
Solar Project Rev0 - Manufactured First Build
Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
Infineon TechnologiesExtended
-55℃~+175℃ 15.5mΩ@10V 2 N-Channel 2.25nF 20A 29nC@10V 30pF 380pF 4V 50W 60V N-Channel TDSON-8-EP(5x6) MOSFETs ROHS
The BSC155N06ND is a MOSFET made by Infineon Technologies in a TDSON-8-EP(5x6) package with 8 pins. -55℃~+175℃ 15.5mΩ@10V 2 N-Channel 2.25nF 20A 29nC@10V 30pF 380pF 4V 50W 60V N-Channel TDSON-8-EP(5x6) MOSFETs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BSC077N12NS3 G, from EasyEDA) and its footprint (EasyEDA_Cloud:PDFN-8_L5.9-W5.2-P1.27-LS6.2-BL-1, from EasyEDA), ready for a KiCad board. 413 are in stock at JLCPCB (part C534419). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VDS VDS | max 60 V | 1 | |
| RDS(on),max RDS(on) | max 15.5 mΩ | 1 | |
| ID ID | max 20 A | 1 | |
| Continuous drain current ID | VGS=10 V, TC=25 °C; one transistor active | max 20 A | 3 |
| Pulsed drain current ID,pulse | TA=25 °C; one transistor active; see Diagram 3 | max 80 A | 3 |
| Avalanche energy, single pulse EAS | ID=10 A, RGS=25 Ω; TA=25 °C; one transistor active; see Diagram 13 | max 40 mJ | 3 |
| Gate source voltage VGS | TA=25 °C; one transistor active | min -20 · max 20 V | 3 |
| Power dissipation Ptot | TC=25 °C; one transistor active | max 50 W | 3 |
| Operating and storage temperature Tj, Tstg | IEC climatic category; DIN IEC 68-1: 55/175/56 | min -55 · max 175 °C | 3 |
| Thermal resistance, junction - case, bottom RthJC | SSO8 dual (TDSON-8-4) | max 3 °C/W | 3 |
| Device on PCB, 6 cm² cooling area RthJA | SSO8 dual (TDSON-8-4); 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 copper area for drain connection, one layer, 70 um thick; PCB vertical in still air | max 60 °C/W | 3 |
| Device on PCB, minimal footprint RthJA | SSO8 dual (TDSON-8-4); device mounted on a minimum pad, one layer, 70 um thick | max 100 °C/W | 3 |
| Drain-source breakdown voltage V(BR)DSS | VGS=0 V, ID=1 mA; Tj=25 °C | min 60 V | 3 |
| Gate threshold voltage VGS(th) | VDS=VGS, ID=20 uA; Tj=25 °C | min 2 · typ 3 · max 4 V | 3 |
| Zero gate voltage drain current IDSS | VDS=60 V, VGS=0 V, Tj=25 °C | typ 0.1 · max 1 uA | 3 |
| Zero gate voltage drain current IDSS | VDS=60 V, VGS=0 V, Tj=125 °C | typ 10 · max 100 uA | 3 |
| Gate-source leakage current IGSS | VGS=20 V, VDS=0 V; Tj=25 °C | max 100 nA | 3 |
| Drain-source on-state resistance RDS(on) | VGS=10 V, ID=17 A; Tj=25 °C | typ 12.9 · max 15.5 mΩ | 3 |
| Input capacitance Ciss | VGS=0 V, VDS=30 V, f=1 MHz; Tj=25 °C; defined by design, not subject to production test | typ 1730 · max 2250 pF | 4 |
| Output capacitance Coss | VGS=0 V, VDS=30 V, f=1 MHz; Tj=25 °C; defined by design, not subject to production test | typ 380 · max 490 pF | 4 |
| Reverse transfer capacitance Crss | VGS=0 V, VDS=30 V, f=1 MHz; Tj=25 °C; defined by design, not subject to production test | typ 15 · max 30 pF | 4 |
| Turn-on delay time td(on) | VDD=30 V, VGS=10 V, ID=20 A, RG,ext=11 Ω; Tj=25 °C | typ 11 ns | 4 |
| Rise time tr | VDD=30 V, VGS=10 V, ID=20 A, RG,ext=11 Ω; Tj=25 °C | typ 2 ns | 4 |
| Turn-off delay time td(off) | VDD=30 V, VGS=10 V, ID=20 A, RG,ext=11 Ω; Tj=25 °C | typ 19 ns | 4 |
| Fall time tf | VDD=30 V, VGS=10 V, ID=20 A, RG,ext=11 Ω; Tj=25 °C | typ 9 ns | 4 |
| Gate to source charge Qgs | VDD=30 V, ID=20 A, VGS=0 to 10 V; Tj=25 °C | typ 9 · max 12 nC | 4 |
| Gate to drain charge Qgd | VDD=30 V, ID=20 A, VGS=0 to 10 V; Tj=25 °C | typ 2 · max 4 nC | 4 |
| Gate charge total Qg | VDD=30 V, ID=20 A, VGS=0 to 10 V; Tj=25 °C; defined by design, not subject to production test | typ 21 · max 29 nC | 4 |
| Gate plateau voltage Vplateau | VDD=30 V, ID=20 A, VGS=0 to 10 V; Tj=25 °C | typ 5.3 V | 4 |
| Diode continuous forward current IS | TC=25 °C | max 20 A | 4 |
| Diode pulse current IS,pulse | TC=25 °C | max 80 A | 4 |
| Diode forward voltage VSD | VGS=0 V, IF=17 A, Tj=25 °C | typ 0.91 · max 1.1 V | 4 |
| Reverse recovery time trr | VR=15 V, IF=9 A, diF/dt=100 A/us; Tj=25 °C; defined by design, not subject to production test | typ 35 ns | 4 |
| Reverse recovery charge Qrr | VR=15 V, IF=9 A, diF/dt=100 A/us; Tj=25 °C; defined by design, not subject to production test | typ 35 nC | 4 |

Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
Yes. The symbol is EasyEDA_Cloud:BSC077N12NS3 G and the footprint EasyEDA_Cloud:PDFN-8_L5.9-W5.2-P1.27-LS6.2-BL-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
TDSON-8-EP(5x6), with 8 pins. Its footprint is drawn on this page.
Infineon Technologies publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C534419, with 413 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the HYG090ND06LS1C2 by HUAYI, the APG020N01GD by ALLPOWER, the TQM250NB06DCR RLG by Taiwan Semiconductor and the AGM615MNA by AGM-Semi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.