Skip to the content
321

LM7805CTG

HANSCHIP semiconductorExtended

0℃~+85℃@(Ta) 1 1A 2V@(1A) 35V 42uV 5V 5mA 73dB@(120Hz) Fixed Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
hanschip-semiconductor/LM7805CTG
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
3
In stock
393 at JLCPCB (C2977083)
Used on
4 open-source boards

Overview

The LM7805CTG is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HANSCHIP semiconductor in a TO-220 package with 3 pins. 0℃~+85℃@(Ta) 1 1A 2V@(1A) 35V 42uV 5V 5mA 73dB@(120Hz) Fixed Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (LibrePCB_Base:TO-220AB_Vertical, from Librepcb), ready for a KiCad board. 393 are in stock at JLCPCB (part C2977083). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

321
LibrePCB_Base:TO-220AB_VerticalFrom Librepcb

Pinout

3
The pins of the LM7805CTG
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

4
  • 2 layers137.2 × 83.8 mmPWA REV2, the printed circuit board in 3D

    PWA REV2

    PubInv/krake

    The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

    215 parts9AGPL-3.0
  • 2 layers137.2 × 83.8 mmGeneralPurposeAlarmDevicePCB, the printed circuit board in 3D

    GeneralPurposeAlarmDevicePCB

    PubInv/general-purpose-alarm-device

    A general purpose alarm device (with software) as a module for medical devices (and others)

    140 parts7AGPL-3.0
  • 2 layers113.1 × 52.7 mmHomeWork2, the printed circuit board in 3D

    HomeWork2

    PubInv/PMD_-pseudo-medical-device-aka-Homework2-

    In this repo I am practicing KICAD. Created an ESP32 DevKit V1 module and a PCB footprint. I designed a circuit around this ESP32 consisting of six lamps, four switches, and two power jacks and added a voltage…

    60 parts
  • 2 layers137.2 × 83.8 mmPCBa KRAKE, the printed circuit board in 3D

    PCBa KRAKE

    PubInv/krake

    The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

    195 parts9AGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7805CTG?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint LibrePCB_Base:TO-220AB_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7805CTG?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LM7805CTG datasheet?

HANSCHIP semiconductor publishes it: the Datasheet link on this page opens it.

Where can I order the LM7805CTG?

JLCPCB lists it as part C2977083, with 393 in stock; the sellers' links on this page open their listings.

What can replace the LM7805CTG?

Parts like it in the library: the AMS1117-5.0 by Advanced Monolithic Systems, the L7805CDT-TR by STMicroelectronics, the AMS1117-5.0 by UMW and the L7805CV by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7805CTG?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.