6 layers82.5 × 82.5 mm
Gps
xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
201 parts
IP5306H
INJOINICExtended
- Part id
- injoinic/IP5306H
- Category
- Uncategorised
- Package
- ESOP-8
- Pins
- 9
- In stock
- 0 at JLCPCB (C49420526)
- Used on
- 1 open-source board
Overview
The IP5306H is an uncategorised made by INJOINIC in a ESOP-8 package with 9 pins.
PCBKit's library has its KiCad symbol (OLIMEX_Regulators:IP5306, from Olimex) and its footprint (OLIMEX_Regulators-FP:eSOP8L, from Olimex), ready for a KiCad board. JLCPCB lists it (part C49420526). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | VIN | Power in |
| 2 | LED1 | Input/output |
| 3 | LED2 | Input/output |
| 4 | LED3 | Input/output |
| 5 | KEY | Input |
| 6 | BAT_Sense | Input |
| 7 | SW | Output |
| 8 | VOUT | Power out |
| 9 | GND | Power in |
Open-source boards using it
1Parts like it
1
Questions
Is there a KiCad symbol and footprint for the IP5306H?
Yes. The symbol is OLIMEX_Regulators:IP5306 and the footprint OLIMEX_Regulators-FP:eSOP8L, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the IP5306H?
ESOP-8, with 9 pins. Its footprint is drawn on this page.
Where can I order the IP5306H?
JLCPCB lists it as part C49420526, with 0 in stock; the sellers' links on this page open their listings.
What can replace the IP5306H?
Parts like it in the library: the IP5306-CK by INJOINIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the IP5306H?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.