Skip to the content
12345678

IXDN602PI

Littelfuse/IXYSExtended

-40℃~+125℃ 2 2A 2A 35ns 38ns 4.5V~35V 6.5ns 7.5ns IGBT、MOSFET Low Side DIP-8 Gate Drivers ROHS

Part id
littelfuse-ixys/IXDN602PI
Category
Gate Drivers
Package
DIP-8
Pins
8
In stock
100 at JLCPCB (C426683)
Used on
5 open-source boards

Overview

The IXDN602PI is a gate Driver made by Littelfuse/IXYS in a DIP-8 package with 8 pins. -40℃~+125℃ 2 2A 2A 35ns 38ns 4.5V~35V 6.5ns 7.5ns IGBT、MOSFET Low Side DIP-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NSG27324, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 100 are in stock at JLCPCB (part C426683). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1NC2INA3GND4INB5OUTB6VCC7OUTA8NC
EasyEDA_Cloud:NSG27324From EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the IXDN602PI
PinNameType
1NCUnspecified
2INAUnspecified
3GNDUnspecified
4INBUnspecified
5OUTBUnspecified
6VCCUnspecified
7OUTAUnspecified
8NCUnspecified

Open-source boards using it

5
  • 2 layers100 × 100 mmV0.4.4d, the printed circuit board in 3D

    V0.4.4d

    speeduino/Hardware

    Official Speeduino hardware designs

    297 parts283
  • 4 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    245 parts19
  • 4 layers99.8 × 115 mmIgnitionController, the printed circuit board in 3D

    IgnitionController

    MiroslavMitrovic/IgnitionController_STM32

    Ignition controller implementation for 4T Single Cylinder/V-Twin motorcycle.

    226 partsGPL-3.0
  • 4 layers100 × 100 mmSpeeday, the printed circuit board in 3D

    Speeday

    MIsfitMatty/Speeduino-Daytona

    223 parts
  • 4 layers100 × 100 mmSpeeday, the printed circuit board in 3D

    Speeday

    Thrathra/Speeduino-Daytona

    281 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IXDN602PI?

Yes. The symbol is EasyEDA_Cloud:NSG27324 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IXDN602PI?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the IXDN602PI datasheet?

Littelfuse/IXYS publishes it: the Datasheet link on this page opens it.

Where can I order the IXDN602PI?

JLCPCB lists it as part C426683, with 100 in stock; the sellers' links on this page open their listings.

What can replace the IXDN602PI?

Parts like it in the library: the IR2153PBF by Infineon Technologies, the IXDN614PI by Littelfuse/IXYS, the IXDD614PI by Littelfuse/IXYS and the IXDN604PI by Littelfuse/IXYS. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IXDN602PI?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.