
IP2312-4V35
INJOINICExtended
-40℃~+150℃ 1 3A 4.5V~5.5V 40uA Charging IC Lithium Battery Support ESOP-8 Battery Management ROHS
- Part id
- injoinic/IP2312-4V35
- Category
- Battery Management
- Package
- ESOP-8
- Pins
- 9
- In stock
- 5,157 at JLCPCB (C605433)
- Used on
- 2 open-source boards
Overview
The IP2312-4V35 is a battery Management made by INJOINIC in a ESOP-8 package with 9 pins. -40℃~+150℃ 1 3A 4.5V~5.5V 40uA Charging IC Lithium Battery Support ESOP-8 Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:IP2313, from EasyEDA) and its footprint (EasyEDA_Cloud:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-2, from EasyEDA), ready for a KiCad board. 5,157 are in stock at JLCPCB (part C605433). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
7- Supply, least
- 4.5 V · VIN, recommended operating min · p. 3
- Supply, most
- 5.5 V · VIN, recommended operating max · p. 3
- Junction, hottest
- 150 °C · junction temperature absolute max · p. 3
- Junction to air (ESOP8)
- 60 K/W · junction to ambient · p. 3
- Gives
- 3 A · continuous charging current max · p. 3
- Switches at
- 750 kHz · charging switching frequency typical · p. 4
- Takes asleep
- 40 µA · BAT standby current typical, VIN = 0 V, VBAT = 3.7 V · p. 4
What it is and has
10- Charging architecture
- 同步开关降压充电 · p. 1
- Charging efficiency
- 94%(3.7V/2A) · p. 1
- Charging current
- 外部电阻可调节 · p. 1
- Protection
- 充电 NTC 温度保护 · p. 1
- Status indication
- LED 充电状态指示 · p. 1
- Power MOSFETs
- 内置 · p. 1
- Protection
- 输入过压、欠压保护 · p. 1
- Protection
- IC 过温保护 · p. 1
- Protection
- 充电超时保护 · p. 1
- Package
- ESOP8 · p. 1
Around it
5- res 1K
- between TEST and BAT; 测试引脚连接到电池正极。 · p. 2
- res 51K
- between NTC and GND; 不需要 NTC 功能时使用;NTC 引脚不能浮空。 · p. 8
- res 135Kohm
- between ICHG and GND; 推荐值,对应 1A 恒流充电。 · p. 7
- res 91Kohm
- between ICHG and GND; 推荐值,对应 1.5A 恒流充电。 · p. 7
- res 45Kohm
- between ICHG and GND; 推荐值,对应 3A 恒流充电。 · p. 7
Specifications
28| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VIN、SW、BAT 引脚耐压 | 小于 10uS 的脉冲 | max 9 V | 3 |
| VIN、SW、BAT 引脚耐压 | 大于 10uS 的脉冲 | max 6.5 V | 3 |
| D1、D2、NTC、ICHG、TEST 引脚耐压 | max 6 V | 3 | |
| 内置 PMOS VDS 电压 | min -12 V | 3 | |
| 内置 PMOS 最大持续电流 | max 5 A | 3 | |
| 内置 NMOS VDS 电压 | max 12 V | 3 | |
| 内置 NMOS 最大持续电流 | max 6 A | 3 | |
| 结温范围 TJ | min -40 · max 150 ℃ | 3 | |
| 存储温度范围 Tstg | min -60 · max 150 ℃ | 3 | |
| 热阻(结温到环境) θJA | ESOP8 | typ 60 ℃/W | 3 |
| 人体模型(HBM) ESD | max 4 KV | 3 | |
| 输入电压 VIN | min 4.5 · typ 5 · max 5.5 V | 3 | |
| 充电电流 ICHRG | min 0 · typ 2.1 · max 3 A | 3 | |
| 输入电压 VIN | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 4.5 · typ 5 · max 5.5 V | 3 |
| 默认充电电流 ICHRG | TA=25℃,L=1uH,VIN =5V,VBAT =3.7V,RICHG =NC | min 1.8 · typ 2.1 · max 2.4 A | 3 |
| 充电电流设置电阻最大值 RICHG | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 170 · typ 175 · max 180 KΩ | 4 |
| 充电开关频率 fs | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 650 · typ 750 · max 850 KHz | 4 |
| 涓流充电电流 ITRKL | TA=25℃,L=1uH,VIN =5V,VBAT =2.7V | min 50 · typ 100 · max 300 mA | 4 |
| 涓流截止电压 VTRKL | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 2.9 · typ 3 · max 3.1 V | 4 |
| 充电截止时间 TEND | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 20 · typ 24 · max 28 Hour | 4 |
| 输入欠压保护电压 VIN-UVLO | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 4.4 · typ 4.5 · max 4.6 V | 4 |
| 输入过压保护电压 VIN-OVP | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 5.5 · typ 5.6 · max 5.7 V | 4 |
| PMOS 导通电阻 rDSON | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 30 · typ 35 · max 40 mΩ | 4 |
| NMOS 导通电阻 rDSON | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 25 · typ 30 · max 35 mΩ | 4 |
| 电池输入待机电流 ISTB | TA=25℃,L=1uH,VIN =0V,VBAT =3.7V | min 30 · typ 40 · max 50 uA | 4 |
| LED 显示驱动电流 IL1 / IL2 / IL3 | TA=25℃,L=1uH,VIN =5V,VBAT=3.7V | min 3 · typ 5 · max 10 mA | 4 |
| 热关断温度 TOTP | 上升温度 | min 110 · typ 135 · max 150 ℃ | 4 |
| 热关断恢复温度 TOTP | 下降温度 | min 70 · typ 85 · max 100 ℃ | 4 |
Pins, by the datasheet
9- 1 D1
- LED 驱动引脚;IP2312_VSET 型号兼作电池类型选择。 · p. 2
- 2 TEST
- 测试引脚,接 1K 电阻到电池正极。 · p. 2
- 3 D2
- LED 驱动引脚。 · p. 2
- 4 NTC
- NTC 温度保护,接 NTC 电阻。 · p. 2
- 5 BAT
- 连接锂电池正极。 · p. 2
- 6 ICHG
- 充电电流设置引脚。 · p. 2
- 7 SW
- DC-DC 开关引脚。 · p. 2
- 8 VIN
- 5V 充电输入引脚。 · p. 2
- -- EPAD
- GND。 · p. 2
Open-source boards using it
2- 2 layers90.4 × 89.6 mm

- 4 layers100 × 80 mm

AuraForge-50X
RaviKachhwaha/AuraForge-50X
A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…
83 parts
Parts like it
8FBC4066YESOP8G/TR
ESOP-8ESOP-8 Battery Management ROHSFull-WayBattery ManagementLGS4056HEP
ESOP-8-40℃~+85℃ 1 150uA 1A 4.2V 4V~6V Charging IC Support Support ESOP-8 Battery Management ROHSLegend-SiBattery ManagementSE9017-HF
SOT-23-6-40℃~+85℃ 1 20uA 3.5V~6V 4.21V 800mA Charging IC Lithium Battery Not supported Not supported SOT-23-6 Battery Management ROHSSeaward ElecBattery ManagementETA4056E8A
ESOP8-40℃~+85℃ 1 1.2A 4.25V~6V 4.2V 65uA Charging IC Lithium Battery Support ESOP8 Battery Management ROHSetasolutionBattery ManagementETA6002E8A
ESOP-8-40℃~+85℃ 1 2.5A 4.2V 4.4V~5.5V 70uA Charging IC Lithium Battery Support Support ESOP-8 Battery Management ROHSetasolutionBattery ManagementETA9640E8A
ESOP8-40℃~+85℃ 1 1.15A 100uA 4.24V 4.5V~6V Charging IC Lithium Battery Not supported ESOP8 Battery Management ROHSetasolutionBattery ManagementETA9742E8A
ESOP8-40℃~+85℃ 1 3.2V 3A 4.21V 4.5V~5.5V Charging IC Not supported ESOP8 Battery Management ROHSetasolutionBattery ManagementTP5000X-4.35-ESOP8
ESOP-8-20℃~+85℃ 1 250uA 2A 4.35V 4.5V~9V Charging IC Lithium Battery Support ESOP-8 Battery Management ROHSTOPPOWERBattery Management
Questions
Is there a KiCad symbol and footprint for the IP2312-4V35?
Yes. The symbol is EasyEDA_Cloud:IP2313 and the footprint EasyEDA_Cloud:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-2, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the IP2312-4V35?
ESOP-8, with 9 pins. Its footprint is drawn on this page.
Where is the IP2312-4V35 datasheet?
INJOINIC publishes it: the Datasheet link on this page opens it.
Where can I order the IP2312-4V35?
JLCPCB lists it as part C605433, with 5,157 in stock; the sellers' links on this page open their listings.
What can replace the IP2312-4V35?
Parts like it in the library: the FBC4066YESOP8G/TR by Full-Way, the LGS4056HEP by Legend-Si, the SE9017-HF by Seaward Elec and the ETA4056E8A by etasolution. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the IP2312-4V35?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.