HT-PLP-300+
HenryTechExtended
- Part id
- henrytech/HT-PLP-300+
- Category
- RF Filters
- Pins
- 8
- In stock
- 0 at JLCPCB (C5344888)
Overview
The HT-PLP-300+ is a RF Filter made by HenryTech with 8 pins.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:SXBP-375+, from EasyEDA) and its footprint (EasyEDA_Cloud:FILTER-TH_8P-L20.0-W10.0-P5.08-S5.08-D0.8, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C5344888).
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | INPUT | Unspecified |
| 2 | GND | Unspecified |
| 3 | GND | Unspecified |
| 4 | GND | Unspecified |
| 5 | GND | Unspecified |
| 6 | GND | Unspecified |
| 7 | GND | Unspecified |
| 8 | OUTPUT | Unspecified |
Parts like it
8
Questions
Is there a KiCad symbol and footprint for the HT-PLP-300+?
Yes. The symbol is EasyEDA_Cloud:SXBP-375+ and the footprint EasyEDA_Cloud:FILTER-TH_8P-L20.0-W10.0-P5.08-S5.08-D0.8, both drawn on this page. PCBKit places them on a board for you when you design with it.
Where is the HT-PLP-300+ datasheet?
HenryTech publishes it: the Datasheet link on this page opens it.
Where can I order the HT-PLP-300+?
JLCPCB lists it as part C5344888, with 0 in stock; the sellers' links on this page open their listings.
What can replace the HT-PLP-300+?
Parts like it in the library: the HT-PBP-60+ by HenryTech, the HT-PLP-1.9+ by HenryTech, the HT-PLP-10.7+ by HenryTech and the HT-PLP-100+ by HenryTech. Check their datasheets: a part that fits the footprint may still differ in its ratings.