4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
149 partsCERN-OHL-P-2.0
XR88C92CJ-F
MaxLinearExtended
0℃~+70℃ 2 2.97V~5.5V 230.4Kbps 8Byte、16Byte Internal Oscillator、With automatic flow control、Configurable GPIO UART PLCC-44(16.59x16.59) UART ROHS
- Part id
- maxlinear/XR88C92CJ-F
- Category
- UART
- Package
- PLCC-44(16.59x16.59)
- Pins
- 2
- In stock
- 0 at JLCPCB (C1523609)
- Used on
- 5 open-source boards
Overview
The XR88C92CJ-F is an UART made by MaxLinear in a PLCC-44(16.59x16.59) package with 44 pins. 0℃~+70℃ 2 2.97V~5.5V 230.4Kbps 8Byte、16Byte Internal Oscillator、With automatic flow control、Configurable GPIO UART PLCC-44(16.59x16.59) UART ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:XR88C192CJTR-F, from EasyEDA) and its footprint (EasyEDA_Cloud:PLCC-44_L16.6-W16.6-P1.27-LS17.5-T, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1523609). 5 open-source boards in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
44| Pin | Name | Type |
|---|---|---|
| 1 | N.C. | Unspecified |
| 2 | A0 | Unspecified |
| 3 | IP3 | Unspecified |
| 4 | A1 | Unspecified |
| 5 | IP1 | Unspecified |
| 6 | A2 | Unspecified |
| 7 | A3 | Unspecified |
| 8 | IP0 | Unspecified |
| 9 | -IOW | Unspecified |
| 10 | -IOR | Unspecified |
| 11 | RXB | Unspecified |
| 12 | N.C. | Unspecified |
| 13 | TXB | Unspecified |
| 14 | OP1 | Unspecified |
| 15 | OP3 | Unspecified |
| 16 | OP5 | Unspecified |
| 17 | OP7 | Unspecified |
| 18 | D1 | Unspecified |
| 19 | D3 | Unspecified |
| 20 | D5 | Unspecified |
| 21 | D7 | Unspecified |
| 22 | GND | Unspecified |
| 23 | N.C | Unspecified |
| 24 | -INT | Unspecified |
| 25 | D6 | Unspecified |
| 26 | D4 | Unspecified |
| 27 | D2 | Unspecified |
| 28 | D0 | Unspecified |
| 29 | OP6 | Unspecified |
| 30 | OP4 | Unspecified |
| 31 | OP2 | Unspecified |
| 32 | OP0 | Unspecified |
| 33 | TXA | Unspecified |
| 34 | N.C | Unspecified |
| 35 | RXA | Unspecified |
| 36 | XTAL1 | Unspecified |
| 37 | XTAL2 | Unspecified |
| 38 | RESET | Unspecified |
| 39 | -CS | Unspecified |
| 40 | IP2 | Unspecified |
| 41 | IP6 | Unspecified |
| 42 | IP5 | Unspecified |
| 43 | IP4 | Unspecified |
| 44 | VCC | Unspecified |
Open-source boards using it
5- 4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
108 partsCERN-OHL-P-2.0 - 4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
135 partsCERN-OHL-P-2.0 - 4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
134 partsCERN-OHL-P-2.0 - 4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
128 partsCERN-OHL-P-2.0
Parts like it
8
ST16C2550IJ44-F
PLCC-44(16.59x16.59)16Byte 2 2.97V~5.5V 4Mbps RS-485、RS-232 Timer/Counter、Internal Oscillator、With False Start Bit Detection、with Modem Control PLCC-44(16.59x16.59) UART ROHSMaxLinearUARTST16C550CJ44-F
PLCC-44(16.59x16.59)0℃~+70℃ 1 1.2mA 1.5Mbps 16Byte 2.97V~5.5V Timer/Counter、With False Start Bit Detection、with Modem Control UART PLCC-44(16.59x16.59) UART ROHSMaxLinearUARTST16C550CJ44TR-F
PLCC-44(16.59x16.59)-40℃~+85℃ 1 1.2mA 1.5Mbps 16Byte 2.97V~5.5V Timer/Counter、With False Start Bit Detection、with Modem Control UART PLCC-44(16.59x16.59) UART ROHSMaxLinearUARTST16C550IJ44-F
PLCC-44(16.6x16.6)1 16Byte 2.97V~5.5V Timer/Counter、With False Start Bit Detection、with Modem Control PLCC-44(16.6x16.6) UART ROHSMaxLinearUARTXR16C2850CJTR-F
PLCC-44(16.59x16.59)128Byte 2 2.97V~5.5V 6.25Mbps RS-485、RS-232 Timer/Counter、Internal Oscillator、With False Start Bit Detection、with Modem Control、With automatic flow control、With IrDA Encoder/Decoder PLCC-44(16.59x16.59) UART ROHSMaxLinearUARTXR16C2852CJ-F
PLCC-44(16.6x16.6)128Byte 2 2.97V~5.5V Low-power mode、Hardware flow control support、Software flow control support、Internal loopback/self-test mode、Automatic RS-485 direction control PLCC-44(16.6x16.6) UART ROHSMaxLinearUARTXR16C2852IJ-F
PLCC-44(16.59x16.59)128Byte 2 2.97V~5.5V 3.125Mbps Internal Oscillator、With False Start Bit Detection、with Modem Control、With automatic flow control、With IrDA Encoder/Decoder、Hardware flow control support、Software flow control support、Fractional baud rate generator、Internal loopback/self-test mode、Automatic RS-485 direction control PLCC-44(16.59x16.59) UART ROHSMaxLinearUARTXR16C850CJ-F
PLCC-44(16.59x16.59)1 128Byte 2.97V~5.5V 2Mbps Printer Port、Timer/Counter、Internal Oscillator、With False Start Bit Detection、with Modem Control、With automatic flow control、With IrDA Encoder/Decoder、Hardware flow control support、Software flow control support、Automatic RS-485 direction control PLCC-44(16.59x16.59) UART ROHSMaxLinearUART
Questions
Is there a KiCad symbol and footprint for the XR88C92CJ-F?
Yes. The symbol is EasyEDA_Cloud:XR88C192CJTR-F and the footprint EasyEDA_Cloud:PLCC-44_L16.6-W16.6-P1.27-LS17.5-T, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the XR88C92CJ-F?
PLCC-44(16.59x16.59), with 44 pins. Its footprint is drawn on this page.
Where is the XR88C92CJ-F datasheet?
MaxLinear publishes it: the Datasheet link on this page opens it.
Where can I order the XR88C92CJ-F?
JLCPCB lists it as part C1523609, with 0 in stock; the sellers' links on this page open their listings.
What can replace the XR88C92CJ-F?
Parts like it in the library: the ST16C2550IJ44-F by MaxLinear, the ST16C550CJ44-F by MaxLinear, the ST16C550CJ44TR-F by MaxLinear and the ST16C550IJ44-F by MaxLinear. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the XR88C92CJ-F?
5 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.