
EveningStar
ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.
LittelfuseExtended
-55℃~+125℃ 0.6029 125V 125V 1A 2.5mm 50A 6.1mm Surface Mount Fuse 2410 Disposable fuses ROHS
The 0451001.MRL is a disposable Fuse made by Littelfuse in a 2410 package with 2 pins. -55℃~+125℃ 0.6029 125V 125V 1A 2.5mm 50A 6.1mm Surface Mount Fuse 2410 Disposable fuses ROHS.
PCBKit's library has its KiCad symbol (Device:Fuse, from KiCad's library) and its footprint (EasyEDA_Pro:fuse-smd_l6.1-w2.6, from EasyEDA Pro), ready for a KiCad board. 8,462 are in stock at JLCPCB (part C3099). 10 open-source boards in 5 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | — | Passive |
| 2 | — | Passive |

ciaassured/eveningstar-hardware
Hardware design for the Eveningstar ESP32-based Morningstar MeterBus interface.

ahdrage/leafy
DIY Wi-Fi climate-control prototype for Nissan Leaf: KiCad PCB, ESP32-C3 firmware, Blender enclosure and build notes. Inspired by OVMS.

Atif6894/automotive-ble-can-pcb
A small 4-layer board that sits on a vehicle's 12/24 V harness, talks CAN FD through a TCAN4550-Q1, and exposes it over Bluetooth LE through a CC2340R5-Q1.

nikolajevs/ai
Открыть PCBV1.kicadpro в KiCad 10. После обновления репозитория перечитать открытый проект с диска перед сохранением.

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

ahdrage/leafy
DIY Wi-Fi climate-control prototype for Nissan Leaf: KiCad PCB, ESP32-C3 firmware, Blender enclosure and build notes. Inspired by OVMS.

ahdrage/leafy
DIY Wi-Fi climate-control prototype for Nissan Leaf: KiCad PCB, ESP32-C3 firmware, Blender enclosure and build notes. Inspired by OVMS.

ahdrage/leafy
DIY Wi-Fi climate-control prototype for Nissan Leaf: KiCad PCB, ESP32-C3 firmware, Blender enclosure and build notes. Inspired by OVMS.
Yes. The symbol is Device:Fuse and the footprint EasyEDA_Pro:fuse-smd_l6.1-w2.6, both drawn on this page. PCBKit places them on a board for you when you design with it.
2410, with 2 pins. Its footprint is drawn on this page.
Littelfuse publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3099, with 8,462 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the 0451015.MRL by Littelfuse and the 24E1500A by LANSON. Check their datasheets: a part that fits the footprint may still differ in its ratings.
10 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.