
H Bridge KiCAD
JoshWilbur/Electronic-Speed-Controller
Firmware for an STM32-based H-Bridge motor controller. This project won best demonstration, UMaine ECE Class of 2025
Infineon TechnologiesExtended
-40℃~+150℃ 10V~20V 1A 1A 2 20ns 35ns Low Side、High Side MOSFET Under Voltage Protection PDIP-8 Gate Drivers ROHS
The IR2011PBF is a gate Driver made by Infineon Technologies in a PDIP-8 package with 8 pins. -40℃~+150℃ 10V~20V 1A 1A 2 20ns 35ns Low Side、High Side MOSFET Under Voltage Protection PDIP-8 Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (Driver_FET:IR2011, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C537538). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VCC | Power in |
| 2 | VB | Passive |
| 3 | HO | Output |
| 4 | VS | Passive |
| 5 | HIN | Input |
| 6 | LIN | Input |
| 7 | COM | Power in |
| 8 | LO | Output |

JoshWilbur/Electronic-Speed-Controller
Firmware for an STM32-based H-Bridge motor controller. This project won best demonstration, UMaine ECE Class of 2025
Yes. The symbol is Driver_FET:IR2011 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Infineon Technologies publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C537538, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the IR2153PBF by Infineon Technologies, the IXDN614PI by Littelfuse/IXYS, the IXDD614PI by Littelfuse/IXYS and the IXDN604PI by Littelfuse/IXYS. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.