The DX07S024JJ2 is an uncategorised made by JAE Electronics with 25 pins.
PCBKit's library has its KiCad symbol (USB-C_JAE_DX07S024JJ2:USB-C_JAE_DX07S024JJ2, from Antmicro) and its footprint (usb-c-receptacle-jae-dx07s024jj2:USB-C_Receptacle_JAE_DX07S024JJ2, from Antmicro), ready for a KiCad board. 3 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| A1 | GND | Power in |
| A2 | TX_{1}+ | Input/output |
| A3 | TX_{1}- | Input/output |
| A4 | VBUS | Power in |
| A5 | CC_{1} | Input/output |
| A6 | D_{A}+ | Input/output |
| A7 | D_{A}- | Input/output |
| A8 | SBU_{1} | Input/output |
| A9 | VBUS | Passive |
| A10 | RX_{2}- | Input/output |
| A11 | RX_{2}+ | Input/output |
| A12 | GND | Passive |
| B1 | GND | Passive |
| B2 | TX_{2}+ | Input/output |
| B3 | TX_{2}- | Input/output |
| B4 | VBUS | Passive |
| B5 | CC_{2} | Input/output |
| B6 | D_{B}+ | Input/output |
| B7 | D_{B}- | Input/output |
| B8 | SBU_{2} | Input/output |
| B9 | VBUS | Passive |
| B10 | RX_{1}- | Input/output |
| B11 | RX_{1}+ | Input/output |
| B12 | GND | Passive |
| SH | SH | Passive |
antmicro/thunderbolt-pcie-adapter
This project contains open hardware design files for an adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.
kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.
kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.
<iframe src="https://pcbkit.io/embed/parts/jae-electronics/DX07S024JJ2" title="DX07S024JJ2 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/jae-electronics/DX07S024JJ2.jpg" alt="DX07S024JJ2" width="1200" height="900">[](https://pcbkit.io/parts/jae-electronics/DX07S024JJ2)Yes. The symbol is USB-C_JAE_DX07S024JJ2:USB-C_JAE_DX07S024JJ2 and the footprint usb-c-receptacle-jae-dx07s024jj2:USB-C_Receptacle_JAE_DX07S024JJ2, both drawn on this page. PCBKit places them on a board for you when you design with it.
JAE Electronics publishes it: the Datasheet link on this page opens it.
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.