |
| 19 | P1.30/VBUS/AD0.4 | Input/output |
| 20 | P1.31/SCK1/AD0.5 | Input/output |
| 21 | P2.5/PWM1.6/DTR1/TRACEDATA0 | Input/output |
| 22 | P2.4/PWM1.5/DSR1/TRACEDATA1 | Input/output |
| 23 | P2.3/PWM1.4/DCD1/TRACEDATA2 | Input/output |
| 24 | P2.2/PWM1.3/CTS1/TRACEDATA3 | Input/output |
| 25 | P2.1/PWM1.2/RXD1 | Input/output |
| 26 | P2.0/PWM1.1/TXD1 | Input/output |
| 27 | P0.11/RXD2/SCL2/MAT3.1 | Input/output |
| 28 | P0.10/TXD2/SDA2/MAT3.0 | Input/output |
| 29 | P0.5/I2SRX_WS/CAN_TX2/CAP2.1 | Input/output |
| 30 | P0.4/I2SRX_CLK/CAN_RX2/CAP2.0 | Input/output |
| 31 | P0.29/USB_D+ | Input/output |
| 32 | P0.30/USB_D- | Input/output |
| 33 | ENET_TD+ | Output |
| 34 | ENET_TD- | Output |
| 35 | ENET_RD+ | Input |
| 36 | ENET_RD- | Input |
| 37 | IF_D+ | Input/output |
| 38 | IF_D- | Input/output |
| 39 | VBUS | Power in |
| 40 | VOUT | Power in |
Open-source boards using it
All 3- 2 layers107.9 × 64.8 mm

- 2 layers75 × 49.3 mm

- 2 layers75 × 86 mm

Triforce control
TeamTriforceUK/triforce-control-pcb
An open source KiCAD PCB design for the Triforce Fight Controller.
20 parts
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/mbed/LPC1768" title="LPC1768 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/mbed/LPC1768.jpg" alt="LPC1768" width="1200" height="900">[](https://pcbkit.io/parts/mbed/LPC1768)Questions
Is there a KiCad symbol and footprint for the LPC1768?
Yes. The symbol is PCB Modules:PCBM_MBED_LPC1768 and the footprint PCB Modules:PCBM_MBED_LPC1768, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the LPC1768?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.