Skip to the content
12345678910

KCSA02-105

KingbrightExtended

-40℃~+85℃ 0.2 1 1.85V 10mm 3mm 6.9mm 7 Segment 75mW Common Anode Red SMD LED Segment Displays ROHS

Part id
kingbright/KCSA02-105
Category
LED Segment Displays
Package
SMD
Pins
10
In stock
77 at JLCPCB (C598235)
Used on
7 open-source boards

Overview

The KCSA02-105 is a LED Segment Display made by Kingbright in a SMD package with 10 pins. -40℃~+85℃ 0.2 1 1.85V 10mm 3mm 6.9mm 7 Segment 75mW Common Anode Red SMD LED Segment Displays ROHS.

PCBKit's library has its KiCad symbol (Display_Character:KCSA02-105, from KiCad's library) and its footprint (Display_7Segment:KCSC02-105, from KiCad's library), ready for a KiCad board. 77 are in stock at JLCPCB (part C598235). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1E2D3CA4C5DP6B7A8CA9F10G
Display_Character:KCSA02-105From KiCad's library

Footprint

12345678910
Display_7Segment:KCSC02-105From KiCad's library

Pinout

10
The pins of the KCSA02-105
PinNameType
1EInput
2DInput
3CAInput
4CInput
5DPInput
6BInput
7AInput
8CAInput
9FInput
10GInput

Open-source boards using it

7
  • 2 layers37 × 39.8 mmWatch, the printed circuit board in 3D

    Watch

    Dragon863/CFWatch

    A watch I built from scratch, inspired by cassette futurism

    54 parts5
  • 2 layers12.6 × 19 mmHexdigit, the printed circuit board in 3D

    Hexdigit

    gbrown128/hexdigit

    A 4-bit hex decoder in a seven segment display decoder.

    8 parts3GPL-3.0
  • 2 layers30 × 40 mmAvrwatch v2, the printed circuit board in 3D

    Avrwatch v2

    hecko/avrwatch

    Watch using AVR IC and display. Wearable.

    10 parts1
  • 2 layers34.8 × 17 mmRpiHeadSegment, the printed circuit board in 3D

    RpiHeadSegment

    Johannes4Linux/clt2024

    Sourcecode für meine Beispiele des Linux Treiber Workshops auf der CLT2024

    19 parts1
  • 2 layersDisplay, the printed circuit board in 3D

    Display

    rorywinters/BruceJL-mrgtimer_firmware

    Use arduino 1.8... newer versions might work too

    12 parts1GPL-3.0
  • 2 layers38 × 25 mmBTL, the printed circuit board in 3D

    BTL

    dquang05/trafficLight_PIC16F887

    Academic project - Micro Controller

    16 parts
  • 2 layersDisplays, the printed circuit board in 3D

    Displays

    EzioAARM/proyecto-url-arquitectura-del-computador-2-laboratorios

    Laboratorios de arqui 2

    72 parts

Questions

Is there a KiCad symbol and footprint for the KCSA02-105?

Yes. The symbol is Display_Character:KCSA02-105 and the footprint Display_7Segment:KCSC02-105, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the KCSA02-105?

SMD, with 10 pins. Its footprint is drawn on this page.

Where is the KCSA02-105 datasheet?

Kingbright publishes it: the Datasheet link on this page opens it.

Where can I order the KCSA02-105?

JLCPCB lists it as part C598235, with 77 in stock; the sellers' links on this page open their listings.

Which open-source boards use the KCSA02-105?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.