MAX691EPE
Maxim Integrated (Analog Devices)Extended
-40℃~+85℃@(TA) 1 4.65V 4.75V~5.5V 50ms Active Low Push-pull Voltage monitor Watchdog timer PDIP-16 Supervisor and Reset ICs
- Part id
- maxim/MAX691EPE
- Category
- Supervisor And Reset ICs
- Package
- PDIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C3685605)
Overview
The MAX691EPE is a supervisor And Reset IC made by Maxim Integrated (Analog Devices) in a PDIP-16 package with 16 pins. -40℃~+85℃@(TA) 1 4.65V 4.75V~5.5V 50ms Active Low Push-pull Voltage monitor Watchdog timer PDIP-16 Supervisor and Reset ICs.
PCBKit's library has its KiCad symbol (Power_Supervisor:MAX691xPE, from KiCad's library) and its footprint (Package_DIP:DIP-16_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3685605).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | VBATT | Power in |
| 2 | VOUT | Power out |
| 3 | VCC | Power in |
| 4 | GND | Power in |
| 5 | BATT_ON | Output |
| 6 | LOW_LINE | Output |
| 7 | OSC_IN | Input |
| 8 | OSC_SEL | Input |
| 9 | PFI | Input |
| 10 | PFO | Output |
| 11 | WDI | Input |
| 12 | CE_OUT | Output |
| 13 | CE_IN | Input |
| 14 | WDO | Output |
| 15 | RESET | Output |
| 16 | RESET | Output |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the MAX691EPE?
Yes. The symbol is Power_Supervisor:MAX691xPE and the footprint Package_DIP:DIP-16_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MAX691EPE?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the MAX691EPE datasheet?
Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.
Where can I order the MAX691EPE?
JLCPCB lists it as part C3685605, with 0 in stock; the sellers' links on this page open their listings.
What can replace the MAX691EPE?
Parts like it in the library: the MAX691CPE+ by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.