
Power supply
Hardware7253/OperationUrd
A nixie tube clock inspired by the divergence meter from Steins;Gate.
Maxim Integrated (Analog Devices)Extended
-40℃~+85℃@(TA) 1 2A 300kHz 3V~16.5V Adjustable Boost Boost External No SO-8 DC-DC Converters ROHS
The MAX1771ESA+T is a DC DC Converter made by Maxim Integrated (Analog Devices) in a SO-8 package with 8 pins. -40℃~+85℃@(TA) 1 2A 300kHz 3V~16.5V Adjustable Boost Boost External No SO-8 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:MAX1771xSA, from KiCad's library) and its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,300 are in stock at JLCPCB (part C407903). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| V+ to GND | Supply Voltage | min -0.3 · max 17 V | 2 |
| EXT, CS, REF, SHDN, FB to GND | Maximum: (V+ + 0.3V) | min -0.3 V | 2 |
| GND to AGND | min -0.1 · max 0.1 V | 2 | |
| Continuous Power Dissipation | SO, TA = +70°C; derate 5.88mW/°C above +70°C | max 471 mW | 2 |
| Operating Temperature Ranges | MAX1771E_ A | min -40 · max 85 °C | 2 |
| Junction Temperatures | MAX1771C_ A/E_ A | max 150 °C | 2 |
| Storage Temperature Range | min -65 · max 160 °C | 2 | |
| Lead Temperature | soldering, 10sec | max 300 °C | 2 |
| Input Voltage Range | MAX1771 (internal feedback resistors) | min 2 · max 12.5 V | 2 |
| Input Voltage Range | MAX1771C/E (external resistors) | min 3 · max 16.5 V | 2 |
| Minimum Start-Up Voltage | typ 1.8 · max 2 V | 2 | |
| Supply Current | V+ = 16.5V, SHDN = 0V (normal operation) | typ 85 · max 110 uA | 2 |
| Standby Current | V+ = 10V, SHDN ≥ 1.6V (shutdown) | typ 2 · max 5 uA | 2 |
| Standby Current | V+ = 16.5V, SHDN ≥ 1.6V (shutdown) | typ 4 uA | 2 |
| Output Voltage (Note 1) | V+ = 2V to 12V, over full load range, Circuit of Figure 2a | min 11.52 · typ 12 · max 12.48 V | 2 |
| Output Voltage Line Regulation (Note 2) | V+ = 5V to 7V, VOUT = 12V, ILOAD = 700mA, Circuit of Figure 2a | typ 5 mV/V | 2 |
| Output Voltage Load Regulation (Note 2) | V+ = 6V, VOUT = 12V, ILOAD = 0mA to 500mA, Circuit of Figure 2a | typ 20 mV/A | 2 |
| Maximum Switch On-Time tON(max) | min 12 · typ 16 · max 20 us | 2 | |
| Minimum Switch Off-Time tOFF(min) | min 1.8 · typ 2.3 · max 2.8 us | 2 | |
| Efficiency | V+ = 5V, VOUT = 12V, ILOAD = 500mA, Circuit of Figure 2a | typ 92 % | 2 |
| Reference Voltage VREF | IREF = 0uA, MAX1771E | min 1.4625 · typ 1.5 · max 1.5375 V | 2 |
| REF Load Regulation | 0uA ≤ IREF ≤ 100uA, MAX1771C/E | typ 4 · max 10 mV | 2 |
| REF Line Regulation | 3V ≤ V+ ≤ 16.5V | typ 40 · max 100 uV/V | 2 |
| FB Trip Point Voltage VFB | MAX1771E | min 1.4625 · typ 1.5 · max 1.5375 V | 2 |
| FB Input Current IFB | MAX1771E; maximum magnitude specified as ±40 nA | max 40 nA | 3 |
| SHDN Input High Voltage VIH | V+ = 2V to 16.5V | min 1.6 V | 3 |
| SHDN Input Low Voltage VIL | V+ = 2V to 16.5V | max 0.4 V | 3 |
| SHDN Input Current | V+ = 16.5V, SHDN = 0V or V+; maximum magnitude specified as ±1 uA | max 1 uA | 3 |
| Current-Limit Trip Level VCS | V+ = 5V to 16V, MAX1771C/E | min 85 · typ 100 · max 115 mV | 3 |
| CS Input Current | Maximum magnitude specified as ±1 uA | typ 0.01 · max 1 uA | 3 |
| EXT Rise Time | V+ = 5V, 1nF from EXT to ground | typ 55 ns | 3 |
| EXT Fall Time | V+ = 5V, 1nF from EXT to ground | typ 55 ns | 3 |

Hardware7253/OperationUrd
A nixie tube clock inspired by the divergence meter from Steins;Gate.
Yes. The symbol is Regulator_Switching:MAX1771xSA and the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SO-8, with 8 pins. Its footprint is drawn on this page.
Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C407903, with 1,300 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the MAX1771ESA+ by Maxim Integrated (Analog Devices), the MAX1771CSA+ by Maxim Integrated (Analog Devices), the AP1509-12SG-13-JSM by JSMSEMI and the MAX1771CSA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.