
Reflow
windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.
ISOCOM LIMITEDExtended
The TLP290 is a transistor, Photovoltaic Output Optoisolator made by ISOCOM LIMITED in a SSOP-4 package with 4 pins.
PCBKit's library has its KiCad symbol (Isolator:TLP290, from KiCad's library) and its footprint (Package_SO:SOP-4_4.4x2.6mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C36498886). 3 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | — | Passive |
| 2 | — | Passive |
| 3 | — | Passive |
| 4 | — | Passive |

windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support

Yes. The symbol is Isolator:TLP290 and the footprint Package_SO:SOP-4_4.4x2.6mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SSOP-4, with 4 pins. Its footprint is drawn on this page.
ISOCOM LIMITED publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C36498886, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LTV-217-B-G by Lite-On, the TLP290(GB-TP,SE by Toshiba, the TCMT1100 by Vishay Intertechnology and the TLP290(GR-TP,SE by Toshiba. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.