Skip to the content
1234567891011121314

LS7366R-TS

LSI/CSIExtended

-25℃~+80℃ 1 32 3V~5.5V 40MHz Asynchronous、Synchronous Divide-by-2 Falling Edge、Rising Edge LS Programmable divide ratio、Reset function、Synchronous counting、Multi-mode counting、Count value latch Synchronous Up Counter、Down Counter TSSOP-14 Counters, Dividers ROHS

Part id
lsi-csi/LS7366R-TS
Category
Counters, Dividers
Package
TSSOP-14
Pins
14
In stock
408 at JLCPCB (C3828496)
Used on
2 open-source boards

Overview

The LS7366R-TS is a counters, Divider made by LSI/CSI in a TSSOP-14 package with 14 pins. -25℃~+80℃ 1 32 3V~5.5V 40MHz Asynchronous、Synchronous Divide-by-2 Falling Edge、Rising Edge LS Programmable divide ratio、Reset function、Synchronous counting、Multi-mode counting、Count value latch Synchronous Up Counter、Down Counter TSSOP-14 Counters, Dividers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LS7366R-TS, from EasyEDA) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 408 are in stock at JLCPCB (part C3828496). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

14VDD13CNT_EN12A11B10INDEX/9DFLAG/8LFLAG/7MOSI6MISO5SCK4SS/3VSS2fCKi1fCKO
EasyEDA_Cloud:LS7366R-TSFrom EasyEDA

Footprint

1234567891011121314
Package_SO:TSSOP-14_4.4x5mm_P0.65mmFrom KiCad's library

Pinout

14
The pins of the LS7366R-TS
PinNameType
1fCKOUnspecified
2fCKiUnspecified
3VSSUnspecified
4SS/Unspecified
5SCKUnspecified
6MISOUnspecified
7MOSIUnspecified
8LFLAG/Unspecified
9DFLAG/Unspecified
10INDEX/Unspecified
11BUnspecified
12AUnspecified
13CNT_ENUnspecified
14VDDUnspecified

Open-source boards using it

2
  • 4 layers77.7 × 35.4 mmDRV8243 - LS7366R DC Motion Controller, the printed circuit board in 3D

    DRV8243 - LS7366R DC Motion Controller

    Pan-Robotics/DRV8243-LS7366R-Motion-Controller

    Motion Control PCB, integrating the DRV8243 motor driver and LS7366R encoder reader for feedback control of DC motors

    45 parts1
  • 2 layers70 × 100 mmEKIO CNTx4, the printed circuit board in 3D

    EKIO CNTx4

    Konstantin-Dudersky/plc-modules

    После открыть файл в Inkscape и изменить размер страницы

    90 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LS7366R-TS?

Yes. The symbol is EasyEDA_Cloud:LS7366R-TS and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LS7366R-TS?

TSSOP-14, with 14 pins. Its footprint is drawn on this page.

Where is the LS7366R-TS datasheet?

LSI/CSI publishes it: the Datasheet link on this page opens it.

Where can I order the LS7366R-TS?

JLCPCB lists it as part C3828496, with 408 in stock; the sellers' links on this page open their listings.

What can replace the LS7366R-TS?

Parts like it in the library: the CD74HC4024PW by Texas Instruments, the SN74HC393PW by Texas Instruments, the SN74LV393ATPWRQ1 by Texas Instruments and the CD4024BPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LS7366R-TS?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.