
Overview
The IP1001C is an ethernet Transceiver made by IC Plus in a QFN-68-EP(8x8) package with 69 pins. 0℃~+70℃ 1 1.8V、2.5V、3.3V MII、RGMII QFN-68-EP(8x8) Ethernet Transceivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:IP1001C, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-68_L8.0-W8.0-P0.40-BL-EP5.5, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C703551).
Symbol
Footprint
Parameters
8- Data Rate
- 10Mbit/s, 100Mbit/s, 1Gbit/s
- Ethernet Speed Standards
- 100BASE-TX, 1000BASE-T, 100BASE-FX, 1000BASE-X, 10BASE-Te
- Features
- Support optical fiber, IEEE1588 timestamp, Programmable LED indication, Low-power mode
- MAC Interface
- MII, RGMII
- Number of ports
- 1
- Operating Temperature
- 0℃~+70℃
- Type
- Ethernet Transceiver
- Voltage - Supply
- 1.8V, 3.3V, 2.5V
Order codes
1- IP1001CLCSC C703551
Pinout
69| Pin | Name | Type |
|---|---|---|
| 1 | NC | Unspecified |
| 2 | NC | Unspecified |
| 3 | NC | Unspecified |
| 4 | 1588_EVENT | Unspecified |
| 5 | 1588_PPS/RGMII_SET | Unspecified |
| 6 | MDIO | Unspecified |
| 7 | MDC | Unspecified |
| 8 | NC | Unspecified |
| 9 | DVDD10 | Unspecified |
| 10 | NC | Unspecified |
| 11 | RX_CTL/RGMII_dly_RXC | Unspecified |
| 12 | RXD0/3/RGMII_drive1 | Unspecified |
| 13 | RXD1/2/RGMII_drive0 | Unspecified |
| 14 | RXD2/1/RGMII_dly_rx | Unspecified |
| 15 | RXD3/0/RGMII_dly_tx | Unspecified |
| 16 | VDDIO_IN1 | Unspecified |
| 17 | RXCLK/PH_addr2 | Unspecified |
| 18 | SCAN | Unspecified |
| 19 | TXCLK | Unspecified |
| 20 | TXD0/3 | Unspecified |
| 21 | TXD1/2 | Unspecified |
| 22 | TXD2/1 | Unspecified |
| 23 | TXD3/0 | Unspecified |
| 24 | DVDD10 | Unspecified |
| 25 | TX_CTL | Unspecified |
| 26 | VDDIO_REG(LDO_OUT 1.8V/2.5V) | Unspecified |
| 27 | VDDIO_IN2 | Unspecified |
| 28 | EE_DAT | Unspecified |
| 29 | EE_CLK/AZenable | Unspecified |
| 30 | LED[1]/LED_CLK/100FX_MSK_EN | Unspecified |
| 31 | LED[2]/LED_DAT/LED_mode[0] | Unspecified |
| 32 | DVDD10 | Unspecified |
| 33 | LED[3]/LED_mode[1] | Unspecified |
| 34 | LED[4]/SERDES_set | Unspecified |
| 35 | LED[5]/PHY_addr0 | Unspecified |
| 36 | LED[6]/PHY_addr1 | Unspecified |
| 37 | FX_CFG | Unspecified |
| 38 | OP_mode | Unspecified |
| 39 | XMII_pin_reorder | Unspecified |
| 40 | MDI[0]+ | Unspecified |
| 41 | MDI[0]- | Unspecified |
| 42 | AVSS10 | Unspecified |
| 43 | MDI[1]+ | Unspecified |
| 44 | MDI[1]- | Unspecified |
| 45 | AVDD33 | Unspecified |
| 46 | MDI[2]+ | Unspecified |
| 47 | MDI[2]- | Unspecified |
| 48 | AVDD10 | Unspecified |
| 49 | MDI[3]+ | Unspecified |
| 50 | MDI[3]- | Unspecified |
| 51 | NC | Unspecified |
| 52 | SWR_VOUT | Unspecified |
| 53 | AVSS10 | Unspecified |
| 54 | AVDD33 | Unspecified |
| 55 | ISET | Unspecified |
| 56 | AVDD10 | Unspecified |
| 57 | NC | Unspecified |
| 58 | X1(XTLI) | Unspecified |
| 59 | X2(XTLO) | Unspecified |
| 60 | AVDD33 | Unspecified |
| 61 | SON | Unspecified |
| 62 | SOP | Unspecified |
| 63 | AVDD10 | Unspecified |
| 64 | SIP | Unspecified |
| 65 | SIN | Unspecified |
| 66 | SD | Unspecified |
| 67 | RESET | Unspecified |
| 68 | NC | Unspecified |
| 69 | EP | Unspecified |
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ic-plus/IP1001C" title="IP1001C in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ic-plus/IP1001C.jpg" alt="IP1001C" width="1200" height="900">[](https://pcbkit.io/parts/ic-plus/IP1001C)Questions
Is there a KiCad symbol and footprint for the IP1001C?
Yes. The symbol is EasyEDA_Cloud:IP1001C and the footprint EasyEDA_Cloud:QFN-68_L8.0-W8.0-P0.40-BL-EP5.5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the IP1001C?
QFN-68-EP(8x8), with 69 pins. Its footprint is drawn on this page.
Where is the IP1001C datasheet?
IC Plus publishes it: the Datasheet link on this page opens it.
Where can I order the IP1001C?
JLCPCB lists it as part C703551, with 0 in stock; the sellers' links on this page open their listings.