Skip to the content
P=2.5mm

XHP-3

JSTExtended

-25℃~+85℃ 1 1x3P 2.5mm 3 Non-Latching PA6 UL94V-0 White Without Fins XH P=2.5mm Housings (Wire To Board / Wire To Wire ) ROHS

Part id
jst/XHP-3
Category
Housings (Wire To Board, Wire To Wire )
Package
P=2.5mm
Pins
1
In stock
99,526 at JLCPCB (C144402)
Used on
1 open-source board

Overview

The XHP-3 is a housing made by JST in a P=2.5mm package with 1 pins. -25℃~+85℃ 1 1x3P 2.5mm 3 Non-Latching PA6 UL94V-0 White Without Fins XH P=2.5mm Housings (Wire To Board / Wire To Wire ) ROHS.

99,526 are in stock at JLCPCB (part C144402). 1 open-source board in 1 repository on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Open-source boards using it

1
  • 4 layers50 × 50 mmA3-srad camera v2, the printed circuit board in 3D

    A3-srad camera v2

    eric-handley/a3-srad-cameras

    Please read the following document carefully as there are several important notes that could result in data loss or damage if ignored. After the rocket is recovered, please follow Post-Flight Operations.

    181 parts

Questions

What package is the XHP-3?

P=2.5mm, with 1 pins.

Where is the XHP-3 datasheet?

JST publishes it: the Datasheet link on this page opens it.

Where can I order the XHP-3?

JLCPCB lists it as part C144402, with 99,526 in stock; the sellers' links on this page open their listings.

Which open-source boards use the XHP-3?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.