MAX3013EUP
Maxim Integrated (Analog Devices)
+1.2V to +3.6V, 0.1uA, 100Mbps, 8-channel Level Translators
- Part id
- maxim/MAX3013EUP
- Category
- Uncategorised
- Package
- TSSOP20
- Pins
- 20
Overview
The MAX3013EUP is an uncategorised made by Maxim Integrated (Analog Devices) in a TSSOP20 package with 20 pins. +1.2V to +3.6V, 0.1uA, 100Mbps, 8-channel Level Translators.
PCBKit's library has its KiCad symbol (Analog & Interface:MAX3013EUP, from CERN's library) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board.
Symbol
The library has no symbol for this part yet.
Footprint
The library has no footprint for this part yet.
Parts like it
8HCT6701
TSSOP-20TSSOP-20 Analog to Digital Converters (ADC) ROHSHCTmicroUncategorisedRJM8L151SF6P6R
TSSOP-20(6.5x4.4)UncategorisedRunjetADS130B04QPWRQ1
TSSOP-20-40℃~+125℃ 10LSB 16 2.7V~3.6V 32kHz 4 6.8mA 8.192MHz Built-in Built-in Power-on reset、Integrated modulator、Simultaneous sampling、Built-in digital filter SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHSTexas InstrumentsUncategorisedZJC2676-16AUPBR
TSSOP-20TSSOP-20 Digital to Analog Converters (DAC) ROHSZJWUncategorisedMCP3462R-E/ST
TSSOP-20TSSOP-20 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyUncategorisedCS5247
TSSOP-20-40℃~+105℃ 1uA 2.4576MHz 2.8V~5.5V 24 3.125Hz 4 Auto calibration、Built-in temperature sensor、Multiplexers、Input buffer、Power-on reset、Integrated modulator、Under-voltage detection、Soft reset、Synchronous triggering、Built-in digital filter Built-in External、Built-in SPI Sigma-Delta Support Yes TSSOP-20 Analog to Digital Converters (ADC) ROHSCooperationUncategorisedAD5330BRUZ
TSSOP-20-40℃~+105℃ 0.25LSB 1 2.5V~5.5V 6us 8 Integrated buffer、Power-on reset、Power-down mode、Multi-chip synchronization、Programmable gain Parallel Voltage Buffer TSSOP-20 Digital to Analog Converters (DAC) ROHSAnalog DevicesUncategorisedAD5676RBRUZ
TSSOP-20-40℃~+125℃ 1.8mA 16 2.7V~5.5V 3LSB 5us 8 SPI Voltage Buffer TSSOP-20 Digital to Analog Converters (DAC) ROHSAnalog DevicesUncategorised
Questions
Is there a KiCad symbol and footprint for the MAX3013EUP?
Yes. The symbol is Analog & Interface:MAX3013EUP and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MAX3013EUP?
TSSOP20, with 20 pins. Its footprint is drawn on this page.
What can replace the MAX3013EUP?
Parts like it in the library: the HCT6701 by HCTmicro, the RJM8L151SF6P6R by Runjet, the ADS130B04QPWRQ1 by Texas Instruments and the ZJC2676-16AUPBR by ZJW. Check their datasheets: a part that fits the footprint may still differ in its ratings.