2 layers28.6 × 99.7 mm
Main pcb
Testbild-synth/HAGIWO-040-VCS-Eurorack
Through-hole PCB version of the HAGIWO "Select" voltage controlled Switch Eurorack module
49 parts15MIT
DG211CJ
Maxim Integrated (Analog Devices)
Quad SPST CMOS Analog Switches (Normally Close)
- Part id
- maxim/DG211CJ
- Category
- Uncategorised
- Package
- DIP16-300
- Pins
- 16
- Used on
- 1 open-source board
Overview
The DG211CJ is an uncategorised made by Maxim Integrated (Analog Devices) in a DIP16-300 package with 16 pins. Quad SPST CMOS Analog Switches (Normally Close).
PCBKit's library has its KiCad symbol (Analog & Interface:DG211_a, from CERN's library) and its footprint (ICs And Semiconductors THD:DIP16-300, from CERN's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | IN1 | Input |
| 2 | D1 | Input/output |
| 3 | S1 | Input/output |
| 4 | V- | Power in |
| 5 | GND | Power in |
| 6 | S4 | Input/output |
| 7 | D4 | Input/output |
| 8 | IN4 | Input |
| 9 | IN3 | Input |
| 10 | D3 | Input/output |
| 11 | S3 | Input/output |
| 12 | N.C. | Power in |
| 13 | V+ | Power in |
| 14 | S2 | Input/output |
| 15 | D2 | Input/output |
| 16 | IN2 | Input |
Open-source boards using it
1Parts like it
8
AD526CD
DIP16-300Software Programmable Gain AmplifierAnalog DevicesUncategorisedADG211AKN
DIP16-300LC2MOS ±15V Quad SPST Switches (Normally Open)Analog DevicesUncategorisedADG212AKN
DIP16-300LC2MOS ±15V Quad SPST Switches (Normally Close)Analog DevicesUncategorisedADG408BN
DIP16-3008-Channel High-Performance CMOS Analog MultiplexersAnalog DevicesUncategorisedADG453BN
DIP16-300LC2MOS 5 Ohms RON SPST Switches (2 Normally closed + 2 Normally Open)Analog DevicesUncategorisedPS2502-4
DIP16-300Quad High Isolation Voltage Photocoupler (Photodarlington Transistor Output)CELUncategorisedISP845X
DIP16-300Quad High Density Mounting Photodarlington Optically Coupled IsolatorIsocom ComponentsUncategorisedISQ203
DIP16-300Quad High Density Phototransistor Optically Coupled IsolatorsIsocom ComponentsUncategorised
Questions
Is there a KiCad symbol and footprint for the DG211CJ?
Yes. The symbol is Analog & Interface:DG211_a and the footprint ICs And Semiconductors THD:DIP16-300, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DG211CJ?
DIP16-300, with 16 pins. Its footprint is drawn on this page.
What can replace the DG211CJ?
Parts like it in the library: the AD526CD by Analog Devices, the ADG211AKN by Analog Devices, the ADG212AKN by Analog Devices and the ADG408BN by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DG211CJ?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.