
Riscduino Uno
dineshannayya/riscduino_bringup
Host all the MPW Bring-up related Enviornment
Maxim Integrated (Analog Devices)Extended
-40℃~+85℃@(TA) 1 250ms 4.5V~5.5V 4.62V 50uA Active Low Open-drain、Push-pull Voltage monitor Watchdog timer、Manual reset input SO-8 Supervisor and Reset ICs ROHS
The MAX1232ESA+T is a supervisor And Reset IC made by Maxim Integrated (Analog Devices) in a SO-8 package with 8 pins. -40℃~+85℃@(TA) 1 250ms 4.5V~5.5V 4.62V 50uA Active Low Open-drain、Push-pull Voltage monitor Watchdog timer、Manual reset input SO-8 Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DS1232LPS-2+, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 16 are in stock at JLCPCB (part C407900). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage Range on Any Pin (with respect to GND) | With respect to GND | min -1 · max 7 V | 2 |
| Operating Temperature Range | E Suffix | min -40 · max 85 °C | 2 |
| Storage Temperature Range | min -65 · max 160 °C | 2 | |
| Lead Temperature (soldering, 10s) | Soldering, 10s | max 300 °C | 2 |
| Supply Voltage VCC | TA = TMIN to TMAX, unless otherwise noted. | min 4.5 · typ 5 · max 5.5 V | 2 |
| ST and PBRST Input High Level (Note 1) VIH | TA = TMIN to TMAX; PBRST internally pulled up to VCC with typically 40kΩ impedance | min 2 V | 2 |
| ST and PBRST Input Low Level VIL | TA = TMIN to TMAX, unless otherwise noted. | min -0.3 · max 0.8 V | 2 |
| Input Leakage ST, TOL IIL | VCC = +4.5V to +5.5V, TA = TMIN to TMAX | min -1 · max 1 uA | 2 |
| Output Current RST IOH | VOH = 2.4V; VCC = +4.5V to +5.5V, TA = TMIN to TMAX | min -1 · typ -12 mA | 2 |
| Output Current RST, RST IOL | VOL = 0.4V; VCC = +4.5V to +5.5V, TA = TMIN to TMAX | min 2 · typ 10 mA | 2 |
| Operating Current (Note 2) ICC | Measured with outputs open; VCC = +4.5V to +5.5V, TA = TMIN to TMAX | typ 50 · max 200 uA | 2 |
| VCC 5% Trip Point (Note 3) VCCTP | TOL = GND; all voltages referenced to GND; VCC = +4.5V to +5.5V, TA = TMIN to TMAX | min 4.5 · typ 4.62 · max 4.74 V | 2 |
| VCC 10% Trip Point (Note 3) VCCTP | TOL = VCC; all voltages referenced to GND; VCC = +4.5V to +5.5V, TA = TMIN to TMAX | min 4.25 · typ 4.37 · max 4.49 V | 2 |
| Input Capacitance ST, TOL CIN | TA = +25°C; guaranteed by design | max 5 pF | 2 |
| Output Capacitance RST, RST COUT | TA = +25°C; guaranteed by design | max 7 pF | 2 |
| PBRST (Note 5) tPB | Figure 3; VCC = +5V ±10%, TA = TMIN to TMAX | min 20 ms | 3 |
| PBRST Delay tPBD | Figure 3; VCC = +5V ±10%, TA = TMIN to TMAX | min 1 · typ 4 · max 20 ms | 3 |
| Reset Active Time tRST | VCC = +5V ±10%, TA = TMIN to TMAX | min 250 · typ 610 · max 1000 ms | 3 |
| ST Pulse Width tST | Figure 4; VCC = +5V ±10%, TA = TMIN to TMAX | min 75 ns | 3 |
| ST Timeout Period tTD | Figure 4, TD pin = 0V; VCC = +5V ±10%, TA = TMIN to TMAX | min 62.5 · typ 150 · max 250 ms | 3 |
| ST Timeout Period tTD | TD pin = open; VCC = +5V ±10%, TA = TMIN to TMAX | min 250 · typ 600 · max 1000 ms | 3 |
| ST Timeout Period tTD | TD pin = VCC; VCC = +5V ±10%, TA = TMIN to TMAX | min 500 · typ 1200 · max 2000 ms | 3 |
| VCC Fall Time (Note 4) tF | Figure 5; guaranteed by design; VCC = +5V ±10%, TA = TMIN to TMAX | min 10 us | 3 |
| VCC Rise Time (Note 4) tB | Figure 6; guaranteed by design; VCC = +5V ±10%, TA = TMIN to TMAX | min 0 us | 3 |
| VCC Detect to RST High and RST Low tBPD | Figure 7, VCC falling; VCC = +5V ±10%, TA = TMIN to TMAX | max 100 ns | 3 |
| VCC Detect to RST Low and RST Open (Note 6) tBPU | Figure 8, VCC rising; tR = 5us; VCC = +5V ±10%, TA = TMIN to TMAX | min 250 · typ 610 · max 1000 ms | 3 |
| ST Timeout Period tTD | TD pin = 0V | min 62.5 · typ 150 · max 250 ms | 5 |
| ST Timeout Period tTD | TD pin = open | min 250 · typ 250 · max 1000 ms | 5 |
| ST Timeout Period tTD | TD pin = VCC | min 500 · typ 1200 · max 2000 ms | 5 |

dineshannayya/riscduino_bringup
Host all the MPW Bring-up related Enviornment
Yes. The symbol is EasyEDA_Cloud:DS1232LPS-2+ and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SO-8, with 8 pins. Its footprint is drawn on this page.
Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C407900, with 16 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the TPS3705-33D by Texas Instruments, the SP706REN-L/TR by MaxLinear, the SP706TEN-L/TR by MaxLinear and the MAX706RESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.