2 layers144.8 × 204.5 mm
SP485REP
MaxLinearExtended
DIP-8-300mil RS-485 / RS-422 ICs ROHS
- Part id
- maxlinear/SP485REP
- Category
- RS 485, RS 422 ICs
- Package
- DIP-8-300mil
- Pins
- 8
- In stock
- 0 at JLCPCB (C17243)
- Used on
- 1 open-source board
Overview
The SP485REP is a RS 485, RS 422 IC made by MaxLinear in a DIP-8-300mil package with 8 pins. DIP-8-300mil RS-485 / RS-422 ICs ROHS.
PCBKit's library has its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C17243). 1 open-source board in 1 repository on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
Open-source boards using it
1Parts like it
8
LT1785AIN8#PBF
PDIP-8-40℃~+85℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485 / RS-422 ICsSN75176AP
PDIP-80℃~+70℃ 1 1 4.75V~5.25V 40mA 5Mbps Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsSN75LBC176P
PDIP-80℃~+70℃ 1 1 1mA 30Mbps 4.75V~5.25V Enable shutdown、Overcurrent Protection、Thermal shutdown protection、Tx/Rx enable Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsUA9638CP
DIP-80 0℃~+70℃ 2 4.75V~5.25V Driver DIP-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICsLT1785ACN8#PBF
PDIP-80℃~+70℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485 / RS-422 ICsLT1785AHN8#PBF
PDIP-8-40℃~+125℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485 / RS-422 ICsLT1785CN8#PBF
DIP-80℃~+70℃ 1 1 128 250Kbps 5V 9mA Half-Duplex Transceiver DIP-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485 / RS-422 ICsLT1785HN8#PBF
PDIP-8-40℃~+125℃ 1 1 250Kbps 4.75V~5.25V Transceiver PDIP-8 RS-485 / RS-422 ICs ROHSAnalog DevicesRS-485 / RS-422 ICs
Questions
Is there a KiCad symbol and footprint for the SP485REP?
Yes. the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SP485REP?
DIP-8-300mil, with 8 pins. Its footprint is drawn on this page.
Where can I order the SP485REP?
JLCPCB lists it as part C17243, with 0 in stock; the sellers' links on this page open their listings.
What can replace the SP485REP?
Parts like it in the library: the LT1785AIN8#PBF by Analog Devices, the SN75176AP by Texas Instruments, the SN75LBC176P by Texas Instruments and the UA9638CP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SP485REP?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.