Skip to the content
SMD-4P,10.5x10.5mm

PL9103T

iNRCOREExtended

2.7uH 7.8A 7.8mΩ 8.4A ±30% SMD-4P,10.5x10.5mm Power Inductors

Part id
inrcore/PL9103T
Category
Power Inductors
Package
SMD-4P,10.5x10.5mm
Pins
5
In stock
0 at JLCPCB (C17689695)

Overview

The PL9103T is a power Inductor made by iNRCORE in a SMD-4P,10.5x10.5mm package with 2 pins. 2.7uH 7.8A 7.8mΩ 8.4A ±30% SMD-4P,10.5x10.5mm Power Inductors.

PCBKit's library has its KiCad symbol (Device:L, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C17689695).

Symbol

Device:LFrom KiCad's library

Footprint

The library has no footprint for this part yet.

Pinout

2
The pins of the PL9103T
PinNameType
11Passive
22Passive

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PL9103T?

Yes. The symbol is Device:L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PL9103T?

SMD-4P,10.5x10.5mm, with 2 pins.

Where is the PL9103T datasheet?

iNRCORE publishes it: the Datasheet link on this page opens it.

Where can I order the PL9103T?

JLCPCB lists it as part C17689695, with 0 in stock; the sellers' links on this page open their listings.

What can replace the PL9103T?

Parts like it in the library: the FTKB1207-2R7NT by cjiang, the CDRH10D60BT150NP-2R7NC by Sumida, the XEL6060-272MEC by Coilcraft and the PA4343.272NLT by Pulse Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.