Skip to the content
1234111213141516171825262728

MAX3535ECWI+T

Maxim Integrated (Analog Devices)Extended

0℃~+70℃ 1Mbps Failure protection circuit、Status indication、Bus fault detection SOIC-28-300mil Isolated RS-485/422 Transceivers ROHS

Part id
maxim/MAX3535ECWI+T
Category
Isolated RS 485, 422 Transceivers
Package
SOIC-28-300mil
Pins
16
In stock
0 at JLCPCB (C2671563)
Used on
3 open-source boards

Overview

The MAX3535ECWI+T is an isolated RS 485, 422 Transceiver made by Maxim Integrated (Analog Devices) in a SOIC-28-300mil package with 16 pins. 0℃~+70℃ 1Mbps Failure protection circuit、Status indication、Bus fault detection SOIC-28-300mil Isolated RS-485/422 Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MAX3535ECWI+T, from EasyEDA) and its footprint (EasyEDA_Cloud:SOIC-28_P16-L17.9-W7.5-P1.27-LS10.3-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2671563). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

1VCC12ST13ST24GND111GND212Z13Y14VCC215B16A17R0218SL0#25DI26DE27RE#28R01
EasyEDA_Cloud:MAX3535ECWI+TFrom EasyEDA

Footprint

1234111213141516171825262728
EasyEDA_Cloud:SOIC-28_P16-L17.9-W7.5-P1.27-LS10.3-BLFrom EasyEDA

Pinout

16
The pins of the MAX3535ECWI+T
PinNameType
1VCC1Unspecified
2ST1Unspecified
3ST2Unspecified
4GND1Unspecified
11GND2Unspecified
12ZUnspecified
13YUnspecified
14VCC2Unspecified
15BUnspecified
16AUnspecified
17R02Unspecified
18SL0#Unspecified
25DIUnspecified
26DEUnspecified
27RE#Unspecified
28R01Unspecified

Open-source boards using it

3
  • 4 layers140 × 100 mmRecline actuator controller, the printed circuit board in 3D

    Recline actuator controller

    Accessibilita/recline-controls

    Hardware project for open source wheel chair recline control electronics

    181 partsCERN-OHL-S-2.0
  • 4 layers65 × 56 mmUSB HID Module Hat, the printed circuit board in 3D

    USB HID Module Hat

    Accessibilita/USB-HID-Module-Hat

    Raspberry Pi Hat that adds RS485 communication to Raspberry Pi 5 for interfacting with USB and Bluetooth HID Devices

    34 partsCERN-OHL-S-2.0
  • 4 layers109 × 84 mmRecline controls, the printed circuit board in 3D

    Recline controls

    Accessibilita/recline-controls

    Hardware project for open source wheel chair recline control electronics

    86 partsCERN-OHL-S-2.0

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the MAX3535ECWI+T?

Yes. The symbol is EasyEDA_Cloud:MAX3535ECWI+T and the footprint EasyEDA_Cloud:SOIC-28_P16-L17.9-W7.5-P1.27-LS10.3-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX3535ECWI+T?

SOIC-28-300mil, with 16 pins. Its footprint is drawn on this page.

Where is the MAX3535ECWI+T datasheet?

Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.

Where can I order the MAX3535ECWI+T?

JLCPCB lists it as part C2671563, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MAX3535ECWI+T?

Parts like it in the library: the MXL1535EEWI+T by Maxim Integrated (Analog Devices), the MAX3535EEWI+ by Maxim Integrated (Analog Devices), the MAX3535EEWI+T by Maxim Integrated (Analog Devices) and the MXL1535ECWI+ by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX3535ECWI+T?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.