
3D Printer Mainboard STM32
m47812/Custom-3D-Printer-Controller
A fully custom 3D Printer controller board based on an stm32f7 controller with TMC2209 stepper drivers
LittelfuseExtended
-65℃~+150℃ 13.3A@10/1000us 1uA 28.2V 34.7V 45.7V 600W@10/1000us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-214AA ESD and Surge Protection (TVS/ESD) ROHS
The P6SMB33A is an ESD And Surge Protection made by Littelfuse in a DO-214AA package with 2 pins. -65℃~+150℃ 13.3A@10/1000us 1uA 28.2V 34.7V 45.7V 600W@10/1000us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-214AA ESD and Surge Protection (TVS/ESD) ROHS.
PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 6,321 are in stock at JLCPCB (part C151221). 3 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Passive |
| 2 | A2 | Passive |

m47812/Custom-3D-Printer-Controller
A fully custom 3D Printer controller board based on an stm32f7 controller with TMC2209 stepper drivers


JuanPoueriet/automatic-spork
Máquina de ruleta física de casino. 6 PCBs: pic32main (cerebro), wheel (rueda de LEDs), displaysa/b/c (paneles de 7 segmentos en cascada) y buttons (botonera).
Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.
DO-214AA, with 2 pins. Its footprint is drawn on this page.
Littelfuse publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C151221, with 6,321 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the P6SMB33CA by hongjiacheng, the SM6T33A by FUXINSEMI, the P6SMB33A by FUXINSEMI and the P6SMB33CA by Littelfuse. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.